Author Topic: My 84 extra cab is gone. Tacoma build now. (Read 504864 times)

THK Matt · « **Reply #2430 on:** Jul 10, 2008, 08:44:53 PM »

damn man, you took on a big project on a budget.... oh well slow and steady... that thing will be pimp!

Hyena · « **Reply #2431 on:** Jul 10, 2008, 08:46:21 PM »

thought i could sell my yota axles and then buy most of the big stuff at first, then work off the little stuff later. I was wrong! lol

THK Matt · « **Reply #2432 on:** Jul 10, 2008, 08:47:17 PM »

Quote from: Hyena on Jul 10, 2008, 08:46:21 PM

thought i could sell my yota axles and then buy most of the big stuff at first, then work off the little stuff later. I was wrong! lol

nothing ever works out as planned. thats the pleasure of custom work.

Doof · « **Reply #2433 on:** Jul 10, 2008, 08:57:14 PM »

what did you get with the axle money?

Hyena · « **Reply #2434 on:** Jul 10, 2008, 09:00:41 PM »

front and rear axles, gears, spools, link parts and an air compressor. also 2 new tires for my ford. not sure what else.

Doof · « **Reply #2435 on:** Jul 10, 2008, 09:01:54 PM »

that a good list right there

Hyena · « **Reply #2436 on:** Jul 10, 2008, 09:04:12 PM »

ya i blew it pretty fast.

Doof · « **Reply #2437 on:** Jul 10, 2008, 09:05:06 PM »

when you build a rig, its pretty easy to blow 2 g's in a few minutes if you have the

ready to go

kiyul4130 · « **Reply #2438 on:** Jul 11, 2008, 01:07:27 PM »

yep gunna blow like $3500 in 5 seconds...

kiyul4130 · « **Reply #2439 on:** Jul 25, 2008, 09:49:18 PM »

yep, runnin out of money. i blew that fast. didnt go very far lol! time to sell some

.

kiyul4130 · « **Reply #2440 on:** Jul 25, 2008, 09:53:22 PM »

Quote from: Hyena on Jul 10, 2008, 08:39:05 PM

no, i have the two biggest thing to buy, coil overs and front axle shafts. not to mention longfield u-joints, rotors, hubs, calipers and brackets.

dude, DONT buy shafts. make it to the round up. callens been flogging his 60 with stock shafts on 42s and its been fine. i know you dont want to short cut it but wheel it then get some shafts afterwords. make it to the round up this year, its going to be floppin' sick! those shafts will laugh at your 40s for awhile.

Doof · « **Reply #2441 on:** Jul 25, 2008, 11:49:15 PM »

he does state a good point

60 stock shafts will hold up to DDDD's for one run

kiyul4130 · « **Reply #2442 on:** Jul 26, 2008, 04:54:57 AM »

.........many runs brad...flopp. lets wheel.

toybuilt · « **Reply #2443 on:** Jul 26, 2008, 10:14:26 PM »

60's are so cool 8)

Hyena · « **Reply #2444 on:** Jul 27, 2008, 02:25:38 PM »

no, i would have to buy new u-joint for the shafts anyway since the ones i have are crap. i have seen a front stock 60 snap pretty easily with 40's before, i know callens been running his pretty hard but i just don't trust them. and either way i won't make it to the round-up with this truck, shocks aren't going to be present for awhile either.

Doof · « **Reply #2445 on:** Jul 27, 2008, 05:40:24 PM »

o well... the shake down run is going to be sick as

norcal-kid · « **Reply #2446 on:** Jul 27, 2008, 09:16:53 PM »

hey brad... just wait...

kiyul4130 · « **Reply #2447 on:** Aug 01, 2008, 04:41:51 AM »

MiniSimp · « **Reply #2448 on:** Aug 01, 2008, 06:34:08 AM »

Any updates Brad?

Hyena · « **Reply #2449 on:** Aug 01, 2008, 06:13:17 PM »

it's going nowhere!

Doof · « **Reply #2450 on:** Aug 01, 2008, 06:51:11 PM »

haha

(greenly from boondock saints)

its going floppin' NO-whare

(end of greenly)

Duffil · « **Reply #2451 on:** Aug 01, 2008, 08:21:35 PM »

I just watched that again last nite.

Hyena · « **Reply #2452 on:** Aug 03, 2008, 07:24:24 PM »

spent way too much money this weekend on alcohol and girls.

4DEES · « **Reply #2453 on:** Aug 03, 2008, 10:24:29 PM »

Quote from: Hyena on Aug 03, 2008, 07:24:24 PM

spent way too much money this weekend on alcohol and girls.

Girls??

kiyul4130 · « **Reply #2454 on:** Aug 04, 2008, 02:06:58 AM »

Quote from: Hyena on Aug 03, 2008, 07:24:24 PM

spent way too much money this weekend on alcohol and girls.

tell me about it. its so easy to do.

Hyena · « **Reply #2455 on:** Aug 04, 2008, 05:07:29 PM »

and no i didn't spend money on strippers!

Doof · « **Reply #2456 on:** Aug 04, 2008, 05:46:41 PM »

strippers are last year... this year its the hookers

you dont pay a hooker for sex, you pay the hooker the leave after the sex... its a pimp decision.

-kat williams

kiyul4130 · « **Reply #2457 on:** Aug 07, 2008, 11:44:22 PM »

Quote from: Hyena on Jan 07, 2008, 10:13:17 PM

The start of my diff cover.

just going back a ways in your build. i liked how you did your cover. i wanted to break it like the way you did but just did the mohawk instead down the front where the ring gear would be and then based everything else off that. they look the same all welded/grinded. i still have all my templates that are clean. i was thinking of doing a passing it along thing online for making covers. just a thought, anyways......

gotrocks · « **Reply #2458 on:** Aug 08, 2008, 09:40:19 AM »

I wouldn't mind having a copy of the design. I might built one someday.

Hyena · « **Reply #2459 on:** Aug 10, 2008, 08:52:22 PM »

they are super easy to build. the problem is getting them to stay flat. mine warped a little since i welded it inside and out also. before i put it on i had it machined flat. yours turned out pretty good kiyul!

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Hyena [OP]

Related Topics