$300

[shawnb]

I just created two more disk for you to set your sights with.

[Thumper]

Good lookin truck white and good looking lil hunter you got there shawn.
Keep the mods comeing this is like smokein pot its gettin addictive. lol
Adam

[brainlessfool]

man, just seeing the  work WT does on his truck gives me a buzzzzz :beerchug:firer up a fattie Thumper

[WHITE_TRASH]

Well its finally out of the shop ...for now.  I still need to finish the floor and fix the terrible pinion angle!!  The crossmember isnt as solid as I want it to be so Ill reengineer it this week.  

[WHITE_TRASH]

Like I said the pinion angle is complete crap!  The angle at the t-case is actually worse if Im still in gear and I let off the gas you can hear the joint making contact  

[WHITE_TRASH]

This pic kinda sucks but you get the idea on the clearance Ive gained.

[brainlessfool]

hope you by-passed your brake load valve. mite as well!

[WHITE_TRASH]

I have been eyeballing that for a while now.  I just have lacked the motivation after doing all the rest of this project.  It would be smart to take it off cause it leaks!
WT

[BigMike]

The color is actually called flouresent red, it looks orange in the pics and in real life but if you compare it to the flouresent orange its deffinately red. 8) 8)too damned bright I love it! 8) 8)

That's just what you need..... You know the #1 color that attracts cops (or at least stands out the most) is Red and now you've gone and painted it flouresent red. Cop magnet!!

When the cops come just burn 'em

[WHITE_TRASH]

You aint seen nothin yet I welt to wally world last night and got the rest of the paint for it... trust me you have not seen ANYTHING like it!
WT

[Installer_Joe]

This pic kinda sucks but you get the idea on the clearance Ive gained.

In that picture it looks like your missing a shifterboot. i have extra if you need

[WHITE_TRASH]

Thanx for the offer I really appreciate it    But I cut the origional boot in half to use it for the rear case.  I have a boot set for the forward shift & W56 for the front two.  I just need to finish the floor.  I used sheet metal that basically amounts to 1/8th plate.  It is too heavy and almost immposible to bend here at my shop.  I am replacing the whole tunnel with 22 gauge that shawnb donated to the cause.  Thanx shawn!
WT

[WHITE_TRASH]

I finally had time to work on my own junk tonight!  I pulled the bed off, chucked the lspv, pulled the tank for relocation to the rear and designed my rear shackle hanger and bumper.  I will get the new springs tomorrow for it.  Damn I cant wait
WT

[83yota]

damn thats alot of pages. nice truck. in the last 3 days i have put more into my engine than you have in your entire truck and i am only running 31's at stock height . oh well i hope you get there. looks good keep it going.

[WHITE_TRASH]

lol I know exactly what you mean!  I paid more for the tires on my 84 than I have invested in this whole thing!  Just for those keeping track again:  The Mco7 and all related hardware that I have put in it lately put me just over a grand actually $1054 to be pretty exact.
WT

[83yota]

so dose that meen your done? or i guess you could find something to sell off the beast

[WHITE_TRASH]

Oh come on you should know better than that!  Im never done I have so much to do I cant find all the motivation I need right now.  Funny but I work better and get more done when Im under the gun.  Ill probobly still be tweaking the truck in the parkinglot of the event in june!
WT

[WHITE_TRASH]

Ive got the rear springs, u-bolts and plates.  Need to make new shock mounts and mount the tank.  It still a ways off but what do yall think will be involved with swapping out to a 90 x-cab body?  I already have a running list in my cranium but Im sure that Ive missed some things... Any thoughts would be greatly appreciated.
WT

[WHITE_TRASH]

My list just got WAY bigger!  I was out working on the lil truck, the frame is pretty bent   Looks like Im just gonna put all the running rear on the 90 and run with it.  Any thought on what to do about the shifter for the auto that is in the 90?  Ive never seen one on the column like this, Im sure its factory I just hadent seen one before.  Well back to the shop Ive got a LOT of stuff to do now......
WT

[brainlessfool]

well just cut out the tunnel like you did on the little truck and pull the shift lever off and forget it :.order: times a wasting get a move on and make the sparks fly just don't forget the cheesey flames and of coruse don't worry about the looks!

[brainlessfool]

And i geass you got all the stuff to do a SAS on the 90, sould be fun time to start a new thread about how fast a sas can be done

[WHITE_TRASH]

Its amazing how fast you can strip a toyota down to nothing too   A buddy of mine...actually the one that got beaned by the bumper off of the lil truck stopped by and we stripped it down to the very last bolt!  I have ALL the bolts that were origionally on this truck it is nothing now.  Just a frame steering box and axles.
WT

[brainlessfool]

man, thats a good friend! when he's not stoping run-a-way bummers for ya he's helping ya stip down the rig! give him a  for me!

[WHITE_TRASH]

Its amazing he didnt mention it once the whole time he was here either usually it comes up one way or another.  Yep he helped a lot!  It would have been a different story without his help.
WT

[brainlessfool]

well he's a better man than me guga dinn, I'd of ridin your the whole time I was helpin! I mean a flying bumper stoper is not some thing you want to let ppl forget about.
heck give him 2 from me, he's eraned them

[WHITE_TRASH]

Heres a face only a mother could love!  And a side that falls under the same pretext.  Oh yea brainless he also helped me tear the engine and trans out of the new truck and he helped me haul it to the house!  Damned good help!

[WHITE_TRASH]

The passenger side is pretty wasted but its not like it wouldnt be that way soon anyway
This is the shifter I was talking about Ive never seen one like this kinda strange.

[WHITE_TRASH]

Any body want any 81 parts? lol  To say its stripped is a understatement.  There are 5 bolts in the cab period.  The seatbelt bolts were rusted in. 

[shawnb]

damm wt
you've got a lot of work and a little time to get it done. I still want to do some practace runs before the event in june. Nothing hoses ya worse than a spotter and driver misscommunication or lack of experiance working together. You can see that on the goldendale tape that I lent ya.

[yotaboy79]

dood that shifter is messed up, ive never seen somthin like that in any rig ive been in, whered u get that truck??, oh well just lob it of with a cutting off wheel and make a new shifter