Low & Slow Quad Cab V2.0

[Talon84x4]

the last one was just a fitting of the door, it still needs to get ripped along the top and leveled out since stock doors taper down to the front fender

[4x4yota]

makes me want to make my 81 a quad cab/4door

[BUDDERS]

I don't think I ever realized the top part of the door had a taper in it.  That picture sure makes it obvious though.

[Talon84x4]

Finally got to get back to work on this today, been a busy couple of weeks

almost got the whole door hinge section done, just a little more patch work and then grind it down


a little door work


For anyone interested, the bed, bed tool box, and spare carrier will off the truck and for sale after a trip in April: http://board.marlincrawler.com/index.php?topic=67988.0

[82juguete]

Very nice... You end up using the 110 welder?  Looks like you are having an easier time getting buildup on your welds.  My 220 wants to blow through that thin sheetmetal no matter how i set it.

[Talon84x4]

Very nice... You end up using the 110 welder?  Looks like you are having an easier time getting buildup on your welds.  My 220 wants to blow through that thin sheetmetal no matter how i set it.

I started with the 110 and it was working great until i ran out of wire for it, then I started to use the 220 just to see if I could get something done with it and it has been doing well so far. It still blows through the thin stuff, but the metal on the door jams and floor are a little thicker than the rest of the stuff on the cab so I haven't had too much trouble. I still get some sections that just disintegrate on me even though everything i've welded on it has been all tack welds...tons of tack welds

[BUDDERS]

Very nice Talon.  That's what I thought needed to happen with those doors.

[LilGonzo86]

looking good talon its going to be sweet....

[Redbeard1]

You are giving me evil thoughts...


inspiration for you

[GONZO97]

You are giving me evil thoughts...

DO IT! 

[Redbeard1]

DO IT! 

need to find another cab  heheheh

[THK Matt]

You are giving me evil thoughts...


inspiration for you

itd be nice for one of these guys that have one... to post up what there rear door jams look like..

[yota_krawler]

i just think its floppin' stupid that the US didnt get any

crew cab toys are so bling

[axled89]

damn that's alot of fabing.   but will be worth it in the end.   

[Redbeard1]

Ok you talked me into it I got another cab today, I pick it up next week on one of my days off...

[GONZO97]

Ok you talked me into it I got another cab today, I pick it up next week on one of my days off...

Bravo

[86bobbedtoy]

I just did a 3rd gen 4 door,
and mayberry is doing a 4door runner

I love it,
seems like so many people are into toys nowdays that we seem to have the same thing.

change is good
I want to have fun and let others experience the fun along with me
2 seats just wasent cutting it.
we had our baby 4 months ago and someday I think it would be cool to be able to take the whole family, plus a few

awesome work man, that sheet sucks to weld.

[Redbeard1]

Toyota the cure for gonojeeprrhea that nasty Vehicular Transmitted Disease that makes it burn when you pee...

[Talon84x4]

I just did a 3rd gen 4 door,
and mayberry is doing a 4door runner

I love it,
seems like so many people are into toys nowdays that we seem to have the same thing.

change is good
I want to have fun and let others experience the fun along with me
2 seats just wasent cutting it.
we had our baby 4 months ago and someday I think it would be cool to be able to take the whole family, plus a few

awesome work man, that sheet sucks to weld.

I couldn't agree more, i'd like to share what I love to do with more friends and family than just one other than me. And having something different then most around here is cool too. I like how clean and factory looking your 4 door has come out, very nice job. And thanks, I agree the sheet welding sucks.

[Redbeard1]

Somthing that will make welding the sheet metal easier is using a block of brass behind the weld area the weld wont stick to the brass and you have somthg solid to build a weld pool on. I use mole board shims off a motor grader good quality brass and cheep or free if you can gre some used ones.

[Talon84x4]

Somthing that will make welding the sheet metal easier is using a block of brass behind the weld area the weld wont stick to the brass and you have somthg solid to build a weld pool on. I use mole board shims off a motor grader good quality brass and cheep or free if you can gre some used ones.

Thank you for the tip, I will have to get some and try it out

[THK Matt]

[GONZO97]

x2 hows this coming along?

[Talon84x4]

I haven't had much time to work on it lately, and won't get to work on it for another week still

[THK Matt]

what a waste of 9 days

[chim]

We are going to need you to work way faster to settle our anticipation!! Awesome work!

[GONZO97]

im assuming your waiting for spring break like most of us are lol

[86bobbedtoy]

 

[DTMRWC]

Keep up the good work look's awsome!  :

[Talon84x4]

Just got back from Calico monday morning and started stripping the truck down





with the bed off and doing some quick measuring, the tank will be moved back 3"

Also thinking about a partial exo instead of an interior cage