Colorado For Sale, Want to buy, want to trade thread

[Volcom]

I've seen their ad on CL and I dig the bumpers but $425 seems a bit much to spend on my POS.  But maybe that's the going rate?

I've got access to a tubing bender, welder, and plasma cutter and I still bought a bumper from Addicited.  I like the way they look and fit.  The approach angle is great considering it holds a winch.

[PhantomD aka Zach]

IF MY PRICE IS WAY HIGH TELL ME!

LOCATED IN BROOMFIELD!



hood off 88 4-runner SR5 $40


1st gen 4-runner grill $20


front bumper 94 Toyota p-up SR5 $35 (I have the parking lights too)


-Zach

[wakkjobb]

Random stuff in Colorado Springs, CO. Make offer, do it to it:

2 2nd gen front marker housings, chrome, have some funky bulb socket business-not factory sockets
1 1gen 4Runner tail light lens, lens only no housing, crack in reverse lens part, otherwise good shape, for left side
lotsa lotsa lotsa switches
2 door control relays
2 window control relays
1 sunroof latch
wiper motor
speedmoeter cable, 84" long
ash trays front and rear
rear heater bezel/trim piece for 1gen 4Runner
Make offer or will trade it all for W56 or top-shift case ( )

pics here:

http://s61.photobucket.com/albums/h57/trialsindan/for%20sale/

>>Dan

[Okiyota]

***

[uglyota]

anybody have or know where to find parts for a Warn M8000?

the cover piece on my motor is cracked and it looks like they only sell the motor as a unit.  Works fine but I imagine that'll be temporary if it keeps raining.  This is the style that has a cap-style cover on the motor (not the plate style)

got all kinds of good stuff to trade

[Volcom]

anybody have or know where to find parts for a Warn M8000?

the cover piece on my motor is cracked and it looks like they only sell the motor as a unit.  Works fine but I imagine that'll be temporary if it keeps raining.  This is the style that has a cap-style cover on the motor (not the plate style)

got all kinds of good stuff to trade

Any way to JB weld the crack to keep the water out?

[uglyota]

I could probably just duck it but figured I'd at least try to do it right 

[Quick Draw]

GONE

[boggerunner]

front range off road high steer with either flat or standerd pitman arm,  steering arms have 5th stud setup.
the tie rod end boots are ripped.  $200 plus shipping

[66cobra]

I have 5:29 gears with arb"s and would like to trade someone with 4:88 with arb's straight across both front and rear yours must be in good condition as are mine.I switched motors and have too much gear now i'm in loveland mine are 85 22re

[COToy91]

I have 4.88's with a arb high pinion front and a v6 detroit rear, interested?

[dezrik]

I have a 4.88 ARB Front Ill trade for your 5.29 ARB. Im in California though I could pay the shipping!

[66cobra]

thanks i'll keep both offers in mind but i would perfer a like for like exchange i'm not interested in the detroit though too sketchy in the winter but the high p. would be nice if i can't find someone to exchange both would you be interested in xchanging that for my front? i would be willing to throw in a couple of $ for it hey dezrik if he is willing to xchange that front i'll work with you if yours isn't a high p

[wakkjobb]

*!*

[Tyler82toy]

anyone got some tan bucket seats in good shape im in colorado springs

[motormouth559]

my pops got a fresh 84-85 22r long block bored 30 over 0 miles on it new pistons rings oil pump whole works asking $1000.oo obo I'm located in Clovis ca but his shop is in Fort Collins Co off timberline and prospect pm me for his number or call me @559-977-3756 thanks

[COToy91]

my pops got a fresh 84-85 22r long block bored 30 over 0 miles on it new pistons rings oil pump whole works asking $1000.oo obo I'm located in Clovis ca but his shop is in Fort Collins Co off timberline and prospect pm me for his number or call me @559-977-3756 thanks

Calling Dan, Calling Dan-your new motor is waiting! convert to 'pane and you done

[wakkjobb]

...yeah but I don't have the $$$ now plus that 94 4Runner is running and driving; somkes a bit and lacks power but they all do with the auto trannies. And cow-town might be too far for $1000; what exactly is the "whole works"? Forged internals ready for my 20psi of boost? Roller tip rockers? double row timing chain? Bored/honed/magnafluxed/hot-tanked? Details! Everyone wants details on the interwebs!

I  been 
>>Dan

[COToy91]

...yeah but I don't have the $$$ now plus that 94 4Runner is running and driving; somkes a bit and lacks power but they all do with the auto trannies. And cow-town might be too far for $1000; what exactly is the "whole works"? Forged internals ready for my 20psi of boost? Roller tip rockers? double row timing chain? Bored/honed/magnafluxed/hot-tanked? Details! Everyone wants details on the interwebs!

