Author Topic: Project BoostedRunner, SOLD (Read 532672 times)

THK Matt · « **Reply #960 on:** Feb 28, 2010, 11:57:42 AM »

Oh

....

TheCookieMonster · « **Reply #961 on:** Feb 28, 2010, 12:37:37 PM »

sick dude. looks a lot better with that body lift off. i think it gonna look really good all bobbed up and narrowed. keep the pics coming $Beer Chug\'n$

peacesells · « **Reply #962 on:** Feb 28, 2010, 05:19:41 PM »

Damn!!!!!!!!!!!

NITE KRAWLERS · « **Reply #963 on:** Feb 28, 2010, 06:18:57 PM »

Ya we got all crazy n tore it up. The bob cuts turned out super trick. Gona be nice to mate back up and weld. I would think ya got that cross member cut out and the bob tacked back together today. Did ya get the gas tank cut and dropped in maen?

Its gona be a gnarly ride my friend at da classic bra!! I'll probly get that hoist tomorrow after work and drop it off!! Don't stop, keep rolling, n holla I'll zip over dude. Oh and holla when its time to cut da top!!! Photo ooooopppppppsssssssss.

ya wat

dk98 · « **Reply #964 on:** Feb 28, 2010, 06:19:19 PM »

so far so good the bob looks great

NITE KRAWLERS · « **Reply #965 on:** Feb 28, 2010, 06:22:09 PM »

wooooo scary avator thingie dude. HA HA

pumkin toy · « **Reply #966 on:** Feb 28, 2010, 06:39:51 PM »

thanks for the comments dudes! its coming along good. I didnt make as much progress today as i wanted. Woke up with a bad headache and it pretty much ruined most of my day, didnt start workin on it until four. I did get the ugly rear x member cut out (the one that holds the spare tire) i did a bunch of grinding on the frame and got rid of old mounts and other garbage. Plan for tomorrow night is to get the new rear x-member put it with a reciever tube welded in, and get the back of the bed tacked on.

Hey Douglas that would be sweet if we can get that engine hoist over to my place tomorrow! If not its cool, cuz i probly wont work on it tuesday or wednesday.

NITE KRAWLERS · « **Reply #967 on:** Feb 28, 2010, 08:11:47 PM »

IGHT bra!

twistedtoy92 · « **Reply #968 on:** Mar 01, 2010, 02:29:17 PM »

hell yeah!!!! lookin good! $Beer Chug\'n$

axled89 · « **Reply #969 on:** Mar 01, 2010, 03:17:13 PM »

glad to see there wasn't to much fab work there. LOL!! lookin geat so far. waitin to see it finished.

pumkin toy · « **Reply #970 on:** Mar 01, 2010, 11:12:42 PM »

Quote from: twistedtoy92 on Mar 01, 2010, 02:29:17 PM

hell yeah!!!! lookin good! $Beer Chug\'n$

thanks dude!

Quote from: axled89 on Mar 01, 2010, 03:17:13 PM

glad to see there wasn't to much fab work there. LOL!! lookin geat so far. waitin to see it finished.

ha ha there is a crap load of fab work going into it now!

So today at work i mad a new rear x-member with a reciever tube welded into it. Got home and cut the old crappy x-member that holds the spare out. Then cleaned up the frame real well, welded about 15 of the ugly factory holes shut and sanded them smooth so the frame looks nice and pretty. Once the new member was all installed i sanded all the paint off the areas where the body is going back together for the bob and i got the rear section all tacked in place. onto the pics

pumkin toy · « **Reply #971 on:** Mar 01, 2010, 11:18:00 PM »

I still need to make some caps to weld on to the end of the frame to cap it all off

pumkin toy · « **Reply #972 on:** Mar 01, 2010, 11:19:16 PM »

couple more

twistedtoy92 · « **Reply #973 on:** Mar 02, 2010, 02:54:49 PM »

im jealous.... my runner is down again.... clutch exploded and the engine is smokin like a damn chimney.....

THK Matt · « **Reply #974 on:** Mar 02, 2010, 04:17:56 PM »

That thing is lookin dope caleb!

Travis H · « **Reply #975 on:** Mar 02, 2010, 04:22:32 PM »

damn this thing is badass. good work.

pumkin toy · « **Reply #976 on:** Mar 02, 2010, 09:08:23 PM »

Quote from: twistedtoy92 on Mar 02, 2010, 02:54:49 PM

im jealous.... my runner is down again.... clutch exploded and the engine is smokin like a damn chimney.....

ah thats no good man! you need to get that new engine built!

Quote from: THK90 on Mar 02, 2010, 04:17:56 PM

That thing is lookin dope caleb!

Quote from: 84t0y on Mar 02, 2010, 04:22:32 PM

damn this thing is badass. good work.

thanks dudes!

Well i went out to Twisted Customs today to buy some tabs and bushings to build me new motor mounts, while i was out there the guy i got my spare from showed up so i was able to bring home my spare tire today! The owner of Twisted Customs knew of a guy that had one brand new never been used 40x13.50x17 MTR. I told him i wanted it and he sold it to me for 100 bucks!!

