Author Topic: Making Of The Willy Mammoth (Read 783622 times)

topar · « **Reply #2820 on:** Aug 02, 2007, 08:18:59 PM »

In the words of Scooby Rut Ro

79coyotefrg · « **Reply #2821 on:** Aug 02, 2007, 08:19:45 PM »

Quote from: Willy Mammoth on Aug 02, 2007, 08:17:29 PM

Maybe now I don't have to open the trans

red · « **Reply #2822 on:** Aug 02, 2007, 08:34:58 PM »

looks similar (but not as bad) as when i blew the bearing on the 10 bolt rear axle in my old 94 suburban.

Cheesemaker · « **Reply #2823 on:** Aug 02, 2007, 10:08:19 PM »

I have faith that Mark will have it done before ya leave! If not, I can see Mark working on the Mammoth, while Diane is driving the LBC!

Mark just make sure you a safety harness!

854RUN · « **Reply #2824 on:** Aug 02, 2007, 10:10:54 PM »

Awesome

. I always say if your going to brake it brake it dam good and that you did. I give you an A+, job well done.

That would be sweet if you don't have to tear in to the tranny but u mine as well since you got the kit right

Gibli · « **Reply #2825 on:** Aug 03, 2007, 02:07:43 AM »

Mark

get your ears de-waxed, you couldnt figure out the difference between your balls being squashed

and the sound of the tranny

Good luck with the repairs.

Willy Mammoth · « **Reply #2826 on:** Aug 03, 2007, 04:12:31 AM »

It wasn't till the very end that I could tell it wasn't the trans. It sounded like a bearing locking up and you could feel the drag, but it only did it for a second then it was alright again.

I did run the trans through the gears sitting still with the Tcase in N and did not here anything.

Once it started doing it all the time and the Jeep started to veer off to one side each time I figured it to be the rear end. Then I wanted it to stop cause I wasn't going to until we were home.

You should have seen the looks we got as it was dieing a miserable death.

Gibli · « **Reply #2827 on:** Aug 03, 2007, 04:45:48 AM »

I 've been through this once on the highway while overtaking a trailer at 40 MPH when my wife and kids started yelling our wheel is overtaking us, the damn thing was going faster than us. Lucky we didnt have a head on collision with on coming vehicles and slowly moved to the edge sparks and fireworks trailing behind. Thank the Lord for being here today.

Lady Di · « **Reply #2828 on:** Aug 03, 2007, 05:39:00 AM »

Quote from: Gibli on Aug 03, 2007, 04:45:48 AM

I 've been through this once on the highway while overtaking a trailer at 40 MPH when my wife and kids started yelling our wheel is overtaking us, the damn thing was going faster than us. Lucky we didnt have a head on collision with on coming vehicles and slowly moved to the edge sparks and fireworks trailing behind. Thank the Lord for being here today.

Gibli, I was dang ready to put on my 5 point when it really started screaming and Mark said the tire was wobbling. We were right around the corner from the house then so I just held on to the 'oh

' bar and hoped for the best.
But you know he only did this to get further toward our goal of 100 pages before MCR6

854RUN · « **Reply #2829 on:** Aug 03, 2007, 06:52:08 AM »

papa mike · « **Reply #2830 on:** Aug 03, 2007, 07:40:35 AM »

Quote from: Willy Mammoth on Aug 02, 2007, 06:42:42 PM

I pulled it apart and it don't look good.

If I am lucky I may be able to reuse the axle.

dang man that not lookin good

Duffil · « **Reply #2831 on:** Aug 03, 2007, 01:16:51 PM »

Mark, do you remember what calipers/rotors you used on the rear discs? or what page you did it on

edit: nevermind...I found it behind the search button.

tom w. · « **Reply #2832 on:** Aug 03, 2007, 01:20:55 PM »

Quote from: Duffil on Aug 03, 2007, 01:16:51 PM

edit: nevermind...I found it behind the search button.

That was probably the last place you looked for it, too...

...so where is it?

Duffil · « **Reply #2833 on:** Aug 03, 2007, 01:23:17 PM »

page 18

Cheesemaker · « **Reply #2834 on:** Aug 03, 2007, 01:24:48 PM »

Was that smoke in the first picture? (before u pulled the axle) Because it looked way cool!

A little Markification

Lady Di · « **Reply #2835 on:** Aug 03, 2007, 02:12:05 PM »

Quote from: cheesemaker on Aug 03, 2007, 01:24:48 PM

Was that smoke in the first picture? (before u pulled the axle) Because it looked way cool!

A little Markification

sure was!

Willy Mammoth · « **Reply #2836 on:** Aug 03, 2007, 03:32:45 PM »

I remmembered where I had extra axles, but if I remmember right they have twisted splines.

Remmember this thing?

Willy Mammoth · « **Reply #2837 on:** Aug 03, 2007, 04:29:44 PM »

Turns out only one is twisted.

Willy Mammoth · « **Reply #2838 on:** Aug 03, 2007, 04:31:24 PM »

And this is how it got twisted.

79coyotefrg · « **Reply #2839 on:** Aug 03, 2007, 06:21:50 PM »

Quote from: Willy Mammoth on Aug 03, 2007, 03:32:45 PM

Remmember this thing?

um NO

i think you been holding out on us

Lady Di · « **Reply #2840 on:** Aug 03, 2007, 06:31:15 PM »

Quote from: Willy Mammoth on Aug 03, 2007, 04:31:24 PM

And this is how it got twisted.

I remember that one

man I miss that truck, and those days

Willy Mammoth · « **Reply #2841 on:** Aug 04, 2007, 08:25:05 AM »

Now the fun begins.

5.29's to 4.88's

79coyotefrg · « **Reply #2842 on:** Aug 04, 2007, 08:32:18 AM »

*FFC* · « **Reply #2843 on:** Aug 04, 2007, 08:37:31 AM »

unclejpl4x4 · « **Reply #2844 on:** Aug 04, 2007, 08:48:47 AM »

what is that

Willy Mammoth · « **Reply #2845 on:** Aug 04, 2007, 08:50:31 AM »

Quote from: unclejpl4x4 on Aug 04, 2007, 08:48:47 AM

what is that

The air line going to the locker.

YotaJosh · « **Reply #2846 on:** Aug 04, 2007, 10:56:36 AM »

Sorry for the dumb question, but why do you have 3 diffs? Trail spare, or do you guys have another axle hiding under that thing?

Lady Di · « **Reply #2847 on:** Aug 04, 2007, 11:03:11 AM »

Trail spare. It's on the front bumper

FATTshack · « **Reply #2848 on:** Aug 04, 2007, 11:35:10 AM »

whatcha doing with the 5.29s?

Willy Mammoth · « **Reply #2849 on:** Aug 04, 2007, 11:37:21 AM »

Quote from: FATTshack on Aug 04, 2007, 11:35:10 AM

whatcha doing with the 5.29s?

Have not yet decided. I am going to hang on to them for now.

Willy Mammoth [OP]

Willy Mammoth [OP]

Willy Mammoth [OP]

Willy Mammoth [OP]

Willy Mammoth [OP]

Willy Mammoth [OP]

Willy Mammoth [OP]

Related Topics