Author Topic: Making Of The Willy Mammoth  (Read 783671 times)

0 Members and 77 Guests are viewing this topic.

red

  • Offline The 1.5K Club
  • **
  • Turtle Points: 199
  • Male Posts: 1,616
  • Member since Jan '05
  • irish redhead texan, interesting combo
    • View Profile
    • Buy me a beer
Re: Making Of The Willy Mammoth
« Reply #2880 on: Aug 05, 2007, 05:59:14 PM »
Me eaither and  :dunno: I don't have a tack.
the best fuel economy is usually right around the rpm with the most torque with a diesel. most motors thats 1800rpm's. check where you reach maximum torque (probably right around there) and it should let you know what rpm to search for.
read and comment :whip:

USAF EOD tech

Willy Mammoth [OP]

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 0
  • Male Posts: 4,252
  • Member since Nov '04
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2881 on: Aug 05, 2007, 06:09:42 PM »
I do have a tack output on the harness, but don't know if it is a neg signal or what at this point.

So long as it has a rev limiter I shouldn't have to worry about a tack right now. There is still a lot of other stuff to do.
:usa: American by birth, redneck by choice. 

Making Of http://board.marlincrawler.com/index.php?topic=6472.0  
 
Sightings Of  http://board.marlincrawler.com/index.php?topic=10805.0

Lady Di

  • Goddess of Mud
  • Internet Lassies
  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Female Posts: 299
  • Member since Nov '04
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2882 on: Aug 05, 2007, 06:14:46 PM »
See anything wrong with this picture? This was before we went for our drive... and it was at the front diff :yikes:

Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

DTB

  • Shoutbox Moderator
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 2
  • Male Posts: 7,110
  • Member since Nov '05
  • Squirrels and beer don't mix
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2883 on: Aug 05, 2007, 06:15:59 PM »
See anything wrong with this picture?


bad flux capicator? :headscratch:
RIP KYOTA
Quote
toyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

Lady Di

  • Goddess of Mud
  • Internet Lassies
  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Female Posts: 299
  • Member since Nov '04
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2884 on: Aug 05, 2007, 06:17:56 PM »
On our way back from Mark's parents place we took a shortcut... and we've been getting a lot of rain.
Mark got the oiled drained out to tear down the tranny and transfer case.
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

Lady Di

  • Goddess of Mud
  • Internet Lassies
  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Female Posts: 299
  • Member since Nov '04
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2885 on: Aug 05, 2007, 06:18:41 PM »
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

red

  • Offline The 1.5K Club
  • **
  • Turtle Points: 199
  • Male Posts: 1,616
  • Member since Jan '05
  • irish redhead texan, interesting combo
    • View Profile
    • Buy me a beer
Re: Making Of The Willy Mammoth
« Reply #2886 on: Aug 05, 2007, 06:34:52 PM »
looks like somebody forgot to grease their joints!
read and comment :whip:

USAF EOD tech

Lady Di

  • Goddess of Mud
  • Internet Lassies
  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Female Posts: 299
  • Member since Nov '04
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2887 on: Aug 06, 2007, 07:03:10 PM »
I'm just posting the pics.. Mark will elucidate, but he says he doesn't have to get into the tranny... not sure if you can see the shiney metal in the little puddle..
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

Duffil

  • *lurker*
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 138
  • Male Posts: 4,844
  • Member since Nov '04
    • View Profile
    • PhotoBucket
    • Buy me a beer
Re: Making Of The Willy Mammoth
« Reply #2888 on: Aug 06, 2007, 07:05:28 PM »
I'm just posting the pics.. Mark will elucidate, but he says he doesn't have to get into the tranny... not sure if you can see the shiney metal in the little puddle..

???  you mean Illuminate?

edit: nevermind...I just learned a new word.

Lady Di

  • Goddess of Mud
  • Internet Lassies
  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Female Posts: 299
  • Member since Nov '04
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2889 on: Aug 06, 2007, 07:11:56 PM »
???  you mean Illuminate?

edit: nevermind...I just learned a new word.