Perfect match 40" spare for 100 bucks is an amazing deal, i'm super stoked about that! My 86 mr2 is the only thing i have to drive so i had to stuff the spare in the trunk

I also got the engine hoist all hooked up and ready to remove the old motor mounts, I will work on that thursday.

Rocksnail · « **Reply #977 on:** Mar 02, 2010, 09:34:34 PM »

Awsome build. You do very nice work. One of my favorite runners ! keep up the good work

YOTA yota · « **Reply #978 on:** Mar 02, 2010, 09:43:27 PM »

This thing is so sick. I like how you cut your fenders. And the 40's look so good on there!

pumkin toy · « **Reply #979 on:** Mar 02, 2010, 10:08:51 PM »

Quote from: Rocksnail on Mar 02, 2010, 09:34:34 PM

Awsome build. You do very nice work. One of my favorite runners ! keep up the good work

thanks man! i plan on keepin up the good work, ha ha

Quote from: YOTA yota on Mar 02, 2010, 09:43:27 PM

This thing is so sick. I like how you cut your fenders. And the 40's look so good on there!

thank you! yeah i like how the fenders turned out, but now that i took the body lift out i need to cut most of the factory sheetmetal out of the rear fenders and re-tub it up so the tires wont rub. I have been checkin ut your build too, i like it, nice and simple!

axled89 · « **Reply #980 on:** Mar 02, 2010, 10:24:40 PM »

dude is that the right size spare for that car.

jabhb · « **Reply #981 on:** Mar 03, 2010, 08:29:57 AM »

I HATE YOU ....

aha

pumkin toy · « **Reply #982 on:** Mar 03, 2010, 04:33:58 PM »

Quote from: axled89 on Mar 02, 2010, 10:24:40 PM

dude is that the right size spare for that car.

i can trim the fenders a bit ha ha!

Quote from: jabhb on Mar 03, 2010, 08:29:57 AM

I HATE YOU ....

aha

oh come on man... dont be like that, i will let you drive it this summer!

axled89 · « **Reply #983 on:** Mar 03, 2010, 04:43:20 PM »

Jakesteads · « **Reply #984 on:** Mar 05, 2010, 07:07:33 AM »

i can't wait to see your top... maybe next winter ill bob mine...

take pics of you bobing the top!!!!!! ive only seen a hand full of info on doing it and making it look good

pumkin toy · « **Reply #985 on:** Mar 05, 2010, 03:48:29 PM »

Quote from: Jakesteads on Mar 05, 2010, 07:07:33 AM

i can't wait to see your top... maybe next winter ill bob mine...

take pics of you bobing the top!!!!!! ive only seen a hand full of info on doing it and making it look good

well sorry to let you down bro, I'm not really bobbing my top. I wont be using my tailgate or a rear window. I'm just gonna cut the top off right behind the sliding window's, and then make a small canvas top that will snap on to that and down to the rear of the body

Jakesteads · « **Reply #986 on:** Mar 05, 2010, 05:10:48 PM »

Whatttttttttttttttttt

pumkin toy · « **Reply #987 on:** Mar 05, 2010, 07:58:57 PM »

Quote from: Jakesteads on Mar 05, 2010, 05:10:48 PM

Whatttttttttttttttttt

ha ha sorry dude! I dont like the look of the bobbed tops. I dont want that much body stickin up when I do have the top on. It will be off most of the time though.

I got my custom motor mounts all done tonight

pretty stoked to have that project done. the engine now sits 1.5" lower than it used to, and I still have plenty of clearance between the oil pan and axle housing, and I can close the hood now

I will try to get some pics posted later.

jabhb · « **Reply #988 on:** Mar 05, 2010, 09:20:44 PM »

hell yeah man that s awesome ! and um YES i do wanna drive it! ahahah dude youre getting so much work done to that thing its insane!!!!!!!!!!!!!!!!!!! god i love it...

pumkin toy · « **Reply #989 on:** Mar 05, 2010, 09:49:51 PM »

Quote from: jabhb on Mar 05, 2010, 09:20:44 PM

hell yeah man that s awesome ! and um YES i do wanna drive it! ahahah dude youre getting so much work done to that thing its insane!!!!!!!!!!!!!!!!!!! god i love it...

Alright dude, I will let you drive it! I'm serious! Yeah i've been tryin to keep a good steady move on it and get stuff rebuilt the way I like it.

here are some pics of the mounts... I cut all the old brackets and garbage off the frame and tossed the stock mounts, one was torn and the other was soon to follow! I used the stock brackets that bolt to the block as my base to start building the mounts from. I tacked my tabs to those, bolted in the mount and bolted it to the block. Then I welded in a reinforcement plate on the frame and cut a tube to fit from the plate to the bushing sleeve. Welded it up and good to go!

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

Related Topics