IC's linked 88 on fodees Saturn 1.9l engine swap

Started by IronClad, December 06, 2007, 10:22:44 AM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
User actions

IronClad

#270
February 08, 2011, 02:33:39 PM
some new hotness showed up today !



and yesterday my hoops came.. sunday i got some new rotors and had them machined by a buddy. Headin to the junkyard tomorrow if i dont work to get my springs and i should be set!
Annihilation  Fabrication
Do you need a Hammer?
My build thingy... http://board.marlincrawler.com/index.php?topic=39885.0
（╯°□°）╯︵ ┻━┻
Word hard, Keep your head in the game and if anyone gets in your way tell them you don't give a damn !

91 ex-cab

#271
February 08, 2011, 03:22:57 PM
Are you gonna box the bottom of that thing?

bigarms23

#272
February 08, 2011, 06:20:21 PM
you better mine has seen better days
88 4runner 2016 5.3 auto atlas 2 on tons and tons of fun

IronClad

#273
February 08, 2011, 06:33:58 PM
I might. Im pretty lazy though so i probably wont end up doing it
Annihilation  Fabrication
Do you need a Hammer?
My build thingy... http://board.marlincrawler.com/index.php?topic=39885.0
（╯°□°）╯︵ ┻━┻
Word hard, Keep your head in the game and if anyone gets in your way tell them you don't give a damn !

IronClad

#274
February 12, 2011, 08:41:20 PM Last Edit: February 12, 2011, 09:07:43 PM by IronClad
Got it on its own weight on the front! Just need to do shocks and its pretty dialed. Should have the rear on its own weight tomorrow hopefully anyway.   Heres some crappy cell pics. I'll get some better omes tomorrow.





Dont think its going to be toooo tall. I hope lol
Annihilation  Fabrication
Do you need a Hammer?
My build thingy... http://board.marlincrawler.com/index.php?topic=39885.0
（╯°□°）╯︵ ┻━┻
Word hard, Keep your head in the game and if anyone gets in your way tell them you don't give a damn !

THK Matt

#275
February 12, 2011, 08:44:02 PM
THATS SICK! so wide!
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

86bobbedtoy

#276
February 12, 2011, 09:46:04 PM
way crazy that f axle is way out there!
looks better every page

Dingman.

#277
February 13, 2011, 10:16:12 PM
Looks good matt

91 ex-cab

#278
February 13, 2011, 10:19:08 PM
Do you still have the drw hubs on? or what backspacing are those rims?

THK Matt

#279
February 14, 2011, 05:42:33 AM
Quote from: 91 ex-cab on February 13, 2011, 10:19:08 PM
Do you still have the drw hubs on? or what backspacing are those rims?

those are custom 6 lug hubs
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

IronClad

#280
February 14, 2011, 09:08:06 AM Last Edit: February 14, 2011, 09:40:27 AM by IronClad
Quote from: 91 ex-cab on February 13, 2011, 10:19:08 PM
Do you still have the drw hubs on? or what backspacing are those rims?


yerp custom 6 lug hubs (stock SRW wms) and the rims are 2.5" bs
Annihilation  Fabrication
Do you need a Hammer?
My build thingy... http://board.marlincrawler.com/index.php?topic=39885.0
（╯°□°）╯︵ ┻━┻
Word hard, Keep your head in the game and if anyone gets in your way tell them you don't give a damn !

lilbuddy

#281
February 14, 2011, 12:40:34 PM
why are you going to run 2.5" wheels on a 69.5" front axle? thats a little excessive dude.
RIP Kyota.... you are the man

GET IT!!!

IronClad

#282
February 14, 2011, 12:42:26 PM
because i have them.  dont feel like going and buying new wheels. the other option is my 15x12 aluminum wheels but they bring the suck
Annihilation  Fabrication
Do you need a Hammer?
My build thingy... http://board.marlincrawler.com/index.php?topic=39885.0
（╯°□°）╯︵ ┻━┻
Word hard, Keep your head in the game and if anyone gets in your way tell them you don't give a damn !

IronClad

#284
February 16, 2011, 04:25:47 PM
Alright got the rear end on the ground and where i want it. Its a little tall in the rear right now but i also dont have the gas tank or the battery back there yet.. and i also dont have my motor, tranny and tcases in either. its about 30" to the frame right now and 6'5 to the roof. yes its a tall pregnant dog but i see it dropping a few inches once i get all the weight in it.

Heres some pics and before any of you idiots yammer on about OMFG ARE YOU GONNA BRACE THAT OMG ITS SO TALL WTF ZOMG YER GONNA FINISH WELDING THAT RIGHT ?  most of it is just tacked on to get an idea of where i want things and no im not done welding/bracing :pokinit:









Annihilation  Fabrication
Do you need a Hammer?
My build thingy... http://board.marlincrawler.com/index.php?topic=39885.0
（╯°□°）╯︵ ┻━┻
Word hard, Keep your head in the game and if anyone gets in your way tell them you don't give a damn !