:rofl:

I even spell checked!
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: Making Of The Willy Mammoth
« Reply #2890 on: Aug 06, 2007, 07:16:37 PM »
so  the tcase  went to :pokinit:  ???

but he says he doesn't have to get into the tranny...
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Lady Di

  • Goddess of Mud
  • Internet Lassies
  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Female Posts: 299
  • Member since Nov '04
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2891 on: Aug 06, 2007, 07:22:36 PM »
it didn't go to :pokinit:  he'll fill in the rest.
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

unclejpl4x4

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 348
  • Male Posts: 3,522
  • Member since Apr '05
  • Broke & rusted
    • View Profile
    • myspace
    • Buy me a beer
Re: Making Of The Willy Mammoth
« Reply #2892 on: Aug 06, 2007, 07:37:43 PM »
See anything wrong with this picture? This was before we went for our drive... and it was at the front diff :yikes:




a new tube of sillicon :dunno:
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Willy Mammoth [OP]

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 0
  • Male Posts: 4,252
  • Member since Nov '04
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2893 on: Aug 06, 2007, 08:47:31 PM »
???  you mean Illuminate?

edit: nevermind...I just learned a new word.



 :nope: she means edgeimacate

Well, ahh, um, in my mad dash to get everything back together when putting in the new 23 spline gears, I kind of forgot to put one of the snap rings back in and the input gear was grinding into the case and causing the input bearing to lockup.

So that means I don't have to rebuild the trany right now.  :crossed:

I need to clean everything up and put it (ALL) back together and get it back in so I can test drive it again.
:usa: American by birth, redneck by choice. 

Making Of http://board.marlincrawler.com/index.php?topic=6472.0  
 
Sightings Of  http://board.marlincrawler.com/index.php?topic=10805.0

MiniSimp

  • Outdoor Enthusiast
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 0
  • Male Posts: 5,120
  • Member since Jan '05
  • SimpsonBrothers.net
    • View Profile
    • Simpson Brothers Photography
Re: Making Of The Willy Mammoth
« Reply #2894 on: Aug 06, 2007, 09:09:33 PM »
I kind of forgot to put one of the snap rings back in
LOL, been there, luckilly I caught it before I put it back in. :_oops:

red

  • Offline The 1.5K Club
  • **
  • Turtle Points: 199
  • Male Posts: 1,616
  • Member since Jan '05
  • irish redhead texan, interesting combo
    • View Profile
    • Buy me a beer
Re: Making Of The Willy Mammoth
« Reply #2895 on: Aug 06, 2007, 09:36:22 PM »
doh!! been there done that
read and comment :whip:

USAF EOD tech

Willy Mammoth [OP]

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 0
  • Male Posts: 4,252
  • Member since Nov '04
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2896 on: Aug 07, 2007, 05:34:44 PM »
All clean and ready to go back together, any volunteers?

:usa: American by birth, redneck by choice. 

Making Of http://board.marlincrawler.com/index.php?topic=6472.0  
 
Sightings Of  http://board.marlincrawler.com/index.php?topic=10805.0

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: Making Of The Willy Mammoth
« Reply #2897 on: Aug 07, 2007, 05:40:43 PM »
clean tcase  and  R&P parts  YUM
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Lady Di

  • Goddess of Mud
  • Internet Lassies
  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Female Posts: 299
  • Member since Nov '04
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2898 on: Aug 07, 2007, 05:52:17 PM »
OH ME ME PICK ME :attention:
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

Lady Di

  • Goddess of Mud
  • Internet Lassies
  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Female Posts: 299
  • Member since Nov '04
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2899 on: Aug 07, 2007, 05:52:50 PM »

 :rofl:
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

FATTshack

  • Offline Rock Master
  • ***
  • Turtle Points: 129
  • Male Posts: 316
  • Member since Jun '05
  • BLUEY the WONDERSLUG
    • View Profile
    • The FATT Shack
Re: Making Of The Willy Mammoth
« Reply #2900 on: Aug 07, 2007, 06:01:42 PM »
 :behindwall:

79coyotefrg

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 1452
  • Male Posts: 22,633
  • Member since May '02
  • Solid axle Toys Rule ! ! !
    • View Profile
    • HotSprings Superlift ORV park
Re: Making Of The Willy Mammoth
« Reply #2901 on: Aug 07, 2007, 06:05:14 PM »
:willynilly:

RUN  EVERYBODY :willynilly: ITS BLUEY THE WONDERSLUG :willynilly:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Lady Di

  • Goddess of Mud
  • Internet Lassies
  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Female Posts: 299
  • Member since Nov '04
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2902 on: Aug 07, 2007, 06:20:42 PM »

  wanna play follow the leader again? :eyebrow:
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

