A New Whatever - MCR14 Break in.

Started by Wermz84, May 07, 2007, 10:32:25 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 ... 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
User actions

BrotherGrim

#990
June 17, 2009, 08:28:15 AM
Quote from: Wermz84 on June 16, 2009, 04:05:31 PM

I want more specs on your air system.  where please ?
I still think I have the parts list for the OBA system. Any time you want to look at it feel free to come up and take a look. If you go on FOTR work weekend you can see it in action.
Proud member of Cal4Wheel, BRC, UFWDA, FOTR, and SEMA Action Network.
One of the founding members of NorCal4Wheelers.
Custom '89' 4 door truck, 36's, daul cases, ARB F/R, bla...,bla....,bla
'KI6ZFZ'

Wermz84

#991
June 17, 2009, 09:07:04 AM
I just talked to my boss.  I cant get Monday morning off.  So as long as I get home before midnight i'm good.  :)
I like to Drive!

BrotherGrim

#992
June 17, 2009, 09:36:57 AM
We better get home before midnight, I have to drive to Redwood Valley Monday morning. 2.5 hours to work sucks on a Monday morning. :yawn:
Are you taken your truck or are you going to ride pregnant dog with me.
Proud member of Cal4Wheel, BRC, UFWDA, FOTR, and SEMA Action Network.
One of the founding members of NorCal4Wheelers.
Custom '89' 4 door truck, 36's, daul cases, ARB F/R, bla...,bla....,bla
'KI6ZFZ'

Wermz84

#993
June 17, 2009, 09:40:31 AM
I mean to Santa Cruz before midnight.   :gap:

I would just asume ride Biotch right now.  leave my truck at your place.
I like to Drive!

BrotherGrim

#994
June 17, 2009, 09:59:22 AM
No prob. Come up Friday night and leave 0 dark thrity Saturday morning.
Proud member of Cal4Wheel, BRC, UFWDA, FOTR, and SEMA Action Network.
One of the founding members of NorCal4Wheelers.
Custom '89' 4 door truck, 36's, daul cases, ARB F/R, bla...,bla....,bla
'KI6ZFZ'

*** YELLER ***

#995
June 19, 2009, 04:46:41 PM
 :bowdown: :rofl:









:moon: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

Blingn

#996
June 19, 2009, 04:59:15 PM
THAT IS GREAT!!!!! hah a

Wermz84

#997
June 19, 2009, 05:03:12 PM
OMG!!!!!!!!!!!   :rofl::rofl::rofl::rofl::rofl::rofl::rofl::rofl::rofl:
I like to Drive!

*** YELLER ***

#998
June 19, 2009, 06:02:05 PM
 :cheese: :turtlehead:



:dunno:



:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

fordh8r

#999
June 19, 2009, 07:08:44 PM
FUNNAY!  :rofl2: :rofl2: :rofl2: :rofl2: :rofl2: :rofl2: :rofl2: :clap2: :clap2: :clap2:

unclejpl4x4

#1000
June 20, 2009, 09:09:10 AM


i think U should aer brush that on the wermz mobile
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Wermz84

#1001
June 20, 2009, 11:46:26 AM
good idea UNc..  :hahaha:
I like to Drive!

Wermz84

#1002
June 20, 2009, 11:49:40 AM
OK.  So here is my problem.

Directions simply say "remove old cable observing how it is attached and repeat"   My problem is that it has never been attached so I have no clue.

It is supposed to Bolt to the drum, but there is only a counter sunk allen screw (inside red circle),  am i suppose to go buy a big headed allen to attach the cable end?  but wouldn't that potentially mess up the synthetic cable?

:wall:    I wanted to go get stuck today.

I like to Drive!

unclejpl4x4

#1003
June 20, 2009, 12:03:28 PM
may i suggest a round Allen head or torx bolt   
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Wermz84

#1004
June 20, 2009, 12:04:57 PM
Quote from: ÜncleĴ on June 20, 2009, 12:03:28 PM
may i suggest a round Allen head or torx bolt   

Kind of what I was thinking.
I like to Drive!

fordh8r

#1005
June 20, 2009, 12:25:03 PM
Quote from: ÜncleĴ on June 20, 2009, 12:03:28 PM
may i suggest a round Allen head or torx bolt   
AKA Button Head....  Just don't abbreviate the Button part of that term.  :gap:

Wermz84

#1006
June 20, 2009, 12:34:02 PM
Haha!