86bobbedtoy

#286
February 16, 2011, 07:32:01 PM
I think it looks good!
yeah way tall, but see where it is at in the end.
I like the rear link setup!!

ToYocRawleR

#287
February 16, 2011, 08:17:05 PM
Looks like a good start! Nice build!
-
Rigs:
05 F-250 Powerstroke
93 RunneR ...Build-up  http://board.marlincrawler.com/index.php?topic=85644.0

fortysixandtwo - I drove through Dunsmuir once I dont think anything there is "super nice"
Just kidding man. I guess there is, its your bed

Dingman.

#288
February 16, 2011, 09:41:12 PM
Sooo. When you building your mudflaps and fender flares for all 4 corners? :gap:

IronClad

#289
February 16, 2011, 09:53:15 PM
haha already have my flaps and stuff! well for the back.. we'll see how long it takes before i get hassled about the front. but she sure is a wide pregnant dog. Was thinking about getting some 37x12.50s for the street but we'll see
Annihilation  Fabrication
Do you need a Hammer?
My build thingy... http://board.marlincrawler.com/index.php?topic=39885.0
（╯°□°）╯︵ ┻━┻
Word hard, Keep your head in the game and if anyone gets in your way tell them you don't give a damn !

THK Matt

#290
February 16, 2011, 09:56:52 PM
VERY NICE MATT!

my 87 is sittin at 7" to the roof LOL and 25.5in to the frame
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

IronClad

#291
February 27, 2011, 07:54:04 PM
Soo i got some work done on it this weekend. Yesterday at like 3pm i decided i was going to transfer the wiring harness' and whatnot so got that mostly done and today i finished that up and drug the pig outside to slide the motor tranny and cases in.. which was an ordeal and a half not having a body lift and welding suspension mounts in with tight tolerances out back. Also got my steering finished last weekend i think it was. Heres a couple pics, i'll get some more tomorrow  probably







Note the rear end is sagging because it was ratchet strapped down so i could get it out of the garage haha
Annihilation  Fabrication
Do you need a Hammer?
My build thingy... http://board.marlincrawler.com/index.php?topic=39885.0
（╯°□°）╯︵ ┻━┻
Word hard, Keep your head in the game and if anyone gets in your way tell them you don't give a damn !

wakkjobb

#292
February 27, 2011, 08:25:48 PM
Me likey dem linkeys...  :eyebrow:

QuoteOMFG ARE YOU GONNA BRACE THAT OMG ITS SO TALL WTF ZOMG YER GONNA FINISH WELDING THAT RIGHT ?
Ha... about spit out my beer at that! What welder do you have, looks like a 135?

>>Dan
ASE certified shadetree mechanic and spoon operator
QuoteIronClad: If I wanted to hold hands and be nice I'd become a hippie.
85 4Runner, duals, 38s, 5.29s, locked, 3.4 swapped, GranVille Edition

IronClad

#293
February 27, 2011, 08:26:45 PM
its a 175
Annihilation  Fabrication
Do you need a Hammer?
My build thingy... http://board.marlincrawler.com/index.php?topic=39885.0
（╯°□°）╯︵ ┻━┻
Word hard, Keep your head in the game and if anyone gets in your way tell them you don't give a damn !

86bobbedtoy

#294
February 27, 2011, 08:28:11 PM
well it rolls on all 4s
glad to hear the progress

wakkjobb

#295
February 27, 2011, 08:29:22 PM
Guess I need a stronger eyeglass perscription sooner than later...  :lipsrsealed:

Bad-ass build though; you gonna cage it or anything? I haven't read the whole thread... skimmed a bit; ADD and all that.

>>Dan
ASE certified shadetree mechanic and spoon operator
QuoteIronClad: If I wanted to hold hands and be nice I'd become a hippie.
85 4Runner, duals, 38s, 5.29s, locked, 3.4 swapped, GranVille Edition

IronClad

#296
February 27, 2011, 08:43:10 PM
yeah its going to get caged soon and i still need to build my bumpers. Im hoping to have it ready to rock by my bday on march 21st so crossing my fingers
Annihilation  Fabrication
Do you need a Hammer?
My build thingy... http://board.marlincrawler.com/index.php?topic=39885.0
（╯°□°）╯︵ ┻━┻
Word hard, Keep your head in the game and if anyone gets in your way tell them you don't give a damn !

kneedownnate

#297
February 27, 2011, 08:51:19 PM
Looks pimp mang  ;)
RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!

Dingman.

#298
February 28, 2011, 03:09:37 AM
You need this but a motified set that reaches the ground.  :haha:
http://www.pplmotorhomes.com/parts/rv-tow-bars-dollies/ibc-splash-guards.htm

yota_krawler

#299
February 28, 2011, 05:10:41 PM
Lol

Put that :pokinit: on matt
Tow Rig: 2006 GMC Sierra Crew Cab: lift and tires.
Wheeler: 1985 Toyota 4runner Semi Built: project http://board.marlincrawler.com/index.php?topic=89681.msg1013539#msg1013539
Print
Go Up Pages 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
User actions