Author Topic: 2000 Tacoma getting one tons (new snow wheeling pics) (Read 21711 times)

86rustbucket · « **on:** Aug 09, 2012, 11:53:16 PM »

So I've been slowly parting out my built toy axles to put one tons and a 3rz in my 86 single cab then I found a smokin deal on this Tacoma so I think I'm just gonna throw everything on here and ditch the 86.

It is a 2000 x-cab sr5 model with the 3rz motor and w59 transmission so putting my dual cases in will be a breeze.
It's got 4 seats and air conditioning so I think it will be much better for me and the family.

Plans are
Dana 60 front
Dana 70 rear
39.5 iroks
Marlin duals with inchworm 5 to 1
shorten the wheel base to about 119''
double bob the bed to match.

I have messed up back right now so progress may be alittle low at first but I think I have enough parts to keep it interesting.

How I got it

The damage

Got a used bumper, made a huge difference

Toy-Cra-Ze · « **Reply #1 on:** Aug 10, 2012, 08:29:37 AM »

Definatley going to be following this build. I like seeing SAS'ed tacoma's!!

TimberlineBryce · « **Reply #2 on:** Aug 10, 2012, 08:33:19 AM »

jrock · « **Reply #3 on:** Aug 10, 2012, 11:10:41 AM »

THK Matt · « **Reply #4 on:** Aug 10, 2012, 12:48:36 PM »

hell ya brutha! 2nd gen tacomas are sweet sas'd

83 Crawler · « **Reply #5 on:** Aug 10, 2012, 02:41:15 PM »

do they still make 5 to 1s?

86rustbucket · « **Reply #6 on:** Aug 10, 2012, 11:28:21 PM »

Quote from: 83 Crawler on Aug 10, 2012, 02:41:15 PM

do they still make 5 to 1s?

I don't think so. I got a set used from a buddy a couple years ago and they've been good to me.
they're only 21 spline which worrys me a little but I should be OK as long as I don't get to stupid.

Here's the front axle. Its almost ready to go. Its geared 488 with a Spartan locker, sky toyota driveline flange, a super beefy steering arm from some vendor on pirate. I'm gonna make a drag link with 7/8 Ruff Stuff heims and just run it with low steer for the moment until I get another arm and make a tie rod.

Nice little pile of parts on deck just waiting on my back to feel better.

95toyrunner · « **Reply #7 on:** Aug 11, 2012, 07:23:58 AM »

Dude, I got to see your stuff at the shop! It's lookin good man.

locked 4x4 · « **Reply #8 on:** Aug 11, 2012, 08:54:02 AM »

Subscribed. Looks like fun.

yota_krawler · « **Reply #9 on:** Aug 11, 2012, 11:46:00 AM »

Nimyad · « **Reply #10 on:** Aug 11, 2012, 03:51:20 PM »

Sounds fun

86rustbucket · « **Reply #11 on:** Aug 28, 2012, 01:01:12 AM »

I finally got started on it. I will get more pics soon.

THK Matt · « **Reply #12 on:** Aug 28, 2012, 05:38:52 AM »

are you doing frame plates? jw..

95toyrunner · « **Reply #13 on:** Aug 28, 2012, 08:49:02 AM »

Quote from: THK Matt on Aug 28, 2012, 05:38:52 AM

are you doing frame plates? jw..

Yeah he is, but I didn't on my taco (I may regret it later). But honestly has anyone ever REALLY torn or broke their taco frame? Sure it's a thinner wall (barely) and c channel past the cab but has anyone actually had a problem or did everyone just start plating their taco frames because they THOUGHT something might happen?

chim · « **Reply #14 on:** Aug 28, 2012, 10:40:42 AM »

Nice! That will feel so much more comfortable than an 86... jealous!

THK Matt · « **Reply #15 on:** Aug 28, 2012, 11:15:34 AM »

Quote from: 95toyrunner on Aug 28, 2012, 08:49:02 AM

Yeah he is, but I didn't on my taco (I may regret it later). But honestly has anyone ever REALLY torn or broke their taco frame? Sure it's a thinner wall (barely) and c channel past the cab but has anyone actually had a problem or did everyone just start plating their taco frames because they THOUGHT something might happen?

