Colorado For Sale, Want to buy, want to trade thread

[coloradobasshead]

rockymtn89   is This for still for sale ?



((( Brand new 58" Marlin sliders, legs, and gusset kit, unwelded and ready to paint/install. $125 OBO. I can arrange shipping but would prefer pick-up/delivery. I go to Denver and the Western Slope frequently. ))))

[wakkjobb]

I am quitting the 20/22 game in pursuit of moar powah. Thusly I am selling all the 4-cyl stuff that resides in the shop; here's a run-down:
20R stuff
cleaned bare head, can include valves/keepers/springs etc
dizzy, carb (pending), intake, timing cover, dual row timing stuff, oil pan, oil pickup, misc brackets, pulleys, clutch fan, exhaust manifold, con rods, valve cover (pending)
MAKE OFFER ON ANYTHING!!!

22R stuff
cleaned early block---needs overbore, starter, alternator, carb, HAC, clutch fan, dizzy, igniter/coil, voltage regulator, oil pan, stainless/chrome header (pending), pistons, con rods, crank, fuel pump eccentric, valve cover, flywheel, rear engine plate thing

22RE stuff
reman'd Napa alternator, dizzy, plastic intake piping, misc relays/switches/ignition stuff

misc stuff
rear d-shaft, 44" collapsed, front CV shaft, 25" collapsed, IFS capilers, pass knuckle, empty carrier, spider gears

MAKE OFFER!!! I have paypal and will ship dang near anything anywhere 'cause I flat out need money for another engine. Zip is 80918.

>>Dan

EDIT: igniter/coils sold

[rockymtn89]

rockymtn89   is This for still for sale ?



((( Brand new 58" Marlin sliders, legs, and gusset kit, unwelded and ready to paint/install. $125 OBO. I can arrange shipping but would prefer pick-up/delivery. I go to Denver and the Western Slope frequently. ))))

Sorry I didn't get back with you sooner. The sliders are no longer for sale. Sorry.

[PhantomD aka Zach]

I need a high/low shift fork for a top shift t-case

here is a picture of what I need, JUST THE FORK, not the shaft or anything else, just the fork.



-Zach

[wakkjobb]

Might have one, will check this weekend.

[REG535]

Am looking for a front bumper cause I cannot afford a new one. For a 85x-cab. THanks

[wakkjobb]

The fork I have is not what you're looking for... sorry.

[Tyler82toy]

bunch of random toyota parts in colorado springs local pick up

2 throttle bodies one 87 with tps $15
one 93 no tps $10
upper and lower intake $20
22rte exhaust manifold $20
ct20 waste gate actuator $20
2 gray seats unknown what from $10 pair
intercooler dont know what from $20
82 k&n filter $15
also have a precision t3 garrett that needs seal for $200

[superyoat]

hey guys looking for a toyota solid front axle. I'm located in gypsum so the closer the better.

[4x4yota]

I got one in La Veta you can have if you come get it it just needs steering and a 3rd member

[4x4yota]

parts for sale
sky boomerang shackle w/hardware $50 (no spacers)
6" straight rear shackle w/hardware $40
door glass and tailgate glass 84-88 4runner $best offer$
85 4runner rear leaf springs $40
unicover topper $80
and other parts

[superyoat]

I got one in La Veta you can have if you come get it it just needs steering and a 3rd member

want a complete axle.

[Okiyota]

Sold...

[4x4yota]

want a complete axle.

just thought Id offer

[REG535]

I have a 22re Adjustable Cam Gear for $80 that is unused. From C&G Machine in Colorado Springs. Got off a wildyoats member.
Also still looking for a front bumper for a 85 toyota truck.

[theslayer85]

I have a 22re Adjustable Cam Gear for $80 that is unused. From C&G Machine in Colorado Springs. Got off a wildyoats member.
Also still looking for a front bumper for a 85 toyota truck.

