A.J.'s Runner - "Please Stand-by"...Product Review

Started by CTENG in KS, July 14, 2004, 01:22:37 PM

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 ... 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 ... 56
User actions

CTENG in KS

#1230
April 06, 2008, 02:17:30 PM
The fuel pump mount is welded on the frame and I got to disassembling everything and ready for paint.





IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#1231
April 06, 2008, 02:19:32 PM
Ooooooh prity!!!
I finished the skid plate for the fuel line too.





IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

*** YELLER ***

#1232
April 06, 2008, 07:05:29 PM
AJ that thing is lookin' sweet bud nice work  :thumbs:



:usa: :beerwhack:
MY ONLY REGRET IS THAT I HAVE NOTHING USEFUL TO OFFER THIS FORUM  :moon:
except BACON

skipnrocks

#1233
April 06, 2008, 07:28:06 PM
Quote from: oldyellercj on April 06, 2008, 07:05:29 PM
AJ that thing is lookin' sweet bud nice work  :thumbs:



:usa: :beerwhack:
X2 man!!   fresh black looks awesome!  Bet it feels good to get done and put some paint on there!
Life is too short!!!   Do something with it!!!

WILLYNILLY
http://board.marlincrawler.com/index.php?topic=23944.new#new

CTENG in KS

#1234
April 06, 2008, 07:42:36 PM
It did till I found out we weren't going to Tellico.  Now where is my inspiration!?

Ahh well.  I will try to get the tank plumbed and see if I can get her to run off the new fuel cell this week.  I will need to either find another event or start the rear links.  Not decided which yet.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

unclejpl4x4

#1235
April 07, 2008, 05:56:38 AM
wow I got a stiffy just looking at that
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

CTENG in KS

#1236
April 08, 2008, 04:46:50 PM
Installin the fuel cell...





IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

unclejpl4x4

#1237
April 08, 2008, 11:00:52 PM
I still think that fuel line needs buffing............

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

CTENG in KS

#1238
April 11, 2008, 05:18:14 PM
Can;t have a dirty white spare rim on my nice black flatbed!  Some Gloss Black tractor paint will take care of that!  :flamer:

IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

yotadork83

#1239
April 11, 2008, 07:12:31 PM
took you long enough.
83 toyota shortbed, 90 rear axle, 5.29's f/r, spools f/r, 22/20 hybrid w/propane, 37 mtrs. dual transfer cases. http://board.marlincrawler.com/index.php?topic=22712.0
yotas 4 life homie!

CTENG in KS

#1240
April 11, 2008, 08:07:00 PM
Oh come now...it wasn't like it was getting shown off in public or anything.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#1241
April 12, 2008, 04:43:05 PM
Plumbed and wired.    :thumbs:







IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

Willy Mammoth

#1243
April 14, 2008, 01:19:55 PM
Does it run yet? :yupyup:
:usa: American by birth, redneck by choice. 

Making Of http://board.marlincrawler.com/index.php?topic=6472.0  

Sightings Of  http://board.marlincrawler.com/index.php?topic=10805.0

THK Matt

#1244
April 14, 2008, 01:21:29 PM
PUUUUURRRRDAYYYYY!
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

CTENG in KS

#1245
April 14, 2008, 02:09:44 PM
No run yet...no gas in teh tank.  I gotta dig out all the crap from the garage so I can get to the truck.  I am a messy werker.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#1246
April 14, 2008, 05:50:23 PM
Roll-over valve is installed and I got started on the wiring.



IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

THK Matt

#1247
April 15, 2008, 09:35:41 AM
are you going to shrinkwrap all the wire connections? that'd top it off! looking nice AJ
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

unclejpl4x4

#1248
April 15, 2008, 09:55:47 AM
i have a ? what keeps water/dirt out of the roll over valve
?
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

CTENG in KS

#1249
April 15, 2008, 09:59:11 AM
nothing currently...I have yet to decide what I want to do.  Technically it should be a hose running from the valve to the charcoal cannister.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

THK Matt

#1250
April 15, 2008, 10:00:30 AM
the charcoal canister is for the fuel system?
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

CTENG in KS

#1251
April 15, 2008, 10:01:56 AM
What did you think it was for.  That is where the vent from your gas tank goes.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

THK Matt

#1252
April 15, 2008, 10:02:33 AM
:outtahere:
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

DTB

#1253
April 15, 2008, 10:03:45 AM
Quote from: ImaHoToy87 on April 15, 2008, 10:00:30 AM
the charcoal canister is for the fuel system?
the charcoal can is part of the emmissions control system. It traps and stores fuel fumes when the engine is not running
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

THK Matt

#1254
April 15, 2008, 10:07:01 AM
Quote from: DirToyBoy on April 15, 2008, 10:03:45 AM
the charcoal can is part of the emmissions control system. It traps and stores fuel fumes when the engine is not running

screw emissions :beerchug: is it essential to a non CARB truck? just curious, sorry for the thread jack AJ.
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

CTENG in KS

#1255
April 15, 2008, 11:23:39 AM
No, not essential at all.  I could put a little filter on that vent and run it open to the air if I wanted to.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#1256
April 15, 2008, 07:04:27 PM
...



IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

unclejpl4x4

#1257
April 15, 2008, 07:06:54 PM
dude thos tires don't match  you got wash/ black magic
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

CTENG in KS

#1258
April 15, 2008, 07:45:19 PM
You volunteering?
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0

CTENG in KS

#1259
April 16, 2008, 05:55:55 PM
Started it off the fuel cell for the first time.  She runs great, only adjustment was I had to turn down the idle a bit.  I am wondering if the pressure is a little high.

The fuel pump wirrrrrrrrrs pretty good when I turn the ACC key, but once the engine is running it is low background noise.  I am pretty satisfied with it.  The fuel gauge reads backwards due to the chevy sending unit in the tank.  Fine with me, I don't care as long as it works.
IFS is best kept at ambient temperature in a pile of scrap in the backyard.  When kept under a functioning vehicle, it tends to greatly diminish said vehicle's offroad ability.     -reklund5

4Runner: http://board.marlincrawler.com/index.php?topic=4580.0
Beastmaster: http://board.marlincrawler.com/index.php?topic=34339.0
Print
Go Up Pages 1 ... 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 ... 56
User actions