Glen's budget rebuild

Started by 79coyotefrg, September 26, 2004, 05:30:02 PM

0 Members and 3 Guests are viewing this topic.

Print
Go Down Pages 1 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 ... 105
User actions

79coyotefrg

#780
December 31, 2006, 06:22:16 PM
MAN  rock rash  is BAD


:ack:  but  nothin is leaking  :woohoo:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#781
January 01, 2007, 12:15:02 AM
Quote from: 79coyotefrg on December 31, 2006, 06:22:16 PM
MAN  rock rash  is BAD


:ack:  but  nothin is leaking  :woohoo:
What no pictures   ::)  I want to see some wheeling pics. If ya don't have pictures then I know I didn't miss anything!
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#782
January 01, 2007, 05:01:21 AM
 :cheese: the blue  and black truck  you see is dennis Fant, from Kirby AR


Brendan  and April  are behind him
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#783
January 09, 2007, 05:47:22 PM
sliders coming soon  :woohoo:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#784
January 09, 2007, 05:59:24 PM
Quote from: 79coyotefrg on January 09, 2007, 05:47:22 PM
sliders coming soon  :woohoo:
Not if ya don't get me those measurements!
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#785
January 09, 2007, 06:06:25 PM
Quote from: gittinit on January 09, 2007, 05:59:24 PM
Not if ya don't get me those measurements!
:rivers:  i sat down with a notepad, pencil  tape measure  and soapstick  and  measured the frame  and mom came out  and  asked me to go get  something from town  and  thats as far as i got  :rivers:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#786
January 09, 2007, 06:16:57 PM
   excuses!   excuses!  Come to think of it I never recieved that last set of pics you were gonna send me.  :shake:
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#787
January 09, 2007, 06:18:56 PM
i never got any  :dunno:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#788
January 09, 2007, 06:23:10 PM
Quote from: 79coyotefrg on January 09, 2007, 06:18:56 PM
i never got any  :dunno:
Well that explains it!
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

BUBBA

#789
January 10, 2007, 03:41:07 PM
now he really has no excuse,I wrote the measurments down for him earlier
87 4runner 350 with custom dent package. 
My budget beater

79coyotefrg

#790
January 10, 2007, 05:57:44 PM
OK  are you ready  for dimensions ??
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#791
January 10, 2007, 06:06:25 PM
ok,  outside  rail  i figure  56 " from outside edge to outside edge,
front  needs to be 15" from frame to inside of bend
then  the rear most  bend  is 11 inches to frame

| <15 inches                       |
|________________________|  < 11 inches  to the inside
                ^
                56 inches
then i need 3 tubed  from outer bar to frame  11 inches,
and 1 - 12 inches

this  is obviously  for the drivers side,  then  the same measurements  reversed  for the right side
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#792
January 10, 2007, 06:22:05 PM
no habla espaniol
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#793
January 10, 2007, 06:25:09 PM
:eek:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#794
January 10, 2007, 06:40:00 PM
ok  at the front  im gonna weld it to the fraME  just behing the cab mount,  come out  15 inches,  9  to  the  rocker,  then 6 more  outside the rocker

then  run to the back  and turn in 11 inches  back to the frame  just above the hanger for the rear springs  5 from the frame  the 6 fromt the edge of the body
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#795
January 19, 2007, 12:11:21 PM Last Edit: January 19, 2007, 12:17:09 PM by gittinit
Quote from: 79coyotefrg on January 09, 2007, 05:47:22 PM
sliders coming soon  :woohoo:
Well here they are finally! Yo never said how long so I built them the same as marlin's 56'' I think. Make shure the length will work, if not let me know.

Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

insane04

#796
January 19, 2007, 01:45:30 PM
those are fancy ones glen!! :beerchug:

alwayzbroken

#797
January 19, 2007, 01:59:45 PM
Nice work Michael  :beerchug:
If you still have control you aren't going fast enough

79coyotefrg

#798
January 19, 2007, 04:41:52 PM
looks damn good,  we might have a full time job for you :yesnod:

um  if you look at my post above i said 56 inches :yesnod:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#799
January 19, 2007, 05:57:52 PM
I still have to make the legs for these things.  Do not forget that rear axle, or I'll have to put these in the for sale section. If any one else is interested in a set (any design) let me know couse I need the money. This particular set is verry heavy duty about 3/16 wall.
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#800
January 19, 2007, 06:02:05 PM
:woohoo:   hey i already disassembled  number 5  so i can get it in the truck
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#801
January 19, 2007, 06:02:45 PM
Quote from: 79coyotefrg on January 19, 2007, 06:02:05 PM
:woohoo:   hey i already disassembled  number 5  so i can get it in the truck

Number 5 ???? :headscratch:
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#802
January 19, 2007, 06:15:58 PM
:rofl:   havent you seen that movie,  the robot  #5 ,  runs around  saying, "NO DISSASSEMBLE"

:haha:

i  took the rear axle apart,  sold the 3rd  but  you didnt want the 3rd anyway
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Gittinit

#803
January 19, 2007, 06:19:59 PM
Quote from: 79coyotefrg on January 19, 2007, 06:15:58 PM
:rofl:   havent you seen that movie,  the robot  #5 ,  runs around  saying, "NO DISSASSEMBLE"

:haha:

i  took the rear axle apart,  sold the 3rd  but  you didnt want the 3rd anyway

I got a line on some 4.30's to put in it under the new buggie, if I ever get that far.
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

YotaJosh

#804
January 19, 2007, 07:14:24 PM
Quote from: gittinit on January 19, 2007, 05:57:52 PM
I still have to make the legs for these things.  Do not forget that rear axle, or I'll have to put these in the for sale section. If any one else is interested in a set (any design) let me know couse I need the money. This particular set is verry heavy duty about 3/16 wall.

Oh yeah, how much? And can you make tube bumpers?
'79 Short Bed Pickup 4x4
'04 4Runner V8 Sport 4x2

Gittinit

#805
January 19, 2007, 08:05:48 PM
Quote from: YotaJosh on January 19, 2007, 07:14:24 PM
Oh yeah, how much? And can you make tube bumpers?

Yes tube bumpers are a go, but i don't have a stock type truck to mock one up. on price it all depends on what you want. Custom designs welcome.
Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

79coyotefrg

#806
January 30, 2007, 09:55:24 AM
new sliders  look good  :woohoo:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

YotaJosh

#807
January 30, 2007, 02:34:16 PM
'79 Short Bed Pickup 4x4
'04 4Runner V8 Sport 4x2

alwayzbroken

#808
January 30, 2007, 04:36:07 PM
Quote from: YotaJosh on January 30, 2007, 02:34:16 PM
:worthless:

He is like 5 states from home at his brother's pad.
If you still have control you aren't going fast enough

79coyotefrg

#809
January 30, 2007, 05:32:20 PM
900 miles  :down:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way
Print
Go Up Pages 1 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 ... 105
User actions