new mods for mcr11, what ya doing?

[bdcplayer_83yota]

NEED TO FINISH:
-duals with 4.7 gears...COMPLETED
-E-locker in rear/front
-longs in front
-cage start/hopefully finished or at least a front bumper
-BOB the bed since it's a long bed lol

[kiyul4130]

ordered some drive flanges a couple days ago. next is beadlocks and a full bearing rebuild kit for the front of my truck.

[<MIKE>]

Finally got my dual cases in. Next is new belly pan for duals and a rear locker. I'm still open open after 3 years lol.
and inner cage.

[bigarms23]

install cage
install rear hi9 diamond axle
install front 609 diamond if they are delivered before
replace gaskets in duals

[OOPS]

Same old junk as last year with a few new dents from the TB Jambo. May break down and wash it an clean the inside since my wife is supposed to go this year!!!!!!!

[kiyul4130]

Same old junk as last year with a few new dents from the TB Jambo. May break down and wash it an clean the inside since my wife is supposed to go this year!!!!!!!

what day you heading in???

[jerz4wd]

1) Install Tacobox
2) Install 3 link with Diamond axle laying in shop
3) new rear springs

Made date to take to shop in two weeks. Hope to make it this year!!

[mudaddict]

Solid axle swap for me

[kiyul4130]

Solid axle swap for me

what?? new rig or whole new front end?

[mudaddict]

what?? new rig or whole new front end?

  gonna be bringing my tacoma.

[kiyul4130]

  gonna be bringing my tacoma.

is hot pink still the color scheme of choice?

[jrock]

Not a mod... a new truck

[mudaddict]

is hot pink still the color scheme of choice?

haha no i thought about it though . havent picked a color just yet but at you know i like my bright!

[daniresch]

new transmission, my reverse is shot!

[Slolyfe]

Just picked up a longfield output.
Add a leaf back in  my packs.
french in the rear hangers.

[daniresch]

im finally all ready to go!!!

[kiyul4130]

still camped out here in TN. i just finished ordering the last of everything i really need. i got drive flanges, RCVs, a entire bearing rebuild kit for my front axle from the "C" out. bronze kingpin bushings, longfield UHMW bushings. everything is sitting in california waiting for me like christmas time. 3 weeks from today and ill be home. i have a hunch and want to order a marlin front output though......

[mudaddict]

well hurry up! but coming home to lots of parts is always a great time.


but on a side note my trucks done just need to fine tune everything. sending in reg on monday.

[fordh8r]

E-locker rear, V6 locked 3rd in front, Possibly some new power under the hood  and well....I usually don't know any of this until at least July or August...so, we'll see what this list looks like by then. 

Ok, so none of the above as I hoped by now...    BUT! I did get some other stuff done. Recently did a dual battery set up with automatic isolation. Now I can run 12v accessories and not have the worryof my truck not starting when we break camp and head out on Sunday.  I made some improvements in my sleeping accommodations as well and did some noise suppression and insulation in my cab. I'd say what else I may be up to but that would probably mean I may not get it done before then.   

[kiyul4130]

well hurry up! but coming home to lots of parts is always a great time.


but on a side note my trucks done just need to fine tune everything. sending in reg on monday.

just waiting on the clock now....

[BigMike]

Hoping to have my OBA done and rear disc brakes installed


Sent from my iPhone connected to the BigMike Network using Tapatalk

[mudaddict]

how long you been working on getting both of those done mike 

[BigMike]

For about a few hours

[mudaddict]

 

[toy4crawlin]

1. Most important--  Fix small Engine Leak
2. Longfield  birfield joint, rebuilding right side completely and adding ARP studs.
3.  Maybe a Spare tire carrier.
4. onboard shower for the girls
5. Full enclosed soft top
6. might tune my RC for the RC comp

never Used a spare in all my Rubicons and Fordyce along 10 years.  Never broke a birf on the Con or Fordyce either.

Funny story,  i rebuilt all the drive train except for the right knuckle and birfield, drove on it for years, knuckle started to leak some how drove from deer valley  run all the way home (3hrs) with hub locked, then wheeled in Hollister and jammed the right wheel in jungle gym and finally broke the birfield. It was definitely abused and I woke up knowing it was going to break with all the abuse it had been through.

[BigMike]

never Used a spare in all my Rubicons and Fordyce along 10 years.  Never broke a birf on the Con or Fordyce either.

Funny story,  i rebuilt all the drive train except for the right knuckle and birfield, drove on it for years, knuckle started to leak some how drove from deer valley  run all the way home (3hrs) with hub locked, then wheeled in Hollister and jammed the right wheel in jungle gym and finally broke the birfield. It was definitely abused and I woke up knowing it was going to break with all the abuse it had been through.

Sounds like your truck takes good care of you my friend

[kiyul4130]

All my parts are finally at home and waiting. 3 weeks till the trip.

[ascdub]

exo in the works crunch time

[ascdub]

whoops not mine

[crazywb]

SAS  with 62 front end,   check
Sliders,   check
Bumpers,   check
Rear suspension,  check
Drive lines,   check
build thread with split case and 62 rear end after the round up,   check

Left to do,  Bump stops, crossmember, inner cage.