Author Topic: Colorado For Sale, Want to buy, want to trade thread (Read 83710 times)

santa cruz crawler · « **Reply #240 on:** Oct 27, 2011, 11:09:16 AM »

100 & 4:10 gears v6 diff sold to me from 4 runnerchevy
Can post a pick , I'm in indiana shipping is 40$ for the diff

COToy91 · « **Reply #241 on:** Nov 19, 2011, 06:19:54 PM »

Located in Denver, CO. I will ship via USPS flat rate boxes- except the shocks, they will ship UPS. Make offers if you think the price is to high. Thanks for looking.

-Bilstein 5100 10" Stroke Shocks (need new eye let bushings)- $100
-4x Innovations T-Case Mount- $45
-All-Pro Off Road T-Case E-Brake- SOLD
-4-Point Belts- SOLD
-Hunsaker Reclining Suspension Seats-$250 for the pair
-Bud Built single Case cross member- $175
-Challenger Diamond Plate Storage Box- L 35.5 in. x W 14.75 in. x H 15 in. - $130
-Marlin Crawler In-Cab Cage- $300

DSCN1657 by kins5402, on Flickr

DSCN1654 by kins5402, on Flickr

DSCN1655 by kins5402, on Flickr

DSCN1652 by kins5402, on Flickr

DSCN1651 by kins5402, on Flickr

DSCN1663 by kins5402, on Flickr

DSCN1662 by kins5402, on Flickr

DSCN1661 by kins5402, on Flickr

DSCN1658 by kins5402, on Flickr

DSCN1660 by kins5402, on Flickr

DSCN1659 by kins5402, on Flickr

DSCN1653 by kins5402, on Flickr

theslayer85 · « **Reply #242 on:** Nov 19, 2011, 10:38:43 PM »

-All-Pro Off Road T-Case E-Brake- $160

I am interested, are you up for any trades?

COToy91 · « **Reply #243 on:** Nov 19, 2011, 10:53:55 PM »

Quote from: theslayer85 on Nov 19, 2011, 10:38:43 PM

-All-Pro Off Road T-Case E-Brake- $160

I am interested, are you up for any trades?

What do you have

toytank · « **Reply #244 on:** Nov 21, 2011, 08:55:48 PM »

so im selling my runner check it out
http://westslope.craigslist.org/rvs/2714596010.html

Volcom · « **Reply #245 on:** Nov 22, 2011, 07:26:05 AM »

Quote from: toytank on Nov 21, 2011, 08:55:48 PM

so im selling my runner check it out
http://westslope.craigslist.org/rvs/2714596010.html

I'm going to miss seeing your 4Runner buggy around. That thing rocks!!

toytank · « **Reply #246 on:** Nov 22, 2011, 11:29:54 AM »

me too. im really not trying to hard to sell it lol its just so exspensive building the buggy from scratch. everything i own is toyota and the new buggy cant use anything i have.

theslayer85 · « **Reply #247 on:** Nov 24, 2011, 10:00:53 AM »

Quote from: COToy91 on Nov 19, 2011, 10:53:55 PM

What do you have

I have wheels, bumpers, motor parts, some extra on board air stuff, limited body parts but some, half doors, full doors. Is there anything you are looking for?

scheefdog · « **Reply #248 on:** Nov 29, 2011, 11:04:26 AM »

Still trying to get rid of these parts off my 79-
Complete rear axle with 4.37 third, have matching 4.37 front third to go with- $150
Complete stock steering setup including manual steering box- $50
Stock front leaf springs(with shackles and u-bolt plates)- $20
Stock rear leaf springs(with shackles)- $40

Willing to trade for a stock 22r carb or weber 32/36, 84-85 front driveshaft, 84-88 rear driveshaft(sb or 4runner), single t-case cross member(bud-built type)

wakkjobb · « **Reply #249 on:** Nov 29, 2011, 07:46:53 PM »

^^^ where are you? I have a spare front and rear d-shaft; not 100% sure what they're from but I could use another set of rear springs to build up my RUFs.

