OVRAROK. My 87 4runner

[redneckcustoms13]

Don't part with it till yours runs! I learned the hard way and had to go to the junk yard for a few odds and ends

[OVRAROK]

Don't part with it till yours runs! I learned the hard way and had to go to the junk yard for a few odds and ends

what did you forget

[OVRAROK]

he's right, you should hold onto the donor till the swap's finished.

agreed, ill keep it around until its finished. today I will be pulling bellhousing, clutch master, slave and all lines pertaining to clutch, hard fuel lines from tank to engine bay, exhaust. all wiring, dash cluster.

[HogCanyonHopper]

      

[chim]

As if the Toyota's aren't cool enough I spy a 68 and a 69 Camaro!

[redneckcustoms13]

That's what I'm screaming. The weber grill is a nice touch too

I forgot the obd plug, throttle cable, and a few other junks

[OVRAROK]

End of day 2, removed all wiring, from headlights, to taillights, only thing left are hard fuel lines, and power steering hoses, and managed to put it all back together

Sent from my HTC One_M8 using Tapatalk

[Nation]

hecks yeah buddy!

[OVRAROK]

Santa's sleigh must have broke down, some guy in a brown truck dropped this off

Sent from my HTC One_M8 using Tapatalk

[OVRAROK]

draining fluids. Will pull old, and install new tomorrow

Sent from my HTC One_M8 using Tapatalk

[HogCanyonHopper]

 

[jimbo74]

that is pretty nice looking for old

[emsvitil]

I own page 17    

Santa's sleigh must have broke down, some guy in a brown truck dropped this off

Sent from my HTC One_M8 using Tapatalk

Oil Pan
Dip Stick
Oil Pickup tube / strainer  with gasket

Some bolts for what?

and

a tube thingie ??


What's the tube thingie?

[OVRAROK]

I own page 17    



Oil Pan
Dip Stick
Oil Pickup tube / strainer  with gasket

Some bolts for what?

and

a tube thingie ??


What's the tube thingie?

on the left of drainer is the block off plate, which requires 4bolts, for front sump oil dipstick tube thingy with rear sump pan, the tube thingy holds my dipstick in a different spot

[jimbo74]

heck, this motor is going to be in before I get up there

[OVRAROK]

More stuff

Sent from my HTC One_M8 using Tapatalk

[jimbo74]

those are pretty.....

[HogCanyonHopper]

I have those mounts and pump bracket on my truck. legit 

[emsvitil]

What's the mount on top for?

[SqWADoosh]

What's the mount on top for?

Its the Chillkat Designs 3rz TC pump bracket.

[OVRAROK]

So, only things left on list of parts I need, is 17/32 freeze plug, Dorman # 555-007, and high pressure fuel line made to connect from 87 tank to 97 hard fuel lines, only 1 thing on the want list. Mini tube header off 01-04 3rz .I have 3 cast exhaust manifold with no cracks, so I should have some time to obtain oem header .Also need a couple j bend exhaust tubes, mandrel bent of course, to make crossover tube for exhaust

[redneckcustoms13]

Good luck with the install today. I hope your mounts work.

[OVRAROK]

Good luck with the install today. I hope your mounts work.

do to parts getting here late, I need to paint a few parts. Regarding mounts, I figured I could make a shim if needed. spending the day cleaning up the garage. I get flustered when I cant find a tool. so before I start install, I going to try to organize a bit

[1985CRAWLER]

Nice work Dave ! Coming along quickly ! I'm sure the thing will be way past done by memorial weekend .

I really liked my chilkat mounts , I was surprised I didn't have to do to them and motor sat perfect , that was using new 22re motor mounts too haha

Btw you have a buyer for your old 22RE yet ? What were you thinking of $ range ?

[OVRAROK]

Nice work Dave ! Coming along quickly ! I'm sure the thing will be way past done by memorial weekend .

I really liked my chilkat mounts , I was surprised I didn't have to do to them and motor sat perfect , that was using new 22re motor mounts too haha

Btw you have a buyer for your old 22RE yet ? What were you thinking of $ range ?

id take 1300 for 22re, 16,000 miles, thats from air cleaner to exhaust tip. it has 261 cam, bored TB lc engineering header with 2.25 stainless steel exhaust. includes clutch too. never been abused, doesn't leak a drop of oil. all factory rubber hoses are all new, silicone vacuum lines, 130 amp alternator, was just rebuilt

[OVRAROK]

I own page 17    



Oil Pan
Dip Stick
Oil Pickup tube / strainer  with gasket

Some bolts for what?

and

a tube thingie ??


What's the tube thingie?

I just wanted to correct myself, the block that goes in the side of the oil pan which takes the 4 bolts, is a deflector for the oil dipstick

[HogCanyonHopper]

 

[OVRAROK]

just ordered my oem mini tube exhaust manifold, part #17141-75080, and gasket# 17173-75020 

[jimbo74]

just ordered my oem mini tube exhaust manifold, part #17141-75080, and gasket# 17173-75020 

💪😎

[OVRAROK]

Picked up a high pinion diff from dingman, thanks bro

Sent from my HTC One_M8 using Tapatalk