new mods for mcr11, what ya doing?

[STUBBYTOY]

Car seat in rear of cab, onboard air finished. Boat side and flat bottom






and new job so I can have money and holidays to get to the roundup

[4RunnerChevy]

My goal is to actually make it to MCR 11.  Hopefully i'll be able to trailer it.  I would like longs, and another spare third (my spare is no longer a spare),  as well as a new radiator.

[KA4x4Chick]

 I'd like to be able to steer.....maybe hydro assist first or both!!

I have had ARB in my other rigs
1st year with detroits F & R
I'm sold on front detroit, no need to flip the switch:)
my only mod for next year is....nothing, maybe get up there 1 day sooner:)
decide what rig to take? if I get my other rig

[seabass]

I steer fine
no hydro assist
waste of $$ & breaks parts
pulling hydro off my other rig & selling it:)

I'd like to be able to steer.....maybe hydro assist first or both!!

I have had ARB in my other rigs
1st year with detroits F & R
I'm sold on front detroit, no need to flip the switch:)
my only mod for next year is....nothing, maybe get up there 1 day sooner:)
decide what rig to take? if I get my other rig

[KA4x4Chick]

I steer fine with hubs unlocked pm me about hydro.....

I steer fine
no hydro assist
waste of $$ & breaks parts
pulling hydro off my other rig & selling it:)

[seabass]

i HAVEN'T PULLED THE HYDRO ASSIST OFF MY OTHER TRUCK YET, IT NEEDS TO STEER ENOUGH TO MOVE IT AROUND THE YARD.
LIKELY BE NEXT SPRING BEFORE i WORK ON THAT RIG...

I steer fine with hubs unlocked pm me about hydro.....

[KA4x4Chick]

No hurry just sayin

i HAVEN'T PULLED THE HYDRO ASSIST OFF MY OTHER TRUCK YET, IT NEEDS TO STEER ENOUGH TO MOVE IT AROUND THE YARD.
LIKELY BE NEXT SPRING BEFORE i WORK ON THAT RIG...

[seabass]

I'll try & rember you when it's sell time
shoot me a pm with hydro as title & then I might remember to look you up.

if I get anytime before winter I'll swap it out & sell box, lines & ram, cheap

No hurry just sayin

[bigarms23]

finsh exo cage (actually start one)
find spare ecu
start saving money

[daniresch]

Tube front and rear bumpers
diff breathers
annnd also change my oil...   

maybes:...
winch
4.7 in the rear case

adding to list

bob bed
38 14.5 17 km2
raceline monster 17x9.5 bead locks

maybe:
half doors

[LilChief87]

either couple ways itll go by that time if money allows 350 1tons and 40s and full cage with dauls and lockers and 4 link (highly doubt thatll happen that soon but only time will tell) or if im guna stay the more yota route longs, 5.29s, lockers front and rear, full exo, cb, duals with 4.70s in one or both, possibly link but doubt it and few other mods

[BLACKDOG]

Make it this time is top of the list

Need to:
fix hyrdo assist lines
bumpstops
front shocks
seal up t-cases

Want to:
4.3
move spool to the rear and get a locker for the front
flat belly
tubebed/exo
new seats
winch

[Rocksurfer]

I got a new rig. Maybe, just maybe after 11 years of saying I'd be there.

[Rocksurfer]

Here's my latest mod for MCR, it's a whole running truck (take that to the bank FCC)!

[SloCrawler]

MC07-R10
Aussie
Long's
Flatbelly
Timing chain

[83 Crawler]

1.30spline longs, with hub gears full marlin crawler rebuild, arp knuckle studs and arp hub studs Bow Down

2.put a yukon grizzly locker up front

3.duals with mc07 adapter and chromo 4.7s with long field output with front range off road crossmember, Driving (since 4x innovations don't sell there cross-member anymore :bull crap:)  get some driveline tech drives front and rear,

4put on my ifs rear axle with disk brakes

5. shorter shakels up front to lower my truck a little bit to match the rear,

6. 4xinnovations interior cage

7.get my motor rebuilt.

8.maybe get some 40in km2s if a have the money buy then,

9. http://www.mastercraftsafety.com/rubicon.php

ill add more as i think but i think thats a good list for now

[cdgvw1]

first off, I need to keep the small wild animals out of my yard so when I let my dog out at 5AM to get on the road, he doesn't kill another and make me have to be late and miss my group..  

Next, I need to finish:
my 4" all-pro rear spring install - done
finish tubbing my rear fender wells
install my MC 4.7's and front moly 30 spline output - done
finish my on board air
fix my guages    - done
pickup tail gate conversion
cut up some doors for halfies
rear spare tire mount
weld my drain plugs as I almost had an accident  
pack lighter so i can leave my sub in    

forgot to add:
bob the rear and paint it one color.

[cdgvw1]

Make it this time is top of the list

Need to:
fix hyrdo assist lines
bumpstops
front shocks
seal up t-cases

Want to:
4.3
move spool to the rear and get a locker for the front
flat belly
tubebed/exo
new seats
winch

Hey Jason, what happened to the hydro assist lines?

[83 Crawler]

529 Detroit front spool rear, long fields and hub years, w56 duals with 4.7 and flat belly ifs rear axle ifs hub swap up front

[BLACKDOG]

Someone didn't secure them well enough, and the line found a great spot to hang out between the bumpstop and the axle. 

Leaking like crazy, but it still holds pressure.  I just need to replace it.

[ssicoffroadshop]

Get there in my own rig this year  to Mark for useing his this year

[90 sa-yota]

Dam my list is small
1. New exhust bearing
2. Add more blinker fluid
hahahaha

[crazywb]

sas, second case. sliders, and bumpers then I should be good.

[*FFC*]

Just have rig trail worthy and safe with exo

Hah... not happening. The rig sits 'till the kid's in college haha! Ok, at least 'till she's out of diaper$$.

[Slolyfe]

Well not really doing this because of MCR but it should be done in the next month, and they are new mods.

Bobbed/sectioned/dovetailled bed.
New motor.
Propane.
Finish cage.
HID headlights.
Incab winch control.
Rebuild front axle.
New front springs.

She is getting there.

http://board.marlincrawler.com/index.php?topic=88045.0;highlight=rebirth

[Rockcrawlintoy]

redo cases, new arb seals, new rims and tires and a new starter. maybe a new rear end too we will see

[yota18]

need to install rear springs and truss the front axle. need too find someone in the ventura area to help with that i dont know how to weld.also put on backing plate eliminator. then i should be good.

[Gixxer Jon]

There isn't anything that I have to do, I can hit the trail "as is" but since my JD Squared model 32 bender came in yesterday I'm going to swap my bed and build my exo!  WhooHoo!
Lil sluice here I come! 

[86yoter]

well i have just started but have got the sas out of the way. also got grizzly in the rear with 529s and high pinion front with 529s.fixed overheating problem.

As for the list:

-make sure to sign up
-4.7s in one of these cases i have
-twin sticks
-4 cyl auto trans to gear driven t-case adaptor (OUCH!)
-front driveline
-rear driveline
-rock sliders
-rear bumper
-stickers
-and hopefully selectable front??? big hope
-diff armor which i already have
-half doors ....... already have doors just need sheet metal
-rear fender work?? since i will have some leftover sheet metal

Its a long list i know. i just started april.  and i am addicted.  see how much my out of work butt is able to afford or make... Its only money Right!!!!

[moutaintoys]

so how much does this run cost my rig ready to go