>>Dan

scheefdog · « **Reply #250 on:** Nov 30, 2011, 07:14:32 AM »

Dan-
I'm in Gunnison, but have a friend who lives in the Springs so maybe we could arrange something. I'll measure what I need for rough driveshaft lengths (swapping to a newer trans) and let you know.

-Travis

rockymtn89 · « **Reply #251 on:** Dec 07, 2011, 08:47:03 PM »

Quote from: scheefdog on Nov 30, 2011, 07:14:32 AM

Dan-
I'm in Gunnison, but have a friend who lives in the Springs so maybe we could arrange something. I'll measure what I need for rough driveshaft lengths (swapping to a newer trans) and let you know.

-Travis

Hi Friend!

I might be able to bring the shafts over after Christmas if we come down. Just make sure those shafts are sparkly clean...don't want to mess up my purrfect interior. Oh, and yer never gonna sell that other crap. It's too OLD...

Rob

rockymtn89 · « **Reply #252 on:** Dec 07, 2011, 08:49:58 PM »

Quote from: theslayer85 on Nov 24, 2011, 10:00:53 AM

I have wheels, bumpers, motor parts, some extra on board air stuff, limited body parts but some, half doors, full doors. Is there anything you are looking for?

Slayer-

What do you have in the way of doors? I'm looking for a cheap set from a 1st gen 4Runner to cut up for half doors. Or, if they are already cut that would be ok, too. For some reason I've decided I need another winter project...

scheefdog · « **Reply #253 on:** Dec 08, 2011, 09:29:27 AM »

Quote from: wakkjobb on Nov 29, 2011, 07:46:53 PM

^^^ where are you? I have a spare front and rear d-shaft; not 100% sure what they're from but I could use another set of rear springs to build up my RUFs.

>>Dan

Dan-
Just measured my driveshafts and I'm looking for-
-rear that is about 44" collapsed
-front that is about 25" collapsed (preferably 84-85 because it has more flex)
I'm hoping for a 4x60mm pattern on the flanges to match my diffs since I already drilled them out once(to the rectangular 79-83 pattern)

Rob-
I'll buy you a big roll of saran wrap so your purrfect interior doesn't get greasy... and isn't your rig too nice to have half doors? Don't want any dust blowing inside after all....

wakkjobb · « **Reply #254 on:** Dec 08, 2011, 12:54:29 PM »

The front is 25" collapsed but has 70x70 diff side and 70x78 t-case side flanges...

the rear is 45" collapsed with 70x70 pattern at both ends...

I have 2 other U-joints boh 70x70 and 3 flanges; 2 are 70x70 and one is dual pattern... 70x70 and 73x66. I don't know what they're for, they came with the truck as spare parts and have remained that way.

It all kinda works...

>>Dan

scheefdog · « **Reply #255 on:** Dec 08, 2011, 04:25:55 PM »

Quote from: wakkjobb on Dec 08, 2011, 12:54:29 PM

The front is 25" collapsed but has 70x70 diff side and 70x78 t-case side flanges...

the rear is 45" collapsed with 70x70 pattern at both ends...

I have 2 other U-joints boh 70x70 and 3 flanges; 2 are 70x70 and one is dual pattern... 70x70 and 73x66. I don't know what they're for, they came with the truck as spare parts and have remained that way.

It all kinda works...

>>Dan

Edit; I actually want a rear that is about 44" collapsed (48" is what I have now), so your 45" probably would work. I will double check my flange hole patterns tomorrow. I'm running an elocker rear diff and an 86 front diff and I'm pretty sure they are both 60x60 which I think is the most common over the years. You are measuring the holes center to center right? Are the splines nice and tight on both of the shafts you have? I bought a front ds not long ago and the spline has noticeable play which causes vibration at certain speeds

wakkjobb · « **Reply #256 on:** Dec 09, 2011, 07:39:49 PM »

I measured the bolt holes at their outer edges, I thought 70x70 looked "odd" to be a Toyota pattern. I used the front shaft on my rig and it works fine; I eventually switched to a square shaft and kept this around as a spare. The rear shaft came with the truck, I haven't used it but the joints feel good; no binding/tight spots. Also just kept it for a spare, but I have a CV rear shaft and have moved the axle so this is now too short for my truck.

