Glen's budget rebuild

Started by 79coyotefrg, September 26, 2004, 05:30:02 PM

0 Members and 28 Guests are viewing this topic.

79coyotefrg

Quote from: V-Man on August 03, 2009, 03:53:46 PM
  Yes the .440 is nice if the/my motor is running.... :mad:.... :cheese: :love: ya Glen..
:down:  sorry Mike,  i know i'm draggin my butt between being and feeling :sick:  i dont get much
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

i went to meet one of my Oklahoma buds saturday and got my new to me tires,  same 35-12.50's but these are Maxxis Big Horns,  and MAN do they ride BUNCHES AND BUNCHES better than those wild country things,  :woohoo:

of course the 200 mile round trip about killed me,  pretty much stayed in bed all day sunday :thud: 
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

baldwookie

i get my junk runnin reliable bro... i ll come down do the wrenchin just gotta tell me what to do.....i want to learn
1980 lwb sr5  stock

BigMike

Ninety...............







Eight................






Pages......................














:thud:
Check out our new Rock Crawling Videos!
2016 56-speed 580:1 Tacoma Rock Crawler   
1981 36-speed 511:1 3RZ-FE Rock Crawler
1987 6-speed Supercharged 4A-GZE MR2
Instagram: @SlowestTacoma
Things are only impossible until they are not.
"The worst of both worlds, the best of neither." -abnormaltoy
"An informed question. But difficult to answer. I am what you see." -Nanaki

BUBBA

Quote from: BigMike on August 03, 2009, 11:50:16 PM
Ninety...............







Eight................






Pages......................














:thud:

and still nothing interesting happening here :beerchug:
87 4runner 350 with custom dent package. 
My budget beater

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Jordan7118

 :flamed:

I wish they had a crying baby emoticon...

Glen, you big wimp!  :yupyup:

It's darn hot, but nothing you can do about that  :smack:

Dr.Maxwe001

yep the southern heater is on across the south so dont mess with the guy's from the southeast
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

79coyotefrg

Quote from: Jordan7118 on August 04, 2009, 10:35:18 PM
:flamed:

I wish they had a crying baby emoticon...

Glen, you big wimp!  :yupyup:

It's darn hot, but nothing you can do about that  :smack:
yea i know i'm a big baby but the old ticker gets angry when its hot
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Jordan7118

Quote from: 79coyotefrg on August 05, 2009, 07:25:36 AM
yea i know i'm a big baby but the old ticker gets angry when its hot

Word... I'm just yankin' yo' chain.

See ya tomorrow! Woot!

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

:rivers:   something let go in the motor :rivers:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

BUBBA

87 4runner 350 with custom dent package. 
My budget beater

Dr.Maxwe001

IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

Prismo

Quote from: maxwe001 on September 02, 2009, 11:55:40 AM
could it be a bad lifter ?

22r has no lifters so I would guess not
Retired Great White Turtle Hunter
Originally posted by fortysixandtwo – sheesh, you should see the transvestites i sell ammo to sometimes

mudmaster

Time to go wheelin!

SWAMPER

dang glen well just up grade whatever broke :bud:
1985 Toyota Pick/Up longbed...bobbed 15",  lifted 5", 36's.....http://board.marlincrawler.com/index.php?topic=36992.0

GJToyotabug


Dr.Maxwe001

QuotePosted on: Today at 01:05:04 PMPosted by: Prismo  
Insert Quote
Quote from: maxwe001 on Today at 12:55:40 PM
could it be a bad lifter ?



I was being a smart :moon: I know toys dont have lifters silly
IF YOUR LOOKING OUT THE FRONT OF YOUR 4X4 AND YOU CANT SEE THEN JUST TURN ON YOUR WIPERS. BUT THEN THINGS GET ALL MESSED UP LIKE IN LIFE.

WHEN YOU GET TO THE END OF YOUR ROPE JUST THINK THAT ALONG TIME AGO  YOU WERE THE FASTEST LITTLE SWIMMER TO THE EGG

08:55:22 PM BeccaLoo24 – i like to screw things

$99 scratch and dent drill press has drilled more holes than Ron Jeremy.


http://board.marlincrawler.com/index.php?topic=48342.0




[img]http://bo

unclejpl4x4

Quote from: 79coyotefrg on September 02, 2009, 11:26:52 AM
:rivers:   something let go in the motor :rivers:

:down:   thats blows  sorry to here that glen  :beer:
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

hilux-1983

DD, 22R, L52HD, 35"s, All pro/Marlin Hysteer, 529's, Aussie Locker in rear only. 5" All Pro springs and 5" shackles. Just purpose built and dependable. A/C blows like ice too... www.4x4HIM.org

79coyotefrg

i was heading over to my chiropractors house, got on the interstate, running fine zipped right up to 75mph just cruisin along and WACKAWACKAWACKAWACKA and it died,   i got it back running before it got stopped so i looked in the mirror and had room so i hit the median, got back up a little speed with my 4 ways on (35 was the best i could do) and traffic let me slide over to the right shoulder and i limped it back home maybe 6 miles total,  first mile it sounded like it had a rod about to fly thru the side of the block very loud WACKAWACKAWACKAWACKA and i was waiting for the BOOOOMMM  but luckily it never came, 

i pulled the plugs first and ran a compression check after i came in and cried in my koolaid,  so it was a little warm  but not hot, 

compression numbers  #1 - 135, #2 - 135, #3 - 20, #4 - 125

oil looked clean and didnt have any chunks,  valves all looked good so beats me,  i have to go to the doctor tomorrow so probably wont get the head pulled till friday  :down:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

GJToyotabug

uhh sounds like your rod might have shot through your piston. and with good ol number 3 cylinder  being a constant weakness its possable

unclejpl4x4

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

GJToyotabug

idk why exactly not enough oil and water around it? just when every 22R lets go it has something to do with the #3 or timing chain

79coyotefrg

well, if you go back in the ealy parts of this thread, you'll see i had some trouble with #4,  i think i busted #4 piston 3 times and #3 once.  this will be the second time, if thats what it is, i'm going to find another block,  its such a pain finding .060 over size pistons
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

i have another block and crank,  about a dozen rods,  but i hope its something simple like a cracked piston
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way