Glen's budget rebuild

[79coyotefrg]

1 inch shouldn't be too bad, 2 inch is all I'm aware of so you must be doing a custom job. Goodluck, try and make them have as much surface area as possible or when the body shifts a little here and there it won't rub a hole in your floorboard. My nephew had that happen on his 86 Toy though his thing was jumping it.

i was going to chop some 4 inch channel  and plate the other side for a 4x5x1 lift block  but i kinda like the hockey puck idea

they are like 4 inch diameter right??

[79coyotefrg]

ok,  i got pics ,

wht about using some old timing gears for a 1 inch spacer

[79coyotefrg]

 

[79coyotefrg]

i think 1 inch will be enough dont you??

[Lady Di]

It's not the size, it's how you use it

[79coyotefrg]

   wimmins 

[79coyotefrg]

got the shifters in and the tranny and crawler boot on   

going to wait on the tcase boot till i lift the body

[toybuilt]

It looks like 1" would just be enough room from the cab to the trans, I'd do it  . Hockey pucks sound like the way to go, thats kinda cool.

[V-Man]

I never thought of those suckers. They'd be perfect and I bet they are a dime a dozen up there.

  No. But if you have many dozens of dimes you can get one..

[V-Man]

send me a dozen 

Ok Here They come:
                     

By the way I had better double check your address..and could you PLS PM me with the spec on your computer..

Address, and computer specs.. PLS

[Rocksurfer]

I know you plan on doing the body but I did find a picture of the spacers.

[79coyotefrg]

not much going on here since the new tranny

[boggerunner]

so how did u end up spacing the new tranny in, i used a sledge hammer for my w56 and dual tcases in my 79, and the first swap i did was a 22re, i hate carbs

[79coyotefrg]

cabs kinda sittin on it at the moment  but i have a 1 inch body lift planned

[79coyotefrg]

 

[brainlessfool]

just cut out the tunnel where it's hitting the trans! 

[79coyotefrg]

[Rocksurfer]

just cut out the tunnel where it's hitting the trans! 

That sir is sacrilege

[79coyotefrg]

aint that the dang truth

[brainlessfool]

Whitie would do it!

[79coyotefrg]

[brainlessfool]

you KNOW he would! 

[Rocksurfer]

you KNOW he would! 

Doesn't make it right

[79coyotefrg]

it almost made me cry when i cut the hole for the crawlbox shifter

[brainlessfool]

it almost made me cry when i cut the hole for the crawlbox shifter

SUCK IT UP GIRLY MAN!

cry? over that? over making you rig better?

Come on dude, show some foratood. BE A MAN! not some "girly man"! 

And if whitie would do it, WHITIE MAKES RIGHT!   

Yall have a nice day.

[79coyotefrg]

 

[Rocksurfer]

Don't worry Glen he's like a virus, he gets in easy, is hard to get rid of but you'll build an immunity once you finally get rid of him.

[boggerunner]

does it hurt to see a 79 yota bashed up?
because i definantly crumpled my drivers side cab corner last night

[79coyotefrg]

   dont make me

[79coyotefrg]

you know,  i had been thinking about what someone had said about the msd ignition having a longer spark than the 22R dist,  so i happened to think  why not put a 20R distributor in the 22R head,  so idid,  but first i looked at the resistance and the 20R was definitely has a stronger ability of a spark.

so i pulled the 22R distributor and replaced it with my old 20R distributor  and

DUDE 

  i now have a pair of nice wide black stripes  about 10 feet long in my driveway   

THE 20R DISTRIBUTOR  DOES DELIVER A LONGER SPARK