>>Dan

theslayer85 · « **Reply #257 on:** Dec 11, 2011, 02:17:42 PM »

Quote from: rockymtn89 on Dec 07, 2011, 08:49:58 PM

Slayer-

What do you have in the way of doors? I'm looking for a cheap set from a 1st gen 4Runner to cut up for half doors. Or, if they are already cut that would be ok, too. For some reason I've decided I need another winter project...

I have a set of complet doors that are not tuched. I also have a set of half doors I don't really like and would get rid of. I can text you a picture if that works. I will pm you my number.

4x4yota · « **Reply #258 on:** Dec 20, 2011, 10:18:24 AM »

anybody have a spare 84+ differential drive flange?

wakkjobb · « **Reply #259 on:** Dec 20, 2011, 04:45:25 PM »

Crap I just sent my spares to Gunnison... what bolt pattern do you need, I may be at the yard this week or next.

Zs Confederate Toy · « **Reply #260 on:** Dec 20, 2011, 04:47:11 PM »

I may have one. I would have to look out in the runner

Edit: I lied. I got nothin

4x4yota · « **Reply #261 on:** Dec 20, 2011, 06:43:40 PM »

Quote from: wakkjobb on Dec 20, 2011, 04:45:25 PM

Crap I just sent my spares to Gunnison... what bolt pattern do you need, I may be at the yard this week or next.

I need a 84+ non CV 60mmx60mm... (rear 8" diff)

Zs Confederate Toy · « **Reply #262 on:** Jan 04, 2012, 05:35:11 PM »

WTB or WTT solid front axle. Need everything. Lookin to get in to one relatively decent.

Quick Draw · « **Reply #263 on:** Jan 04, 2012, 05:45:51 PM »

Looking for a flat pitman arm if anybody has one laying around.

4x4yota · « **Reply #264 on:** Jan 07, 2012, 12:08:38 PM »

trekker top just come pick it up and it yours... or I can meet/deliver if you pay for gas...

4x4yota · « **Reply #265 on:** Jan 10, 2012, 02:05:07 PM »

Im looking for some "stock" toyota leaf springs

90-94 rear 4wd pair

79-85 front 4wd pair

Im in La Veta CO

pm if you have anything or know where I can find some

Beast2588 · « **Reply #266 on:** Jan 10, 2012, 07:28:47 PM »

COToy91 do you still have the marlin cab cage??

boggerunner · « **Reply #267 on:** Jan 10, 2012, 07:40:33 PM »

2000 chevy 3500 express van with vortec 5.7/4l80 and a 14 bolt for $800, needs new timing chain.

1992 lexus sc400 needs electrical work, runs, but has 10 yr old fuel in it. $1200 obo

1997 chevy 2500 with vortec 5.7/4l80, needs motor work, body and interior is in bad shape too. $1100 obo
located in grand junction

theslayer85 · « **Reply #268 on:** Jan 15, 2012, 08:59:56 PM »

Quote from: Quick Draw on Jan 04, 2012, 05:45:51 PM

Looking for a flat pitman arm if anybody has one laying around.

I have the stock ones from an 85 and one off an 86 box I am using for my cross over steering. Will that work?

scheefdog · « **Reply #269 on:** Jan 16, 2012, 05:28:12 PM »

I have an L43 transmission and transfer case that are in working order(still installed) that I want to get rid because I've got a turbo tranny and transfer I'm swapping in.

$120 and you can come drive the truck to check them out before I pull them if you want.

Edit: The stuff below is gone...
I also have all this stuff, $50 and you can take it all-
Complete rear axle with 4.37 third, have matching 4.37 front third to go with-
Complete stock steering setup including manual steering box-
Stock front leaf springs(with shackles and u-bolt plates)-

Volcom [OP]

Related Topics