Duffil

  • *lurker*
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 138
  • Male Posts: 4,844
  • Member since Nov '04
    • View Profile
    • PhotoBucket
    • Buy me a beer
Re: Making Of The Willy Mammoth
« Reply #2903 on: Aug 07, 2007, 06:49:19 PM »
All clean and ready to go back together, any volunteers?


sure. Ship it to me, I ain't skeered. :gap:

Willy Mammoth [OP]

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 0
  • Male Posts: 4,252
  • Member since Nov '04
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2904 on: Aug 07, 2007, 07:17:25 PM »
sure. Ship it to me, I ain't skeered. :gap:

Too late, I got the Tcase back together already.
:usa: American by birth, redneck by choice. 

Making Of http://board.marlincrawler.com/index.php?topic=6472.0  
 
Sightings Of  http://board.marlincrawler.com/index.php?topic=10805.0

Duffil

  • *lurker*
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 138
  • Male Posts: 4,844
  • Member since Nov '04
    • View Profile
    • PhotoBucket
    • Buy me a beer
Re: Making Of The Willy Mammoth
« Reply #2905 on: Aug 07, 2007, 07:22:12 PM »
Too late, I got the Tcase back together already.
Oh, well.  I'll take it like that I guess.



Did you use only Ultra Grey to seal that thing? I STILL can't find something to seal mine up with.

Willy Mammoth [OP]

  • Rock Ninja
  • Offline Gold Turtle Award
  • *
  • Turtle Points: 0
  • Male Posts: 4,252
  • Member since Nov '04
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2906 on: Aug 07, 2007, 07:24:55 PM »
Oh, well.  I'll take it like that I guess.



Did you use only Ultra Grey to seal that thing? I STILL can't find something to seal mine up with.

No and yes  :greengrin:
:usa: American by birth, redneck by choice. 

Making Of http://board.marlincrawler.com/index.php?topic=6472.0  
 
Sightings Of  http://board.marlincrawler.com/index.php?topic=10805.0

Lady Di

  • Goddess of Mud
  • Internet Lassies
  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Female Posts: 299
  • Member since Nov '04
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2907 on: Aug 07, 2007, 07:25:20 PM »
Before




after



:shake:

you guys (and gals) amaze me.
Life is like a bowl of beer flavored chocolate covered dog turds.. it makes no sense. :pokinit:

Where is the Mammoth?

How the Mammoth came to be

Number Two :pokinit:

reklund5

  • Offline The 1K Club
  • *
  • Turtle Points: 286
  • Male Posts: 1,263
  • Member since Nov '03
  • I love my Marlin Crawler!
    • View Profile
Re: Making Of The Willy Mammoth
« Reply #2908 on: Aug 07, 2007, 09:52:57 PM »
I've heard of quick-change rearends in racecars...but never of quick-change tranny/transfercase combos in rockcrawlers!

You must be getting pretty efficient at moving parts around and in/out of that thing by now!

Ryan
'84 Hilux, locked, dual-cased, winched, EFI converted, 37" tired, half-doored (in the summer...)
'87 Supra, 400 HP.  smooth as glass at 130 'cause my tires are NEW!...
'92 F250 Diesel, tow rig, ATS Turbo, leveling kit, killer stereo

FATTshack

  • Offline Rock Master
  • ***
  • Turtle Points: 129
  • Male Posts: 316
  • Member since Jun '05
  • BLUEY the WONDERSLUG
    • View Profile
    • The FATT Shack
Re: Making Of The Willy Mammoth
« Reply #2909 on: Aug 08, 2007, 03:49:23 AM »
  wanna play follow the leader again? :eyebrow:

eh...nope...LOL

would like to go wheel again with you guys though.

 
 
 
 
 

Related Topics

4 Replies
3693 Views
Last post Nov 18, 2004, 08:02:48 PM
by SWAMPER
2047 Replies
590513 Views
Last post Nov 28, 2009, 09:43:30 PM
by 79coyotefrg
12 Replies
5732 Views
Last post Oct 25, 2005, 02:45:31 PM
by dj
9 Replies
4270 Views
Last post Sep 28, 2006, 10:26:58 AM
by cruzila
67 Replies
19434 Views
Last post Jun 27, 2007, 02:59:06 PM
by unclejpl4x4