So we went to the dyno today and I was wrong on what we had on the dyno from over a year ago.... Our first pull today was putting 125hp and around 140ft lbs of tq to the ground which was right about where we were two years ago. By the end of our tuning we had put down 138hp and had dropped about 3ft lbs of tq but opened up the tq curve to last for about 1500 more rpms! Our previous pulls were only going up to 6300 rpm and today we were able to run it up to 6900 rpm! At 6500 rpm we had a 25hp gain from before! When they email the info to me I will post up the curves.
Jason