Author Topic: Project BoostedRunner, SOLD (Read 532650 times)

pumkin toy · « **Reply #1110 on:** Apr 07, 2010, 03:57:53 PM »

yeah i ws stoked to find it!

Jordan7118 · « **Reply #1111 on:** Apr 08, 2010, 11:51:42 PM »

If I had a penny for every time the word "brah", "bro", "dude", "man", "stoked", "pumped", "awesome" were found in your thread, I would probably be a millionaire

All joking aside, the progress is lookin' good. I wonder what it's like to drive a first gen runner with enough power to get out of it's own way

<sigh> Back to the 22RE...

John Doe · « **Reply #1112 on:** Apr 09, 2010, 05:10:29 AM »

Quote from: Jordan7118 on Apr 08, 2010, 11:51:42 PM

All joking aside, the progress is lookin' good. I wonder what it's like to drive a first gen runner with enough power to get out of it's own way

<sigh> Back to the 22RE...

I feel your pain Jordan

Wermz84 · « **Reply #1113 on:** Apr 09, 2010, 09:23:38 AM »

Nice looking work on the fenders.

pumkin toy · « **Reply #1114 on:** Apr 09, 2010, 12:34:03 PM »

Quote from: Jordan7118 on Apr 08, 2010, 11:51:42 PM

If I had a penny for every time the word "brah", "bro", "dude", "man", "stoked", "pumped", "awesome" were found in your thread, I would probably be a millionaire

All joking aside, the progress is lookin' good. I wonder what it's like to drive a first gen runner with enough power to get out of it's own way

<sigh> Back to the 22RE...

ha ha all of us toyota guys are bro's around here!
thanks man, yeah its nice to be able to push 40's with 4:88 gears and still be able to accelerate in fifth gear on the highway

Quote from: Wermz84 on Apr 09, 2010, 09:23:38 AM

Nice looking work on the fenders.

thanks BRO! ha ha

pumkin toy · « **Reply #1115 on:** Apr 09, 2010, 12:34:53 PM »

Today I'm working on moving the rear axle back another inch, then I am going to hopefully get the rear fenders completely done this weekend too.

pumkin toy · « **Reply #1116 on:** Apr 09, 2010, 09:28:28 PM »

I finished moving the axle back. Then I went over my welds and other areas that were not completely welded with some seamsealer

swapped89 · « **Reply #1117 on:** Apr 09, 2010, 09:50:19 PM »

fender tubbin looks good

whats yer wheel base at now? did you just drill another hole in yer perches?

EDIT: From the inside it almost looks like its tubbed for some racing slicks.

pumkin toy · « **Reply #1118 on:** Apr 09, 2010, 09:55:50 PM »

Quote from: swapped89 on Apr 09, 2010, 09:50:19 PM

fender tubbin looks good whats yer wheel base at now? did you just drill another hole in yer perches?

looks like my wheelbase is about 110" now. I drilled another hole in the perches. I also had a relocater plate in there before that moved it back an inch. So now my center pin is basically not even on the spring perch anymore. The centerpin is in the hole in the relocater plate, which is welded to the perch!

mayberry · « **Reply #1119 on:** Apr 09, 2010, 10:06:00 PM »

i like the wells also i want to do simmilar but i want to follow the shape of the fender and go more square

pumkin toy · « **Reply #1120 on:** Apr 09, 2010, 10:07:21 PM »

Quote from: mayberry on Apr 09, 2010, 10:06:00 PM

i like the wells also i want to do simmilar but i want to follow the shape of the fender and go more square

thanks, yeah for some reason I like the look of the rounded rear fenders better.

mayberry · « **Reply #1121 on:** Apr 09, 2010, 10:09:17 PM »

for sure i do like when the tire tucks just perfect

pumkin toy · « **Reply #1122 on:** Apr 09, 2010, 10:13:16 PM »

thats pretty much what happens! it tucks up in there all close, but doesnt rub anything

mayberry · « **Reply #1123 on:** Apr 09, 2010, 10:14:18 PM »

cool cool

Skim · « **Reply #1124 on:** Apr 09, 2010, 11:16:00 PM »

What kind of springs are those front and rear ?

