Project BoostedRunner, SOLD

[pumkin toy]

yeah i ws stoked to find it!

[Jordan7118]

If I had a penny for every time the word "brah", "bro", "dude", "man", "stoked", "pumped", "awesome" were found in your thread, I would probably be a millionaire 


All joking aside, the progress is lookin' good. I wonder what it's like to drive a first gen runner with enough power to get out of it's own way     

<sigh> Back to the 22RE... 

[John Doe]

All joking aside, the progress is lookin' good. I wonder what it's like to drive a first gen runner with enough power to get out of it's own way     

<sigh> Back to the 22RE... 

I feel your pain Jordan

[Wermz84]

Nice looking work on the fenders.

[pumkin toy]

If I had a penny for every time the word "brah", "bro", "dude", "man", "stoked", "pumped", "awesome" were found in your thread, I would probably be a millionaire 


All joking aside, the progress is lookin' good. I wonder what it's like to drive a first gen runner with enough power to get out of it's own way     

<sigh> Back to the 22RE... 

ha ha all of us toyota guys are bro's around here!
thanks man, yeah its nice to be able to push 40's with 4:88 gears and still be able to accelerate in fifth gear on the highway

Nice looking work on the fenders.

thanks BRO!  ha ha

[pumkin toy]

Today I'm working on moving the rear axle back another inch, then I am going to hopefully get the rear fenders completely done this weekend too.

[pumkin toy]

I finished moving the axle back. Then I went over my welds and other areas that were not completely welded with some seamsealer

[swapped89]

fender tubbin looks good whats yer wheel base at now? did you just drill another hole in yer perches?

EDIT: From the inside it almost looks like its tubbed for some racing slicks.

[pumkin toy]

fender tubbin looks good whats yer wheel base at now? did you just drill another hole in yer perches?

looks like my wheelbase is about 110" now.  I drilled another hole in the perches. I also had a relocater plate in there before that moved it back an inch.  So now my center pin is basically not even on the spring perch anymore.  The centerpin is in the hole in the relocater plate, which is welded to the perch!

[mayberry]

i like the wells also i want to do simmilar but i want to follow the shape of the fender and go more square

[pumkin toy]

i like the wells also i want to do simmilar but i want to follow the shape of the fender and go more square

thanks, yeah for some reason I like the look of the rounded rear fenders better.

[mayberry]

for sure i do like when the tire tucks just perfect

[pumkin toy]

thats pretty much what happens!  it tucks up in there all close, but doesnt rub anything

[mayberry]

cool cool

[Skim]

What kind of springs are those front and rear ?

That looks killer on 4Ds.

[twistedtoy92]

  damn that things lookin good... My girly and I scored a CLEAN 88 runner with 166xxx miles on it;SR5, v6/5spd, COLD R12  A/C, cruise, power windows, power mirrors, tilt wheel, rear defrost, factory toyota tape deck, and it had the ORIGINAL plugs, wires, cap and rotor! Oh and did I mention sunroof?  I'll have to post up a build on it cant wait till I get my engine all done in the 85.... 

[THK Matt]

thats sick lookin Caleb!

[swapped89]

looks like my wheelbase is about 110" now.  I drilled another hole in the perches. I also had a relocater plate in there before that moved it back an inch.  So now my center pin is basically not even on the spring perch anymore.  The centerpin is in the hole in the relocater plate, which is welded to the perch!

Nice I have drilled my front perches, I was thinking about adding a relocator plate also. (only if i ever get 39.5s or somethin) seems kinda sketchy though for my DD up front. Might try it when i get a tow rig and trailer.

[pumkin toy]

What kind of springs are those front and rear ?

That looks killer on 4Ds.

front pack is an All-Pro "extra length" main leaf with waggy leaves.  rear are extended length Alcans, and thanks dude!

damn that things lookin good... My girly and I scored a CLEAN 88 runner with 166xxx miles on it;SR5, v6/5spd, COLD R12  A/C, cruise, power windows, power mirrors, tilt wheel, rear defrost, factory toyota tape deck, and it had the ORIGINAL plugs, wires, cap and rotor! Oh and did I mention sunroof?  I'll have to post up a build on it cant wait till I get my engine all done in the 85.... 

sounds like a sweet ride! I would love to have another stock deluxe model like mine as a DD. Does your rear window and everything related work well? JW because I have all the switches and relay's and stuff off of mine that I am selling.  All my rear window stuff worked perfect if you need anything.  Yeah post it up in the rig gallery man!

thats sick lookin Caleb!

thanks dude!

Nice I have drilled my front perches, I was thinking about adding a relocator plate also. (only if i ever get 39.5s or somethin) seems kinda sketchy though for my DD up front. Might try it when i get a tow rig and trailer.

yeah that could be kinda scetchy up front man!  I think mine should be pretty solid in the rear since I welded the relocater plate to the stock perch. Basically its like an extended perch, its pretty solid. I will grab a pic of it today.

[pumkin toy]

I got some more done on the rear fenders yesterday, Its coming along pretty good.  I just need to find some good undercoating to spray in there and cover all the steel.  Do any of you guys have experience with undercoatings? Which ones work well and dont cost too much?  Also the first pic is how I had to modify my u-bolt plate to work now that my axle is moved so far back! I had to cut a new hole for the center pin and weld the old one shut.

[pumkin toy]

more

[pumkin toy]

here are some up to date pics of the whole truck. Figured I would take a few now that I have the front stinger and grill on.

[THK Matt]

ABSOLUTELY SOUPED DUDE! Stellar work.

[88_Pathy]

Damn... Envy!!!

[pumkin toy]

ABSOLUTELY SOUPED DUDE! Stellar work.

so what does souped mean?? lol

[84t0y]

so what does souped mean?? lol

i was confused also lol.

great build i really like how low it is and still full bodied,mostly.

[Jud]

Looks good man. I'm sure you have plans for this already but are you gonna add more to the front bumper? Just looks kinda unfinished...

[yota_krawler]

i agree, needs more to it. But i really like it. why the mesh tho? whats next on the list?

[89sastoyo]

for not liking sheet metal you do a pretty damn good job the tubbed rear looks way legit dude

[twistedtoy92]

Oh hell yeah it all works great!!!! But I could use a new switch for my 85, I was having to use a jumper wire Just let me know what all you got!