A New Whatever - MCR14 Break in.

[Wermz84]

Made some Sweet progress today!   8)







Of course now that I installed the spark plug wiring loom, I see that it will interfere with the stock air intake.  Something will have to be modified.    Tired of the wires setting on my header.


And it really hurt somewhere deep inside to put a dirty carb on such a clean engine.  But I know that this carb works great.

[*** YELLER ***]

 

[fordh8r]

Lookin Damn Sweet! 

I can't to see how it will look when it's in the truck at MCR.    ...

[THK Matt]

hey wermzy, can you install the red wire loom pieces on the underside of the metal bracket?

that engine looks really nice.

[Wermz84]

Thanks for the compliments guys, I appreciate it. 

I can't to see how it will look when it's in the truck at MCR.    ...

Neither can I!!   

hey wermzy, can you install the red wire loom pieces on the underside of the metal bracket?

that engine looks really nice.

They could be mounted to the underside but the base of the loom is still in the way of the intake extension piece, which really doesn't do anything on mine anyway.




  Hopefully this will be OK.  I cant think of anything bad about this except for drawing in hot air over the header. 




On another note, I really hate the decisions that Toyota make sometimes.  I just need a bearing for the power steering belt idler pulley.  they make you buy the whole damn assembly including pulley, bracket, and adj nut for a meer $160.   I just need the BEARING you bastards.  of which none of my local parts stores can seem to find it anywhere.

NSK 6204v   how hard can this be. 

[Wermz84]

Your too Kind buddy!   

[Duffil]

jackass...it's a 6204-2RSJ bearing...go to the parts place.

[Wermz84]

jackass...it's a 6204-2RSJ bearing...go to the parts place.

Well they have a funny way of writing it.  because it says right on it 6204v, and it was in my hand for the parts guy.

I will try your number tomorrow. 

[*** YELLER ***]

jackass...it's a 6204-2RSJ bearing...go to the parts place.

THE RAIN MAN HAS SPOKEN   

[Duffil]

sorry guys but any non-cranial/rectally inverted parts guy should know what the numbers on the bearing mean.

[fordh8r]

sorry guys but any non-cranial/rectally inverted parts guy should know what the numbers on the bearing mean.

I bought one for like 12 bucks not all too long ago...


160 bucks, my  .... 

[GJToyotabug]

hey just finished reading lovin the motor wanna trade I can trade you for my up coming project an 84 that needs well what you started with ORRRR the 22RE in my truck  nahh but i do like the looks of it

[Wermz84]

F#$% its been a month since i touched this.   Been a bad month for Wermy.


So I'm trying the LCE Street engine mounts.  I got the first set of the softer durometer, around 62.  We'll see how they hold up.


Finally got the engine in last Sunday.  and i must say i had some very cute help. 





Time to connect some more stuff and get ready to fire this pregnant dog up. 

[*** YELLER ***]

F#$% its been a month since i touched this.   Been a bad month for Wermy.

Finally got the engine in last Sunday.  and i must say i had some very cute help. 

Um i dont see any   CUTE HELP    :bull crap:





on a side note  looks good bro  hopefuly I can post up some simular pics. tomorrow of DA RUNNER 

[Wermz84]

You better.   


We'll see how things go with the new help before i put any pics up.

[unclejpl4x4]

wow that's pretty   i was gonna congratulate U till you put the   air clean on

[Wermz84]

wow that's pretty   i was gonna congratulate U till you put the   air clean on

    I know.  I hate it.  it has to go.     Not sure what to do there though. 

[John Doe]

Simple, go with the weber you should have.

Good luck on that cute help.

[Duffil]

Lookin good! glad you finally got some time in on her...uhm..i mean IT.

[MiniSimp]

Dude! Your "cute help" is my ex girlfriend!!!!!!!!!!!!!!!!!!!!
Although she didn't have red hair at the time....











j/k! She is cute though!

[Wermz84]

           

[Duffil]

F#$% its been a month since i touched this.   Been a bad month for Wermy.
Finally got the engine in last Sunday.  and i must say i had some very cute help. 

pics or it didn't happen.
[worknazi] What have you accomplished this weekend?[/worknazi]

also wondering what happened at the parts store. I see your PS tensioner is on the engine.

[Wermz84]

pics or it didn't happen.
[worknazi] What have you accomplished this weekend?[/worknazi]

also wondering what happened at the parts store. I see your PS tensioner is on the engine.

Perhaps in time Grasshopper with the pics. 

This weekend went totally sideways.      cant go in to detail here.

I tried napa again, gave them the bearing, rummaged through the computer and ultimatly he said no dice (10 minutes totall).  So I hand him the part number you gave me, he looks at computer screen, Perplexed look, walks in back, walks out hands me bearing.  (10 seconds totall)      thanks for that number.   

[John Doe]

I tried napa again, gave them the bearing, rummaged through the computer and ultimatly he said no dice (10 minutes totall).  So I hand him the part number you gave me, he looks at computer screen, Perplexed look, walks in back, walks out hands me bearing.  (10 seconds totall)      thanks for that number.  

Moral of the story: hand the guy the part # and save yous self the time.

[Wermz84]

Moral of the story: hand the guy the part # and save yous self the time.

Your absolutly right.  But I was doing it as an experiment. 

[John Doe]

good excuse

[Wermz84]

IT LIVES!!!!

[Duffil]

[John Doe]

Prove it!

[Wermz84]

Thanks!!!    I'm so Stoked!                 


Soon I'll be -->



FIRED right up.
Burnished it in for 25min at 16-1800 rpm.

gonna go and drain the oil and change the filter.    Not sure what type of oil to put in for the next 500 mi.   


trying to up load some vids.