Author Topic: Mikes Runna Project (Fresh pics)! (Read 25391 times)

b_ripper8 · « **Reply #60 on:** Mar 29, 2005, 09:07:43 PM »

Thanks for keeping me updated Mike D. I've been in Buena Vista, CO the last two days with no internet access. I did remove my prop valve so I'm not sure what goes from here. A good friend of mine converted his drums to discs the same way i did a couple years back and said he had the same problem at first but it eventually fixed itself after a few weeks of bleeding. Needless to say, you'll get good at it.

scheid6996 · « **Reply #61 on:** Mar 29, 2005, 11:05:51 PM »

so it will take mike D a few months, hes a lil slower than most

b_ripper8 · « **Reply #62 on:** Mar 30, 2005, 12:17:38 PM »

I was looking at this reverse brake bleeding system that pushes the fluid back into the master cylinder. Seems like a good idea and not too expensive. Has anyone used this tool before?
http://www.performanceproducts.com/ProductPage.aspx?productname=Mityvac+Brake+Bleeder+Kit&productid=104170&producttype=10&referer=1469

MidgetMike · « **Reply #63 on:** Mar 30, 2005, 02:11:06 PM »

Looks good man what rear disk conversion set up is that $Beer Chug\'n$

Mike D · « **Reply #64 on:** Apr 03, 2005, 02:39:00 PM »

I'm still wiring up the rear locker, I just don't have that much time cause i'm workin alot.I still need to pick up some double throw relays cause i got the wrong ones then i'll almost be done them i'll post up some pics of the wiring

that is skys kit.

I need to order the adjustable porp valve so my rear brakes will actually work and I'm also gonna order sky's driveline e-brake kit cause I really need an e-brake

scheid6996 · « **Reply #65 on:** Apr 03, 2005, 02:41:00 PM »

hey get the willwood valve

Mike D · « **Reply #66 on:** Apr 03, 2005, 02:57:49 PM »

Thats the one i'm getting 40 bucks isn't to bad.

I'm gonna try and get off of work on wensday to go and get my bug painted

scheid6996 · « **Reply #67 on:** Apr 03, 2005, 03:04:10 PM »

its about freakin time, whos paintin it? how much?

Mike D · « **Reply #68 on:** Apr 03, 2005, 03:52:45 PM »

I'm having it done at macco and its gonna be around 600ish

scheid6996 · « **Reply #69 on:** Apr 03, 2005, 05:20:19 PM »

nice nice get-R-done

b_ripper8 · « **Reply #70 on:** Apr 03, 2005, 11:07:27 PM »

Mike D, I have Sky's e-brake kit and I highly recomend that before you put it on, replace all the nuts with nylock nuts. I lost 3 after only 300 miles. Other than that it's a great buy.

scheid6996 · « **Reply #71 on:** Apr 03, 2005, 11:08:23 PM »

too late, he already put it on, but it just doesnt work 4

b_ripper8 · « **Reply #72 on:** Apr 03, 2005, 11:11:59 PM »

The e-brake doesn't work?

scheid6996 · « **Reply #73 on:** Apr 03, 2005, 11:15:06 PM »

no his rear breaks dont stop 4

, his drums worked better, do u still have the stock proportchining valve on urs?

b_ripper8 · « **Reply #74 on:** Apr 03, 2005, 11:21:33 PM »

No, torched it off.

scheid6996 · « **Reply #75 on:** Apr 03, 2005, 11:22:19 PM »

well i think hes gone use a willwood

Mike D · « **Reply #76 on:** Apr 04, 2005, 09:14:18 PM »

the nuts that came with it were nylock. yeah I'm gonna use a willwod adjutable porp

So heres the down low, I have completly fined wiring up the rear locker and it works perfect but on the test drive to see if it works i noticed a super loud grinding in my front end, so I pulled off the drivers side hub and all the rollers from my bearing fellout of the bearings,

Oh and guess what those are new bearings not even 500 miles on them

and they were purchased at shucks. Oh and my brand new shucks power steering pump is leaking from where the two halves are bolted together.

Skinny_Pedal · « **Reply #77 on:** Apr 04, 2005, 09:19:27 PM »

shitty parts, shitty life

Mike D · « **Reply #78 on:** Apr 04, 2005, 09:25:46 PM »

shitty parts yes
Shitty life ?

lilbuddy · « **Reply #79 on:** Apr 04, 2005, 09:34:34 PM »

I think it might mean shitty parts = shitty life

Skinny_Pedal · « **Reply #80 on:** Apr 04, 2005, 09:38:23 PM »

Quote from: lilbuddy on Apr 04, 2005, 09:34:34 PM

I think it might mean shitty parts = shitty life

yep

Mike D · « **Reply #81 on:** Apr 04, 2005, 09:40:29 PM »

well said

mudaddict · « **Reply #82 on:** Apr 04, 2005, 11:19:18 PM »

hahahahahaha that sucks take it back it probly ahs a warranty haha work the system thats what im gonan do and i work there haha its fairly easy if you get the stuff with warantys sorry bout the bearings all the bearings there suck balls anyways would not recomend them! same with u joints they aint to good either! i got a list i could go on but some of the stuff is good only ordered stuff is the way to go! hey mike nice ta see ya the other night ahha sorry couldnt help ya out with parts but not a comon car no one likes em anyways!

scheid6996 · « **Reply #83 on:** Apr 05, 2005, 10:57:53 AM »

damm mike that sux dude falken GAY shucks shucks sucks

Mike D · « **Reply #84 on:** Apr 06, 2005, 06:05:20 PM »

its all the same brand as the napa crap. i got it all and it will be done for saturday at reiters

scheid6996 · « **Reply #85 on:** Apr 07, 2005, 02:59:05 PM »

YAY, who all is goen, if u wana meet up with me N mike PM me

Mike D · « **Reply #86 on:** Apr 09, 2005, 12:46:32 AM »

My truck is all done now but my power steering does not work very well it is really hard to turn

Mike D · « **Reply #87 on:** Apr 09, 2005, 01:00:07 AM »

Oh and now my brakes work awsome i can lock up all four tires

Mike D · « **Reply #88 on:** Apr 13, 2005, 11:11:02 PM »

the steering now works perfect

And i just bought new exhaust since i just ripped mine off

mudaddict · « **Reply #89 on:** Apr 13, 2005, 11:29:08 PM »

sweet deal im getting a new one when i get my truck back mine is hella rusty!

Mike D [OP]

Mike D [OP]

Mike D [OP]

Mike D [OP]

Mike D [OP]

Mike D [OP]

Mike D [OP]

Mike D [OP]

Mike D [OP]

Mike D [OP]

Related Topics