CTENG_TowRig: The Beastmaster has gone to a new owner.

Started by CTENG in KS, June 12, 2007, 11:35:02 AM

0 Members and 2 Guests are viewing this topic.

CTENG in KS

Some DA parked his Dodge so close to the Beastmaster I couldn't get the seat out the side door so I couldn't put the rear carpet in today...arrg!
What I did do was try the duplicolor graphite wheel paint on one of the nasty wheels...it came out kinda odd...
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

tom w.


CTENG in KS

I came up just short of what I needed for carpet with the berber remnant so I decided to use some cheap outdoor carpeting from Lowes.  It went in pretty easy, just need different hardware to screw the floor in with and I can get to the seating issue.  I will probably make a throw mat outta the berber left over to put at the feet of the rear bench.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

I tried a different paint on another wheel...this is regular hammertone silver.  Opinions?
Before and after:
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

DTB

RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

FATTshack


Tice

I don't need a winch, I wheel a TOYOTA!!!!!!!


www.wheelingarizona.com

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Duffil

yeah, silver looks WAY better.  Are you gonna try black as well?

CTENG in KS

I think I may just go silver, the paint went on much better.  If I had the time and inclination to really clean the wheels up the graphite paint would prob go on much smoother, but it just look like crap up close.  I don't wanna get into more colors cause I will be painting wheels for the next 6 months.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

jimbo74

i actually like the graphite color a little bit better, but i think with the look of the silver on the beastmaster if you plan on keeping the chromed trim tha tthe silver fits the vehicle better
the silver looks more liek an oem would
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

jimbo74

als owanted to add that the beastmaster is looking tons better than it did when you first got it... :thumbs:
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

CTENG in KS

Thanks Jimbo...I am thinking of hitting up the PnP to check out some seats after werk today...see if they have some comfy captains chairs for me.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

jimbo74

some of them actually hve pretty good seats, i got a set of sr5 toyota seats that felt good still for $75 for the pair with the seat belts....
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

Rocksurfer

Alcoa's would look real nice on there.
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

CTENG in KS

Went over to a couple salvage yards to see about some seats and holy smoke they think those things are worth their weight in gold.  Cmon, 2001 Escape seats for $350...no wonder they are all sitting dusty in a shed.

So I got to exploring my options and decided I can probably fix up the seats and seat tracks I have enough that they will be usable for the time being.  I certainly have other MCR necessities I need to buy that are higher on the money list than seats.  The other thing is, none of the seats at the yards have armrests...vans need armrests.

So here is the fixed up passenger seat bottom...get them cleaned up a bit and throw some new covers on there and call it good for now.  Here is the before and after...little better and the sliders at least slide now.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

gtoyonrocks

Looks like she is coming along.
1985 toy, Hybrid 20r/22r on propane, 30splines, custom built leaf packs, welded front and rear diffs, dual ultimate crawler, full hydro, full exo, flat bed, 37' mtrs

jb1981

that thing looks pretty sweet.  i saw another one of those in ventura, ca and had to do a double take.

FatAzzRunner

Damn CTENG, I havent been on MC for probablly 2-4 months and this is the first time I saw this thread.............COOL AS HELL!!!!!!!!  I would so pimp that thing out if it were mine.  You are doing some good work there man.  I am suprised the apartment manager hasnt bitched though. 

If it were mine I woud be thinkin, shag roof and a disco ball and some old style craiger 5 stars!!!   :driving: :driving:

I would also stick some tall home stereo speakers in there for the tunes and CRUIISSSEEEEEEEE.

So, you are doing this to go to CA for the next big run??? When is it?  I am dying to wheel California

85 Runner, 5" All-Pro Extreme Lift, Complete Marlin T-Case with new TS 4.7 gears, Super Birfields(Longfields), 5:29's, Detroited front, Spooled rear, 36" TSL's, Bikini top.

Yes, Livin in Kansas sucks azz!!

79coyotefrg

september 7th  is when they plan to leave i think
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Rocksurfer

Campfire Girl would have expected something like this to show up in my driveway, now she thinks everyone one on the board here is just like me. We all buy ugly old trucks and think they look cool........


























.... and to that I say  :yesnod:
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

Lady Di

Wow, this is coming along great! And I agree with the silver on the wheel even though I'm a bit late.
We (the Mammoths) will be leaving FL either late on the 6th or early on the 7th, we figure we'll probably be in CT's area by the 9th and we'll hook up somewhere along I-40 and caravan from there :hyper:
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

Lady Di

Quote from: Rocksurfer on July 29, 2007, 08:33:12 AM
Campfire Girl would have expected something like this to show up in my driveway, now she thinks everyone one on the board here is just like me. We all buy ugly old trucks and think they look cool........

.... and to that I say  :yesnod:

absamalutely!  :thumbs:
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

Rocksurfer

You guys absolutely must stop by, lunch is on me.
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

Lady Di

are you along I-40 RS? Let us know where you are. PM me the details.
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

CTENG in KS

Went and found the cushiest seat covers I could due to the beat padding in the seats.  They aren't GREAT, but I gotta say they are COMFY.  I am going to trim and tuck them a bit to get a better fit.  only question now is should I use black vinyl to cover the armrests, or some of this upholstery fabric I picked up for the rear bench seat?
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

BUBBA

If the a/c works good i would say go with the vinyl,if not you'll just end up with sweaty arms.The upholstery fabric would probably be the best choice.
87 4runner 350 with custom dent package. 
My budget beater

CTENG in KS

Incredibly, the AC is pretty darn good.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

BUBBA

in that case go with the vinyl,it'll match your seat cover better
87 4runner 350 with custom dent package. 
My budget beater

CTENG in KS

I think that is what I will do.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0