Glen's budget rebuild

Started by 79coyotefrg, September 26, 2004, 05:30:02 PM

0 Members and 39 Guests are viewing this topic.

Print
Go Down Pages 1 ... 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 ... 105
User actions

79coyotefrg

#2730
December 27, 2008, 12:59:06 PM
well i hooked the cable up and didnt like the way it was attached, Jordan had modified the arm, so i ground off his weld and put it back on the way it was supposed to be, here's the pics in order













AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#2731
December 27, 2008, 01:05:03 PM
first try didnt hold, so i adjusted it up some and WOW it holds GREAT





AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4

#2732
December 27, 2008, 01:13:02 PM
:clap2:  verry nice MR glen    now will it hold on that old trail  2 no wares in  the ross foundation
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

#2733
December 27, 2008, 01:49:00 PM
um :nerv:  i think it would with a little more adjusting
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

BUBBA

#2734
December 27, 2008, 02:37:04 PM
I liked that trail. Lots of tree grease.
87 4runner 350 with custom dent package. 
My budget beater

79coyotefrg

#2735
December 27, 2008, 02:49:25 PM
Quote from: King BUBBA on December 27, 2008, 02:37:04 PM
I liked that trail. Lots of tree grease.
dont you know all them hickory trees that had been hit by lightning would tear a chain saw up :ack:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Jordan7118

#2736
December 28, 2008, 01:13:52 PM
Yea, it wouldn't work without cutting it up on my rotated t-case.

Looks good, Glen!

79coyotefrg

#2737
December 28, 2008, 06:54:53 PM
Quote from: Jordan7118 on December 28, 2008, 01:13:52 PM
Yea, it wouldn't work without cutting it up on my rotated t-case.

Looks good, Glen!
thanks
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4

#2740
January 09, 2009, 04:43:42 PM
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

#2741
January 09, 2009, 05:57:38 PM
and its 4wd from the looks of it :drool:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

46&2

#2742
January 09, 2009, 07:09:01 PM
That thing is awesome! :love:
85 4Runner Build  /  Cool Foreign Toyotas  /  Toyota: We Want Diesel FB Page    Rockcrawlintoy – i guess moms will put the pups up on the beach when they go fisting

Jordan7118

#2743
January 09, 2009, 07:59:29 PM
Quote from: 79coyotefrg on January 09, 2009, 05:57:38 PM
and its 4wd from the looks of it :drool:

...plus it says 4x4 in the ad in a couple places...    :think:                     :rofl2:





I wish there was a "yankin' your chain" smilie...  :sad2:

79coyotefrg

#2744
January 11, 2009, 01:28:34 PM
Quote from: Jordan7118 on January 09, 2009, 07:59:29 PM
...plus it says 4x4 in the ad in a couple places...    :think:                     :rofl2:





I wish there was a "yankin' your chain" smilie...  :sad2:
:headscratch:  but its a cute wittle camper :dunno:



OK  incase yall didnt see the ebrake getting used last saturday  i adjusted the cable again before the "shake down" and installed a thimble so the cable doesnt kink and MAN it will hold the truck on a 45* angle  :woohoo:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#2745
January 11, 2009, 01:30:34 PM
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#2746
January 11, 2009, 01:36:00 PM
here i am using the ebrake to hold the truck so i can keep my foot on the gas
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

KDXSR5

#2747
January 11, 2009, 01:38:09 PM
I need to get one of those e-brakes. But I have no $$ :(. Looks to be worth the $$ though! :thumbs:

DTB

#2748
January 11, 2009, 01:49:31 PM
Quote from: KDXSR5 on January 11, 2009, 01:38:09 PM
I need to get one of those e-brakes. But I have no $$ :(. Looks to be worth the $$ though! :thumbs:

I'm pretty sure you are required by law to have one!  :cheese:
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

Rocksurfer

#2749
January 11, 2009, 02:37:14 PM
Yeah there are a lot of things you are supposed to have and then there are a lot of things you are not supposed to have too. I see we all are following the vehicle codes around here. Though I do think an e-brake is very important to have. What would you do if you hit your brakes and the pedal went to the floor? Me I pull the ebrake, and I guess you could start dragging your feet.
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

DTB

#2750
January 11, 2009, 02:41:13 PM
Quote from: Rocksurfer on January 11, 2009, 02:37:14 PM
Yeah there are a lot of things you are supposed to have and then there are a lot of things you are not supposed to have too. I see we all are following the vehicle codes around here. Though I do think an e-brake is very important to have. What would you do if you hit your brakes and the pedal went to the floor? Me I pull the ebrake, and I guess you could start dragging your feet.

:driving: throw it in first gear and engine break!
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

Rocksurfer

#2751
January 11, 2009, 02:57:25 PM
Quote from: DirToyBoy on January 11, 2009, 02:41:13 PM
:driving: throw it in first gear and engine break!

...and break your engine. Plus that might slow you down but you need to stop.
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

79coyotefrg

#2752
January 11, 2009, 02:57:48 PM
i had stock ebrakes that worked fine to keep the truck from rolling forward but they didnt do alot  for holding it from rolling back, this thing WORKS much better than the stock ebrake ever thought about

luckily i got mine for $150 :disturbed:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

THK Matt

#2753
January 11, 2009, 04:25:05 PM
i need an ebrake :outtahere:
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

DTB

#2754
January 11, 2009, 04:30:24 PM
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

THK Matt

#2755
January 11, 2009, 04:39:06 PM
Quote from: DirToyBoy on January 11, 2009, 04:30:24 PM
PM [email protected] for a used one

i have one in my 87, im lazy lol
I never used my ebrake before though.. .as it sucked.
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

DanS

#2756
January 11, 2009, 05:14:28 PM
I swear by my Rear output shaft (driveshaft) brake, works under extreme heat, under water, covered with mud and should the drive shaft break lock the transfer case in 4WD and it still works.
It is pricey, but just to have all that factory, prone to seize, parking hardware gone is a plus  :yesnod:
Of course it's just my opinion for what it is worth.
             DanS
Wow, been looking at my 4Runner rust away too long, need some inspiration and here I will find it...!

85 Toyota 4Runner, solid axle, 22Re, original paint and graphics and not a straight panel to be found!

DTB

#2757
January 11, 2009, 05:19:23 PM
Quote from: DanS on January 11, 2009, 05:14:28 PM
I swear by my Rear output shaft (driveshaft) brake, works under extreme heat, under water, covered with mud and should the drive shaft break lock the transfer case in 4WD and it still works.
It is pricey, but just to have all that factory, prone to seize, parking hardware gone is a plus  :yesnod:
Of course it's just my opinion for what it is worth.
             DanS

Right..and what happens if you (or a kid, dog or person) knocks it out of gear or the tranny pops out on its own?
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

DanS

#2758
January 11, 2009, 05:22:26 PM
Lock the doors   :smack:
Wow, been looking at my 4Runner rust away too long, need some inspiration and here I will find it...!

85 Toyota 4Runner, solid axle, 22Re, original paint and graphics and not a straight panel to be found!

Jordan7118

#2759
January 11, 2009, 05:31:00 PM
I have no e-brake nor t-case brake. I'm honestly nervous when I leave it on a hill on a trail in gear    :nerv:
Print
Go Up Pages 1 ... 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 ... 105
User actions