0 Members and 46 Guests are viewing this topic.
I would suggest being on the lookout for a used one.
Well the motor is bolted in with the new motor mounts.Looks like my steering stabilizer will have to be moved down to miss the pan.I need to find out what the stock Tacoma alternator puts out as well as if the one off my 22RE can be swapped in it's place. I need to pull it but it looks like maybe just changing the pulley and plug will do the trick. I have a few more parts coming in and I still need to get a clutch pack and resurface the fly wheel before the final install. I guess next is deciding on which way to go with fuel tanks. The 22RE or the Tacoma, after that the exaust will be the opposite side. I have everything from the Tacoma so if it will fit thats the way to go (IMHO). But we will see soon, then it's just a matter of running the rest of the pluming then it on to the electrical
Input shaft is longer on the trans behind the 2tr. So it'd have to a later model trans to match. Gear driven t-case options get hampered, but I'm not sure if anyone offers an adapter for that configuration. Maybe Inchworm?And I'm not sure if anyone's done the later 2.7 yet. Seems to be the main hold up is drive by wire and fabbing to put the whole throttle assembly into the older trucks, but I know some guys have talked about it.
I've got a twin coil 3rz with wiring harness and everything else I need except the ecu. I bought the engine second hand and the guy I bought it from couldn't remember what year it was. I've run part numbers and looked up pictures of sensor pig tails and things to try to identify exactly what I have. Do these motors have a stamp pad or casting number something to tell me exactly what it is so I'll know what ecu to find?
Started by cruzila « 1 2 ... 32 33 » Rig Gallery
Started by yotaboy79 « 1 2 ... 32 33 » Chit Chat Camp
Started by BLACKDOG « 1 2 ... 11 12 » Chit Chat Camp
Started by Willy Mammoth « 1 2 3 4 5 » Chit Chat Camp
Started by Rocksurfer Chit Chat Camp