I  been 
>>Dan

I go from greeley to castle rock all the time, so I could transport it for you. And I got rid of the 93 runner with a 3.0 and auto I had because it was soooooooo slow. Now I have a 92 with a 3.4 and a manual sooooo fast and gets bomb mileage for a 4x4

[Okiyota]

First tranny is a Marlin Crawler built L52HD.  I have never driven with it, but it is used.  I pulled it from a truck that a guy was parting out, ended up using an R151F in my project instead.  Have not torn it apart, but it does shift in and out of all gears just fine.  It does have a sloppy shift handle, probably just needs a new shift collar/shift seat from Marlin ($10 in parts).  These cost $1445 without a core new.

$500



Second tranny is the factory L52 that came out of my 82 Pickup.  Its dirty, but works great, was my daily driver for 3yrs without any issues. 

TCase is also from the 82, it is still bolted to the tranny and works perfect.  It actually feels and shift very good, nice and tight with no slop!

Tranny - $100
TCase - $150
Both - $250

[brafmaster]

I have a great Toyota differential thats 8in high pinion open with 4.10 gears like new condition please call 970-690-7815 Thanks

I also have 8in front and rear toyota pickup axles complete. The front is from and 85 with 5.89 and a Detriot locker with Marlin Hysteer and axle shafts just been rebuilt and wheel spacers with Trail Gear truss and diff cover, the rear is a 93 with 5.89s and a detriot locker and has new axle bearing and brakes with Trail Gear Diff cover. $1000 Obo for both complete

I also do custom tube work bumpers and rollcages and welding.

[Quick Draw]

I have a 1980 20R Engine and a 5 speed L52 trans.  I'm not sure on the mileage.  The engine has a Weber downdraft electric choke carburetor, and a Pacesetter header on it.  It has good compression, and runs great.  The shifter on the transmission is a little sloppy, but otherwise runs through gears just fine.  I'm just selling because I'm swapping in a 5VZFE.  I'm asking $300 for the complete motor with all accessories, hoses, belts, etc. and $75 for the transmission.  Or $350 for both.  I'm located west of Ft. Collins, but can deliver within reason.

[COToy91]

I have a 1980 20R Engine and a 5 speed L52 trans.  I'm not sure on the mileage.  The engine has a Weber downdraft electric choke carburetor, and a Pacesetter header on it.  It has good compression, and runs great.  The shifter on the transmission is a little sloppy, but otherwise runs through gears just fine.  I'm just selling because I'm swapping in a 5VZFE.  I'm asking $300 for the complete motor with all accessories, hoses, belts, etc. and $75 for the transmission.  Or $350 for both.  I'm located west of Ft. Collins, but can deliver within reason.

you should pm dan aka wakkjobb and see if he is interested

[mrdoug]

IF MY PRICE IS WAY HIGH TELL ME!

LOCATED IN BROOMFIELD!

I can be persuaded to ship the gauge cluster, otherwise no shipping

SR5 4-runner gauge cluster (from a 1988 4-runner 3.0L manual trans ~246k miles) - $60


-Zach

Do you still have this cluster?

[Russell_G]

All kinds of random stuff.

http://ttora.com/forum/showthread.php?t=165282

Call me, I dont make it to the CO part of marlin much.

[foxtrot89]

I want your fan, but can't login to ttora for some reason from work. might also be interested in the oba, do you  know how fast it fills?

[Russell_G]

Sent PM on here with my number. Im not sure how fast the oba fills. I got it in a parts rig and tested the compressors to make sure it all works. I also lowered prices on everything and added a steering wheel and a few other things.

[wakkjobb]

...

[Russell_G]

http://ttora.com/forum/showthread.php?t=165282

Random parts.
and
http://ttora.com/forum/showthread.php?t=166081

Compressors, jacks, fridges


Yes the shop and house are for sale too
http://ttora.com/forum/showthread.php?t=166087

[rockymtn89]

Wrapping up the build and have a few things to sell:

1.5" 6x5.5 wheel spacers (1 pair) brand new       $60.00
'89 4Runner Rear Driveshaft                             $40.00
'89 IFS Front Brake Calipers                             $20.00 each
'83 Mini Truck Knuckles                                   $15.00 each
'83 Mini Truck wheel hubs (not locking hubs)       $15.00 each
'89 W56B Tranny (needs rebuild, great for core)  $40.00
'89 4Runner dash vents of various types             $ 5.00 each
LC Engineering Billet Spark Plug Loom w/clips       $12.00

Smaller parts I will ship. Otherwise, I am often in the front range and will work out delivery when convenient. Parts located in Summit County. Thanks!