A New Whatever - MCR14 Break in.

Started by Wermz84, May 07, 2007, 10:32:25 PM

0 Members and 1 Guest are viewing this topic.

Wermz84

:suprised:   Funny guys.  but she's just a friend.






Pulled the cover off yesterday to check the valves.  Soo purty, Cam and rockers are looking great at 200mi.




Took it for a little spin throught the mountains yesterday (about 45 mi, longest continuous run yet) and no oil bolt dribble.  :woohoo:    Double checked the mounting bolts.

Replaced the thermostat gasket but it still dribbles out of the cap.  again just enough to mess with me.  I guess time for some RTV I :dunno:  but two toyota thermostat rubber gaskets have done it now.  :headscratch:   Lots of firsts with this engine.  haha.


I like to Drive!

fordh8r


GJToyotabug


Wermz84

I like to Drive!

Duffil

Well you are looking good then. All the leaks sealed up now?

Rocksurfer

The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

Wermz84

Quote from: Duffil on October 29, 2008, 05:52:24 PM
Well you are looking good then. All the leaks sealed up now?

Yup!  Everything is sealed!   Still working on the gauges though.

Quote from: Rocksurfer on October 29, 2008, 06:06:18 PM
Good deal, glad it all worked out.
Thanks I am stoked!
I like to Drive!

unclejpl4x4

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly


Wermz84

I like to Drive!

fordh8r

Quote from: Wermz84 on October 29, 2008, 07:04:33 PM
:acclaim:  I could not have done it without all of you guys!    :yesnod:    :gap:
Sure, you could have. It just wouldn't have taken as long.  :gap:  :rofl:  :haha:

Duffil


BigMike

:psss:
Check out our new Rock Crawling Videos!
2016 56-speed 580:1 Tacoma Rock Crawler   
1981 36-speed 511:1 3RZ-FE Rock Crawler
1987 6-speed Supercharged 4A-GZE MR2
Instagram: @SlowestTacoma
Things are only impossible until they are not.
"The worst of both worlds, the best of neither." -abnormaltoy
"An informed question. But difficult to answer. I am what you see." -Nanaki

unclejpl4x4

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

John Doe

My 85 4Runner build http://board.marlincrawler.com/index.php?topic=46841.0

peacesells: "Its kinda fun tryin to avoid body damage, just like playing operation with different sound effects"

Rocksurfer

The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

*** YELLER ***

MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

fordh8r


FLRunner

I believe someone by the user name MOSK  on 4x4wire make a A Pillar gauge pod      not sure if he still makes them  but worth a try .

Duffil

holy crap. not only are you stepping up to duals but the BM used his :snapshot: magic to tell us about it!

your going to LLLOOOOOOVVVVEEEE them duals homie. 

I assume your old 4.7 gearset is in the rear case or IS that your old case?

*** YELLER ***

Quote from: Duffil on January 09, 2009, 07:30:55 PM
holy crap. not only are you stepping up to duals but the BM used his :snapshot: magic to tell us about it!

your going to LLLOOOOOOVVVVEEEE them duals homie. 

I assume your old 4.7 gearset is in the rear case or IS that your old case?


you sir are correct
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

Duffil


Wermz84

#802
Finally home.

I look so confused in that second pic.  :hahaha:  Today was an absolute blast.  Thanks guys, i have been wanting this setup for a looong time now.  I am stoked.  Finally a real bumper as well.

Budbuilt dual x-member, still in shipping.
I have already spoken to south bay drive line,
I also bought one of these while I was at the shop.
http://www.marlincrawler.com/sites/all/marlin/files/tcasemount4xi640.jpg
Hopefully between the LC engine mounts and that xmember mount my drive train will stay put with the extra torque.  :crossed:   I'll let you'all know.
Still have to buy another twin stick.
cut hole in floor board

all goes well, I'll be at hollister within 2 weeks.  :woohoo:

Yes 4.7's are in the rear.  that thing is ready to rock and roll.  :rockingout:


who was supposed to call you??   :dunno:
Edit:  I did call you, you never called me back.  :down:
I like to Drive!

fordh8r

Oh sweet! You got one up on me with those 4.7's.  :bowdown:  Is that an R10 adapter? Or did I miss that part?  :disturbed:  Well I hope it goes together well for ya (not that it should give you any problems).  :thumbs:

Wermz84

thanks, I love the 4.7's, but it's gonna be so sweet to have my stock low back.

It's the standard MC07.  I thought about rotated for about a hot minute, then decided againsn't it.   8)



I like to Drive!

fordh8r

Quote from: Wermz84 on January 10, 2009, 08:14:58 AM
thanks, I love the 4.7's, but it's gonna be so sweet to have my stock low back.

For sure!  :thumbs:


Quote from: Wermz84 on January 10, 2009, 08:14:58 AM
It's the standard MC07.  I thought about rotated for about a hot minute, then decided againsn't it.   8)

Still SCHWEET!  :yupyup:

Wermz84

Doing a little test fitting today.  :pirate:





This thing is gonna be sweet.  Going to have to do a little clearance work which is to be expected.
the black marks are the sharpie lines i put.  Other side lines up well.



Going to be tricky however clearancing the frame for bolt's 7, and 8.



I love this thing.  [cartman voice] Beef Cake! [/cartman voice]
I like to Drive!

John Doe

My 85 4Runner build http://board.marlincrawler.com/index.php?topic=46841.0

peacesells: "Its kinda fun tryin to avoid body damage, just like playing operation with different sound effects"

Wermz84

Quote from: John Doe on January 10, 2009, 01:36:55 PM
Looks great! Now hurry up and lift it  :biggthumpup:



I just spent everything I had on this.   :hahaha:


Soon though.
I like to Drive!

Jud

Holy :pokinit: I didn't even know that was you in there yesterday. Me and my buddy came in and picked up a tranny and you were gettin directions home. haha I was the red headed kid with the skin shirt on.
One Ton Single Cab  - http://board.marlincrawler.com/index.php?topic=48229

"bout tree fiddy"