Looking at that pic, I thing I would start wrapping it to the righ from the bolt?

any thoughts people?
I like to Drive!

jimbo74

#1007
June 20, 2009, 12:39:37 PM
right would make more sense.... i have always heard the first wrap is useless

:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

fordh8r

#1008
June 20, 2009, 12:40:17 PM
Oddly, that bolt isn't along either edge of the drum.  :headscratch: But, wrapping it to the right side first would seem to be ok. The worse that could happen is you end up taking it back off and then wrapping it the other direction if it doesn't sit very well the first way.   :-\  :willynilly:

fordh8r

#1009
June 20, 2009, 12:43:21 PM
Quote from: jimbo74 on June 20, 2009, 12:39:37 PM
right would make more sense.... i have always heard the first wrap is useless


The first "wrap" yes, but not the first "lay" of rope. It's typically required or recommended to have a minimum 3 wraps of rope on the drum for any pull. But the winch has the most pulling power anywhere in the first Lay. Make sense?  :thumbs:

Wermz84

#1010
June 20, 2009, 01:34:40 PM
Quote from: fordh8r on June 20, 2009, 12:43:21 PM
The first "wrap" yes, but not the first "lay" of rope. It's typically required or recommended to have a minimum 3 wraps of rope on the drum for any pull. But the winch has the most pulling power anywhere in the first Lay. Make sense?  :thumbs:
they say 5 wraps is optimum in the directions.


thanks guys.   got my button head, gonna gitrdone.
I like to Drive!

fordh8r

#1011
June 20, 2009, 03:14:43 PM
Quote from: Wermz84 on June 20, 2009, 01:34:40 PM
they say 5 wraps is optimum in the directions.


thanks guys.   got my button head, gonna gitrdone.
There ya go! Their recommendation is different...I wonder if that's for a synthetic line VS. ...say...a steel cable.  :think: hhmmm?

Wermz84

#1012
June 20, 2009, 03:34:00 PM
DONE!! :hyper:


Just need to tidy up the electric cable connections to the battery.  and tie it into the alarm system.

I chose to mid mount the control unit that way I have equal distance no matter what side of the truck i need to be on.  But I'm not sure i like it, sticks up kinda high.










Tonight I go to a parking lot and pull my truck to set the cable.  :woohoo:

I like to Drive!

fordh8r

#1013
June 20, 2009, 03:40:21 PM
Haha, no more hole in the middle.

Transformed from this --->  :gap:  to this----->   :greengrin:

Wermz84

#1014
June 20, 2009, 03:40:42 PM
:rofl:


Funnay!!
I like to Drive!

unclejpl4x4

#1015
June 20, 2009, 03:48:16 PM
looks sweet  :clap2:   now go winch a wench
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Wermz84

#1016
June 20, 2009, 03:49:29 PM
Quote from: ÜncleĴ on June 20, 2009, 03:48:16 PM
looks sweet  :clap2:   now go winch a wench

:rofl:   I will get right on that.  :outtahere:
I like to Drive!

fordh8r

#1017
June 20, 2009, 03:50:58 PM
Quote from: Wermz84 on June 20, 2009, 03:49:29 PM
:rofl:   I will get right on that.  :outtahere:
Get right on...which? the winch or....the wench?  :disturbed:

4RunnerChevy

#1018
June 20, 2009, 03:51:11 PM Last Edit: June 20, 2009, 07:30:58 PM by 4runnerchevy
Sweet, take a day off and get stuck next Thursday or Friday.   :clap:

Edited:
Thursday=Hollister

BrotherGrim

#1019
June 20, 2009, 05:21:52 PM
Looks nice. By the way who did those nice welds on that bumper. :clap:
Proud member of Cal4Wheel, BRC, UFWDA, FOTR, and SEMA Action Network.
One of the founding members of NorCal4Wheelers.
Custom '89' 4 door truck, 36's, daul cases, ARB F/R, bla...,bla....,bla
'KI6ZFZ'
Print
Go Up Pages 1 ... 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
User actions