Glen's budget rebuild

[toybuilt]

stickers arn't that much, are they     

[BUBBA]

a good working horn always comes in handy

unless your 4wheeling and always hitting it,then it get's annoying and embarissing.

[79coyotefrg]

unless your 4wheeling and always hitting it,then it get's annoying and embarissing.

thats why its on the dash by the cig lighter     

[Rocksurfer]

unless your 4wheeling and always hitting it,then it get's annoying and embarissing.

I do that all the time, I just tell everyone I'm letting them know I'm coming and to get out of the way or I'll run your over.

[79coyotefrg]

    uh  they did work,  i was spraying the engine off and got water into one now it no workie

[toybuilt]

     thats just to funny, time for a new horn  

[79coyotefrg]

well the #2 alternator is installed
now all i need to do is get the bolts all tight


today i managed to rebuild the other rear spring


top 2 toy leafs*=======*
then a chevy ---------------
then 1 front leaf-------------
3rd toy leaf -----------
then my add a leaf--------
divingboard --------

pics??

[79coyotefrg]

worked on the new torque rod mount , i'll get some pics of that

[79coyotefrg]

 

[79coyotefrg]

 

[79coyotefrg]

 

[DTB]

 

[79coyotefrg]

thats what the deer do at night

[79coyotefrg]

who needs longer brake lines 

[79coyotefrg]

i think i need to make a new header     them tubes is gettin thin

[BUBBA]

atleast you can't see inside from that pic

[79coyotefrg]

hey  d0o ya think my stitches will hold,  im thinking a large "boot/patch"  inside then a tube

[79coyotefrg]

van seats

[BUBBA]

hey  d0o ya think my stitches will hold,  im thinking a large "boot/patch"  inside then a tube

I believe I'd try and find me another tire  youv'e got to be kidding right.

[Rocksurfer]

  OMG PICTURES!!!!!





That tire is scary.

[79coyotefrg]

oh come on  it'll be fine with a big patch and a tube 

[BUBBA]

YEAH RIGHT,as long as you don't get over 5mph.

[IronClad]

seen it done alot.. but.. i dunno how much id trust it on  a mainly street driven rig... it works and all but.. yeah

[79coyotefrg]

i have done it with good results on tractors  and roadgraders  but  never on a pickup tire,  that might see 80 mph     

[Rocksurfer]

i have done it with good results on tractors  and roadgraders  but  never on a pickup tire,  that might see 80 mph     

BOOM!!

[IronClad]

i really wouldnt do it.. (this is comming from a guy that welded a 15" rim inside of 16" rim  because the backspacing was wrong) go get a new tire dude i wouldnt feel safe running running near 80mph with a tire like that.. and id only do it if i absolutely had to to get home. keep it as yer spare and get another.

[79coyotefrg]

yea  i think your right i got a worn out 33  mounted on the rim till i can afford 1 tire 

[4inchToyotas]

Do you have any details on the spring setup you're using? Lift height, front pack composition, rear pack composition? Don't give away anything "Top Secret"...just trying to get all the options.

[79coyotefrg]

Do you have any details on the spring setup you're using? Lift height, front pack composition, rear pack composition? Don't give away anything "Top Secret"...just trying to get all the options.

front spring pack

top 2 are stock yota front springs, 3rd-is the 3rd from a chevy S10 2wd ,then 4th-a old blackdiamond add a leaf, but you could use another slightly shorter 2wd leaf,  then the rest of the stock toy pack

rear

top 2 are toy,  3rd  is the 2nd long leaf from a 2wd S10, 4th is the 3rd stock leaf from the front packs,
then 5th --my old blackdiamond leaf, sent you pics didnt I ??
then the rest of the stock toy pack

[4inchToyotas]

yeah, I got the pics but I wasn't sure of the composition or actual lift height...trying to clear high-steer