Good point.

mudaddict · « **Reply #16 on:** Aug 28, 2012, 01:23:26 PM »

Quote from: 95toyrunner on Aug 28, 2012, 08:49:02 AM

Yeah he is, but I didn't on my taco (I may regret it later). But honestly has anyone ever REALLY torn or broke their taco frame? Sure it's a thinner wall (barely) and c channel past the cab but has anyone actually had a problem or did everyone just start plating their taco frames because they THOUGHT something might happen?

my cousin did on his tacoma the mount for the shock tower went backwards and made a big hole in the middle of the frame.

95toyrunner · « **Reply #17 on:** Aug 28, 2012, 02:30:42 PM »

What kind of shock towers did he have?

pumkin toy · « **Reply #18 on:** Aug 28, 2012, 05:05:01 PM »

looks like a cool build... subscribed

yotatough · « **Reply #19 on:** Aug 28, 2012, 05:08:40 PM »

Quote from: 86rustbucket on Aug 28, 2012, 01:01:12 AM

I finally got started on it. I will get more pics soon.

tease!!

mudaddict · « **Reply #20 on:** Aug 28, 2012, 08:46:03 PM »

Quote from: 95toyrunner on Aug 28, 2012, 02:30:42 PM

What kind of shock towers did he have?

i dont remember they were tube style though!

4-lo · « **Reply #21 on:** Aug 28, 2012, 08:46:41 PM »

Quote from: 95toyrunner on Aug 28, 2012, 08:49:02 AM

Yeah he is, but I didn't on my taco (I may regret it later). But honestly has anyone ever REALLY torn or broke their taco frame? Sure it's a thinner wall (barely) and c channel past the cab but has anyone actually had a problem or did everyone just start plating their taco frames because they THOUGHT something might happen?

on the two taco that we built you can actually tell that the frame bented right between the cab and bed. maybe that is where its more weaken

95toyrunner · « **Reply #22 on:** Aug 29, 2012, 09:37:50 AM »

Quote from: 4xsports on Aug 28, 2012, 08:46:41 PM

on the two taco that we built you can actually tell that the frame bented right between the cab and bed. maybe that is where its more weaken

That's right where the taco frames change from fully boxed to being c channel. Has nothing to do with plating up front but yes it's very weak there in my opinion and I'll be boxing my frame there.

THK Matt · « **Reply #23 on:** Aug 29, 2012, 09:41:28 AM »

id save urself the headache later, and plate up front n back.

95toyrunner · « **Reply #24 on:** Aug 29, 2012, 09:45:25 AM »

Still waitin on that dang ruff stuff order!!

nisota · « **Reply #25 on:** Aug 29, 2012, 10:08:14 AM »

Cant wait to see more.

Shamb · « **Reply #26 on:** Aug 29, 2012, 11:36:41 AM »

what made you go with a D70 for the rear?

86rustbucket · « **Reply #27 on:** Aug 30, 2012, 01:06:12 AM »

Quote from: chim on Aug 28, 2012, 10:40:42 AM

Nice! That will feel so much more comfortable than an 86... jealous!

Thanks! I have kids and it will be nice to take more than one finally. I think it will be cool to be able to do a little more wheeling with the family in something safe and comfortable.

Quote from: Shamb on Aug 29, 2012, 11:36:41 AM

what made you go with a D70 for the rear?

I found the 60/70 combo on craigs list for $600 for the pair with factory 4.88s. It was some old man that was parting out an 81 dodge W350
I'm just crossing my fingers this 3rz will push these 39s up a hill with 4.88 gears.

Wainiha · « **Reply #28 on:** Aug 30, 2012, 01:30:09 AM »

you planning to shave that d70 housing?

THK Matt · « **Reply #29 on:** Aug 30, 2012, 05:33:36 AM »

Quote from: 86rustbucket on Aug 30, 2012, 01:06:12 AM

I found the 60/70 combo on craigs list for $600 for the pair with factory 4.88s. It was some old man that was parting out an 81 dodge W350
I'm just crossing my fingers this 3rz will push these 39s up a hill with 4.88 gears.

Score!! I think that 4cyl, will push those just fine.

86rustbucket [OP]

86rustbucket [OP]

86rustbucket [OP]

Related Topics