I have a couple of front bumpers.  I have a factory toyota one on my 4runner that I am going to get rid of soon it is not in perfect shape.  I also have two smitty build tube bumpers although I would have to check and see if they are rusted though.  I also have a bull bar type with a winch plate mount on it.  I can try and get pictures of what I have posted and see what you want.  Just let me know.

[REG535]

Ok send me some pics of the smitty in my pm box. am hoping maybe you have a different smitty tube bumper, there used to be a model that was called the defender that one could order...it has tube that goes up and down creating 3 like triangles. hard to explain lol.
also send me a pic of the bull bar type with winch plate
my stock one is bent on left, am not really looking to replace it with another, as i already try to bend it back to shape. Thanks

[Quick Draw]

I'm looking to trade a top shift gear drive case with 21 spline Marlin Crawler 4.7 gears for a stock case + cash. It has about 5k miles on it total. It was just torn down and inspected 1500 miles ago, and everything looked great. It doesn't have an interlock pin, so it's ready to go for twin sticks. This is perfect if you have dual stock cases to add even more gearing options. It would work great when used as a single case too.

Currently Marlin Crawler is selling these very same gears for $450...just for the gears. This will be a trade for FULLY ASSEMBLED transfer cases. A fully assembled case from MC goes for $775!

So I guess my price is your stock 2.28 top shift 21 spline gear drive case + $400. To me that sounds like a great deal for a quick gear down. I'm not exactly desperate to sell this thing and yank it out of the truck, so I'm not inclined to take low ball offers. But if you have one, let me hear it I guess.

This case worked awesome for me when I had a manual trans.  But now that I have an automatic, 4.7 x 2.28 is just too low.

[wakkjobb]

   Want! Broke! How soon are you inclined to do all this swap stuff?

[Zs Confederate Toy]

I am in the market for a set of super cheap doors that I can make half doors out of. My truck is a 2nd gen

[4x4yota]

any body got a 4.88 3rd member?

[Quick Draw]

  Want! Broke! How soon are you inclined to do all this swap stuff?

Well...I'm going to Moab probably first week of June.  It would be nice to have some cash for that...  So I would say up to like the end of May or something.

[wakkjobb]

I'll work on it... got that stock Runner-rust deal in the shop now; gonna get paid when it's done which should be by mid-end May.

[theslayer85]

I am in the market for a set of super cheap doors that I can make half doors out of. My truck is a 2nd gen

I have a set of half doors already made.  I didn't like them and am making a new set.  Or do you want to make your own?

[theslayer85]

Ok send me some pics of the smitty in my pm box. am hoping maybe you have a different smitty tube bumper, there used to be a model that was called the defender that one could order...it has tube that goes up and down creating 3 like triangles. hard to explain lol.
also send me a pic of the bull bar type with winch plate
my stock one is bent on left, am not really looking to replace it with another, as i already try to bend it back to shape. Thanks

Ok so i must be an idiot I cannot figure out how to send picturs through PM's.  Oh well.  the first picture is the rear bumper I got with the bull bar type.  The next one is the smitty built bumper.  I do have a matching rear bumper for this one too.  the last is the bull bar type bumper with the winch plate.

[foxtrot89]

  I have a set of half doors already made.  I didn't like them and am making a new set.  Or do you want to make your own?

pics?

[Zs Confederate Toy]

  I have a set of half doors already made.  I didn't like them and am making a new set.  Or do you want to make your own?

I was lookin to make a set of my own. I think I found a pair. THX though

[theslayer85]

pics?

These are the half doors.  They have been moved so many times that is why the paint is so rough.  I also used really crappy wal mart paint and it doesn't stick to good, which is why I am repainting the entire truck.  I started grinding the welds smooth and I patched the key hole.  Then I decided that I don't like the style and started a new set.  Let me know if you are interested or if anyone is. 

[foxtrot89]

would they fit on a first gen runner? also how much would you want for them?

[4x4yota]

I have a smitty built bumper for a 1st gen 4wd 79-83 has all 4 end caps and no rust but a does have a small ding

located in southern CO $150 obo

possible trade?