Glen's budget rebuild

Started by 79coyotefrg, September 26, 2004, 05:30:02 PM

0 Members and 39 Guests are viewing this topic.

79coyotefrg

i think it will clear  histeer


3-4 inches  more like 4
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

well my scrounging and pack ratting skills finally paid off,  I am now the proud owner of a Marlin dual transfer case 2.28X2.28 = :woohoo:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4

:rofl:  i love the stiches on the tire  that is so pricless
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

:dunno:  hey  you do whatcha gotta do
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Rocksurfer

Quote from: 79Coyotefrg on January 22, 2006, 09:10:32 AM
well my scrounging and pack ratting skills finally paid off,  I am now the proud owner of a Marlin dual transfer case 2.28X2.28 = :woohoo:


Whoa Glen where'd you pick that up.

:woohoo:
                                                                                                                                                                                                     :woohoo:                                           
                                                       :woohoo:                                 
                                                                             :woohoo:                                 
                                                                                                              :woohoo:   
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

79coyotefrg

i found it sitting in a cabbage patch,   it appeared to be a orphan  :eyebrow:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Rocksurfer

Well lucky you, now quit staring at it and put it in, doesn't do you any good as a passenger in your truck.
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

79coyotefrg

i gotta  hold it and :therethere:  and :love: it a while

besides its :rain: here
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Rocksurfer

 :laugh: Sure is purdy, now don't lose control and muck it up while you are :therethere: it. :gap:
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

unclejpl4x4

:nonono: thos are not what thos hole are for glen
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

BUBBA

87 4runner 350 with custom dent package. 
My budget beater

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

kneedownnate

So where'd ya snag such a clean setup from Glen?
RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!

Rocksurfer

Quote from: kneedownnate on January 22, 2006, 08:21:44 PM
So where'd ya snag such a clean setup from Glen?

I'm guessing that when he went to Glimmer he hit Angelo over the head and got it out of the Formula. :yupyup:
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

blackdiamond

Now that you have duals, how about something else to add some traction?
:think:
:idea:
I have an idea...it is in a box in my garage wrapped in bubble packing  :gap:
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

79coyotefrg

i already have a elocker in ther rear,  just aint got it wired up yet

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

reklund5

Glen

You'd better be careful with all these  :bling: parts on your rig....somebody might make you wheel it someday!

I say get it ready and come out to NM for the Chile Challenge in February!  Who cares if it's raining- GET TO WORK!

Keep the pictures coming...

Ryan
'84 Hilux, locked, dual-cased, winched, EFI converted, 37" tired, half-doored (in the summer...)
'87 Supra, 400 HP.  smooth as glass at 130 'cause my tires are NEW!...
'92 F250 Diesel, tow rig, ATS Turbo, leveling kit, killer stereo

79coyotefrg

Ryan  old buddy  all i have to say is :smooch:   :eek:  :rofl2:  yea i know i did more hard stuff saturday than i should have


i wish new mexico wasnt so far away :thud:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

Quote from: blackdiamond on January 22, 2006, 08:45:56 PM
Now that you have duals, how about something else to add some traction?
:think:
:idea:
I have an idea...it is in a box in my garage wrapped in bubble packing :gap:
:smack:  i forgot about the truetrac   :thud:  :screwy: 



:eyebrow:  tax time is near :whistle:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

blackdiamond

I am just now putting together this thread and the "getting better" thread.  It all makes sense when considering the emails about your cash source. :hammerhead:
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

79coyotefrg

:therethere:  yea i got the scars to prove it if you have a strong stomach
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

blackdiamond

Quote from: 79Coyotefrg on January 23, 2006, 04:46:34 PM
:therethere:  yea i got the scars to prove it if you have a strong stomach

Is the story posted somewhere that I have missed?
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

Rocksurfer

Quote from: blackdiamond on January 23, 2006, 08:37:31 PM
Is the story posted somewhere that I have missed?

That's what the "Get Better Glen Thread" is all about.
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

79coyotefrg

Quote from: blackdiamond on January 23, 2006, 08:37:31 PM
Is the story posted somewhere that I have missed?
go back and read the first couple pages of the get better thread
last january  we thought i had cancer,  then i had surgery to remove the "tumor"  which turned out to be a badly infected and inflamed lymph node,  which the doctor said would have gone cancerous soon

it goes on from there :thud:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

anyone know if theres a adapter for a 3.0 dodge minivan engine to toyota tranny out there :dunno:  i have one of them
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#267
well i did a compression test today, i had 130psi  on all 4
not bad i guess it was 60 dgrees outside and the engine was cold
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

Maybe a 5MGE  wouldnt be a bad idea :thud:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

ah hah  now i know :eek:   thats a option,  i would much rather have a deisel though
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way