Author Topic: A New Whatever - MCR14 Break in. (Read 190502 times)

Wermz84 · « **Reply #1230 on:** Sep 14, 2015, 09:39:57 PM »

Quote from: redneckcustoms13 on Sep 14, 2015, 08:19:03 AM

I wheeled my 80 in bone stock form other than welded rear and 4.7 case for about 2 years after getting out of my built samurai. I will say some of the best wheeling I've enjoyed was in that stock 1st gen. I dig how yours is built now though for sure.

Thanks.

Wermz84 · « **Reply #1231 on:** Sep 14, 2015, 09:57:48 PM »

OK. Here are a few pics from Prairie City yesterday. Again, I am very pleased with how it has turned out so far.

So far very stable, The MTR's are smooth on the highway and I was impressed with how much they hooked up on the rocks. Cannot wait to hit the trail.

still a bunch of little stuff to do. Oh, and yeah, i'm even slower now on the highway.

I love this photo! The most caddywhompus my rig has ever been.

Found my new drive line and u-joint. lol

Some droop in the distance.

After all these years I'm just not use to seeing light come through under my rig.

I really like this one.

I love how unnatural the truck looks here.

1985CRAWLER · « **Reply #1232 on:** Sep 14, 2015, 10:43:11 PM »

damn that truck looks good! the MTRS with those allied's are what does it !

why no pics on the big pipe course?

that section is always fun!

WaffleLux · « **Reply #1233 on:** Sep 15, 2015, 12:37:23 AM »

Nice rig! MTRs rock on that rig!

ssicoffroadshop · « **Reply #1234 on:** Sep 15, 2015, 06:02:40 AM »

Ok, so, you did a little mall crawling. Not a single tire off of the ground in any pic, I thought you said you would test it and stretch it out. We managed to get a flying tire in my dirt pile but none at PC. I was hoping you would drive it like you stole it out there. The 35's make all of that stuff Childsplay now. I guess soup bowl will be on the agenda for this weeks run into the Rubicon

ssicoffroadshop · « **Reply #1235 on:** Sep 15, 2015, 06:06:20 AM »

Quote from: 1985CRAWLER on Sep 14, 2015, 10:43:11 PM

damn that truck looks good! the MTRS with those allied's are what does it !

why no pics on the big pipe course?

that section is always fun!

With the allieds and the mtrs well plus the PSC we have started calling him "Jeep money". I'm just jealous is the real fact but, hey feel free to help the new name stick

BigMike · « **Reply #1236 on:** Sep 15, 2015, 09:13:08 AM »

Two tone paint is just AMAZING.

fordh8r · « **Reply #1237 on:** Sep 15, 2015, 10:12:06 AM »

Quote from: BigMike on Sep 15, 2015, 09:13:08 AM

Two tone paint is just AMAZING.

isn't it though? We be in the 2 Tone Club.

redneckcustoms13 · « **Reply #1238 on:** Sep 15, 2015, 10:41:41 AM »

Good shots, very nice rig.

Wermz84 · « **Reply #1239 on:** Sep 15, 2015, 01:25:06 PM »

Quote from: 1985CRAWLER on Sep 14, 2015, 10:43:11 PM

damn that truck looks good! the MTRS with those allied's are what does it !

why no pics on the big pipe course?

that section is always fun!

Thanks. Big pipe course will be next time I'm out. We were time constraint yesterday.

Quote from: ssicoffroadshop on Sep 15, 2015, 06:02:40 AM

Ok, so, you did a little mall crawling. Not a single tire off of the ground in any pic, I thought you said you would test it and stretch it out. We managed to get a flying tire in my dirt pile but none at PC. I was hoping you would drive it like you stole it out there. The 35's make all of that stuff Childsplay now. I guess soup bowl will be on the agenda for this weeks run into the Rubicon

LOL. I was actually trying to get a tire in the air. I was aiming at high and low spots to see if I could get anything off the ground. I was surprised I didn't as I know there are way more flexy and articulated setups out there.

Quote from: ssicoffroadshop on Sep 15, 2015, 06:06:20 AM

With the allieds and the mtrs well plus the PSC we have started calling him "Jeep money". I'm just jealous is the real fact but, hey feel free to help the new name stick

You just had to let that nick name out...

That is ok, I'm jealous of Snap on money. hahaha.

Quote from: BigMike on Sep 15, 2015, 09:13:08 AM

Two tone paint is just AMAZING.

Thanks.. $Beer Chug\'n$ I use to want to paint it. But now if i ever do I will repaint it the stock two tone colors.

Dingman. · « **Reply #1240 on:** Sep 15, 2015, 03:52:29 PM »

Hey Jeep money! Like how the truck looks!

Wermz84 · « **Reply #1241 on:** Sep 15, 2015, 04:13:42 PM »

Quote from: Dingman. on Sep 15, 2015, 03:52:29 PM

Hey Jeep money! Like how the truck looks!

Thanks!

*** YELLER *** · « **Reply #1242 on:** Sep 22, 2015, 05:34:05 PM »

where are the Rubicon Pics

HogCanyonHopper · « **Reply #1243 on:** Sep 22, 2015, 06:31:06 PM »

It was great to see you out there Thad. wish I could have seen your rig in action with all the new stuff. It looks awesome. Crystal takes some xlnt pics!!

Wermz84 · « **Reply #1244 on:** Sep 22, 2015, 09:36:21 PM »

Quote from: *** YELLER *** on Sep 22, 2015, 05:34:05 PM

where are the Rubicon Pics

I cannot rush her.

Honestly we didn't take many pics with all the problems I was having.

Quote from: HogCanyonHopper on Sep 22, 2015, 06:31:06 PM

It was great to see you out there Thad. wish I could have seen your rig in action with all the new stuff. It looks awesome. Crystal takes some xlnt pics!!

You to Joe. Maybe one day we can get some wheeling in. $Beer Chug\'n$

Hope you and the son had a great time.

brockbuilt85 · « **Reply #1245 on:** Sep 28, 2015, 10:04:43 AM »

Noice!

bigarms23 · « **Reply #1246 on:** Sep 30, 2015, 07:18:30 PM »

very nice

Dwill817 · « **Reply #1247 on:** Nov 06, 2015, 04:55:59 AM »

Quote from: Wermz84 on Sep 08, 2015, 07:38:04 PM

Without further ado, as she sits now.

First, I had a lot of help that I am grateful for. Thank you (SSIC OFFROAD and John Doe)

Second, I am very pleased with how it turned out. It is a little taller than I planned on but that is ok, as it will settle some.

Up next. Photos in some rocks!!

What's your frame height under the door on the flat portion? And a diameter or your tires at "X" PSI? Just wanna see what height your at..

RATCATCHER38 · « **Reply #1248 on:** Nov 10, 2015, 02:39:36 PM »

Nice rig mate! Looks great with the beadlocked alloys. I like the way your build progressed. I just read through the whole thing. You must be pretty proud of how it has all turned out.

LN65 HiLux

Dingman. · « **Reply #1249 on:** May 22, 2018, 08:01:28 PM »

Man it has been way too long... where’s the updates?

Pat · « **Reply #1250 on:** Jun 26, 2018, 06:47:04 PM »

Just strolling through build as I am getting back into Toyotas after many years:) I remember seeing this rig at a round up many years ago on 31's if I remember correct? Need to read through the whole thread

Wermz84 [OP]

Wermz84 [OP]

Wermz84 [OP]

Wermz84 [OP]

Related Topics