new mods for mcr11, what ya doing?

[BIGBIRD]

 hope to finially get my bucket seats in, possible boatside. and new floor, i mean a floor.

[SloCrawler]

Front locker, Bobby Longs, and dual cases, that's asking a lot though.

[87hillbillyoter]

duals, arb lockers f/r, gears, tires, armor, 30 sp. longs, fix my rear brakes, and driveshafts. and finish my engine swap

[IMMUDDY]

Passenger rear window.

[KA4x4Chick]

Sell Detroit in front and get another arb..cage....and rock lights then my life will be complete lol 

[rockin86runner]

turn runner into an ftoy

[*FFC*]

Just have rig trail worthy and safe with exo

[fordh8r]

E-locker rear, V6 locked 3rd in front, Possibly some new power under the hood  and well....I usually don't know any of this until at least July or August...so, we'll see what this list looks like by then. 

[91 ex-cab]

Corbeaus and 5 points, more tube on the roll cage, rebuild duals with Marlin 30 spline outputs, rear shocks. Oh and actually go this time  

[weakyota91]

im muddy- you said you needed a new window, did it break out coming up big sluice lol i seen a bunch of glass sittin on  a rock down there lol my extended cab was pretty tight around one of those corners

[MiniSimp]

Weld rear diff plug, convert to 4 seater.

[crazykooter]

E-locker rear, V6 locked 3rd in front, Possibly some new power under the hood  and well....I usually don't know any of this until at least July or August...so, we'll see what this list looks like by then. 

Hey Tom I know where you can get a rear E locker housing and shafts for 100 bucks.  The 3rd is gone tho.
Still worth it imo.  I can pull it for ya if you dont have the time.  Tho I dont even have enough gas to get there. Blah
Let me know.

My list for next year:
Fix some of my body damage
Rotate rear axle angle down
Get an ifs box and tap it to get hydro assist back
Get a 1650 psi PS pump
Make dual shackles for the rear

Thats bout it for next year.  My truck did well this year but I really need to get my steering fixed so I dont roll it like I did this year.

[superyota]

Get my ARP knuckle studs in
hammer out kicker panals on both driver and passenger side to clear 40s
trim out rear fenders a bit more
install new  hard mount motor and tcase mounts
I think I might have to vacuum out my truck and change the oil this year

[SloCrawler]

Get my ARP knuckle studs in
hammer out kicker panals on both driver and passenger side to clear 40s
trim out rear fenders a bit more
install new  hard mount motor and tcase mounts
I think I might have to vacuum out my truck and change the oil this year

How long has it been now 5 years?

[Wermz84]

Should I even say it?  
Lift it.  
Marlin 25mm pin upgrade
Diamond front/ with Bobby longs
86 rear housing with Poly performance shafts


also;
do some rewiring, get the winch control pannel in and the accessory fuse block from Painless in.
different rock lights
front off road lights (ridgid industries)
inverter
upgrade alternator
Try and fit my old Recaro Trophys in with 4pnt harness.  Also re-upholster them with molle and attach hydration pack to back.

some other stuff i cannot remember.


After all that I might still be on 31's.  because i won't be able to afford tires and bead lockers.  lol.

[brockbuilt85]

Three link rear
RUF
tires and wheels
Spare Tire Carrrier
Make soft top
change engine oil
trim fenders

[fordh8r]

Should I even say it? 
Lift it. 
Marlin 25mm pin upgrade
Diamond front/ with Bobby longs
86 rear housing with Poly performance shafts


also;
do some rewiring, get the winch control pannel in and the accessory fuse block from Painless in.
different rock lights
front off road lights (ridgid industries)
inverter
upgrade alternator
Try and fit my old Recaro Trophys in with 4pnt harness.  Also re-upholster them with molle and attach hydration pack to back.

some other stuff i cannot remember.


After all that I might still be on 31's.  because i won't be able to afford tires and bead lockers.  lol.

You had me at "lift it"... 

[Wermz84]

You had me at "lift it"... 

Awww    

change engine oil

That one sounds intense! 

[brockbuilt85]

That one sounds intense! 

yup, gonna need a work party for that one for sure

[fordh8r]

yup, gonna need a work party for that one for sure

Anytime you do internal engine work like that it requires fine skills and fine  ......I'm in! 

[fordh8r]

Hey Tom I know where you can get a rear E locker housing and shafts for 100 bucks.  The 3rd is gone tho.
Still worth it imo.  I can pull it for ya if you dont have the time.  Tho I dont even have enough gas to get there. Blah
Let me know.

Thanks, Josh!  The housing would be tempting...    But I already have an IFS rear end in my truck and was thinking just to modify it for the E-locker. I do already have the E-locker, just need to get the gears for it. I also have a V6 3rd for the front and need the gears and locker for it too. 

[brockbuilt85]

Anytime you do internal engine work like that it requires fine skills and fine  ......I'm in! 

haha, nice. i also need to fix my rear drain plug leak

[fordh8r]

haha, nice. i also need to fix my rear drain plug leak

Now yer gettin physical...that will require additional...     

[Rockcrawlintoy]

kinda depends on if i get hired here or not. Ill prolly do tons and links if not ill get some 37s for ir and wheel it the way it is.

[Gixxer Jon]

3rd 2.7 swap, exo, and ditch the rear buggy leafs and 4 link it!

[ajordan1975]

1. Make it to the round up from Texas!
2. Add a back seat and cage so I can bring the kids
3. Bigger tires
That's about it.... For now

[Wermz84]

1. Make it to the round up from Texas!

That would be cool if you could.

[freds40]

I think it's about time I finally get my A/C charged. The Waggin gets a bit toasty on the trail

[jcook]

im muddy- you said you needed a new window, did it break out coming up big sluice lol i seen a bunch of glass sittin on  a rock down there lol my extended cab was pretty tight around one of those corners

The glass was mine....   2010 jeep rubicon unlimited "missed it by that much" 
James

[jcook]

Already fixing rear hard top window....  so add heavier duty skids, (take top off next time) and add two way ham radio......
James