That looks killer on 4Ds.

twistedtoy92 · « **Reply #1125 on:** Apr 09, 2010, 11:21:06 PM »

damn that things lookin good...

My girly and I scored a CLEAN 88 runner with 166xxx miles on it;SR5, v6/5spd, COLD R12 A/C, cruise, power windows, power mirrors, tilt wheel, rear defrost, factory toyota tape deck, and it had the ORIGINAL plugs, wires, cap and rotor! Oh and did I mention sunroof? I'll have to post up a build on it $Beer Chug\'n$ cant wait till I get my engine all done in the 85.... $I\'m Down$

THK Matt · « **Reply #1126 on:** Apr 10, 2010, 01:16:40 AM »

thats sick lookin Caleb!

swapped89 · « **Reply #1127 on:** Apr 10, 2010, 02:47:53 AM »

Quote from: pumkin toy on Apr 09, 2010, 09:55:50 PM

looks like my wheelbase is about 110" now. I drilled another hole in the perches. I also had a relocater plate in there before that moved it back an inch. So now my center pin is basically not even on the spring perch anymore. The centerpin is in the hole in the relocater plate, which is welded to the perch!

Nice I have drilled my front perches, I was thinking about adding a relocator plate also. (only if i ever get 39.5s or somethin) seems kinda sketchy though for my DD up front. Might try it when i get a tow rig and trailer.

pumkin toy · « **Reply #1128 on:** Apr 10, 2010, 09:12:36 AM »

Quote from: Skim on Apr 09, 2010, 11:16:00 PM

What kind of springs are those front and rear ?

That looks killer on 4Ds.

front pack is an All-Pro "extra length" main leaf with waggy leaves. rear are extended length Alcans, and thanks dude!

Quote from: twistedtoy92 on Apr 09, 2010, 11:21:06 PM

damn that things lookin good... My girly and I scored a CLEAN 88 runner with 166xxx miles on it;SR5, v6/5spd, COLD R12 A/C, cruise, power windows, power mirrors, tilt wheel, rear defrost, factory toyota tape deck, and it had the ORIGINAL plugs, wires, cap and rotor! Oh and did I mention sunroof? I'll have to post up a build on it $Beer Chug\'n$ cant wait till I get my engine all done in the 85.... $I\'m Down$

sounds like a sweet ride! I would love to have another stock deluxe model like mine as a DD. Does your rear window and everything related work well? JW because I have all the switches and relay's and stuff off of mine that I am selling. All my rear window stuff worked perfect if you need anything. Yeah post it up in the rig gallery man!

Quote from: THK90 on Apr 10, 2010, 01:16:40 AM

thats sick lookin Caleb!

thanks dude!

Quote from: swapped89 on Apr 10, 2010, 02:47:53 AM

Nice I have drilled my front perches, I was thinking about adding a relocator plate also. (only if i ever get 39.5s or somethin) seems kinda sketchy though for my DD up front. Might try it when i get a tow rig and trailer.

yeah that could be kinda scetchy up front man! I think mine should be pretty solid in the rear since I welded the relocater plate to the stock perch. Basically its like an extended perch, its pretty solid. I will grab a pic of it today.

pumkin toy · « **Reply #1129 on:** Apr 11, 2010, 08:18:39 AM »

I got some more done on the rear fenders yesterday, Its coming along pretty good. I just need to find some good undercoating to spray in there and cover all the steel. Do any of you guys have experience with undercoatings? Which ones work well and dont cost too much? Also the first pic is how I had to modify my u-bolt plate to work now that my axle is moved so far back! I had to cut a new hole for the center pin and weld the old one shut.