Colorado For Sale, Want to buy, want to trade thread

[Zs Confederate Toy]

I have a complete a/c unit out of my 87 pickup. Askin $125. It did work the last time I used it

[theslayer85]

would they fit on a first gen runner? also how much would you want for them?

That is what they came off of so they would fit.  price how about $50. 

[foxtrot89]

I'll take them. where do you live? I'm in the springs.

[theslayer85]

I'll take them. where do you live? I'm in the springs.

I live in Kiowa which is about an hour away from the springs.  It is roughly straight east of castlerock if you know where that is.  I will PM you my phone number I will be home this weekend and during the week I am done with work by 5 or 6.

[Quick Draw]

I'm looking to trade a top shift gear drive case with 21 spline Marlin Crawler 4.7 gears for a stock case + cash. It has about 5k miles on it total. It was just torn down and inspected 1500 miles ago, and everything looked great. It doesn't have an interlock pin, so it's ready to go for twin sticks. This is perfect if you have dual stock cases to add even more gearing options. It would work great when used as a single case too.

Currently Marlin Crawler is selling these very same gears for $450...just for the gears. This will be a trade for FULLY ASSEMBLED transfer cases. A fully assembled case from MC goes for $775!

So I guess my price is your stock 2.28 top shift 21 spline gear drive case + $400. To me that sounds like a great deal for a quick gear down. I'm not exactly desperate to sell this thing and yank it out of the truck, so I'm not inclined to take low ball offers. But if you have one, let me hear it I guess.

This case worked awesome for me when I had a manual trans.  But now that I have an automatic, 4.7 x 2.28 is just too low.

Still have this for sale...AND.... I need a locked 5.29 3rd ASAP.  Interested in trades, offers, whatever.

[Bigredwelder]

Looking for a 37" Blue Krawler for a spare.  Open to other brands also, but must be for a 17" wheel.  PM me with what you got and how much you want.  Thanks!

[PhantomD aka Zach]

FREE

Located in broomfield

hood off 88 4-runner SR5


1st gen 4-runner grill


front bumper 94 Toyota p-up SR5 (I think I have the parking lights too)

[GJToyotabug]

finally ready to get rid of the 22RE its for sale! 14,000 miles. when built I put a new forged crankshaft new pistons new valves, valve spring, new cam head and block were milled to 11:1 compression shorty header EGR block off. engine was always well taken care of, but run hard. the reason I've decided to retire it because it recently blew a head gasket.

Selling with 91 engine harness, ECU, full exhaust, Zoom kevlar clutch, and intake with K&N open filter.

Asking $250 OBO
Located in Grand Junction

[COToy91]

paging Dan

[wakkjobb]

Pass... that 3.4 has been giving me dirty looks. It wants to be istalled in something soon.

[GJToyotabug]

I know! The Lexus v8 gave me the middle finger to me the other day too! It's a strong little sucker for what it is. I know the bottom end is still good just offer head gasket and a quick resurface

[PhantomD aka Zach]

WANTED
Ignitor for 85 22re

Yoda man jim to the rescue!

[4x4yota]

I actually might have one of those ... Ill check thru my parts and get back to you

[wakkjobb]

My buddy is selling a set of tons; HP 60 front/kingpins:

http://denver.craigslist.org/pts/2476945819.html

I've driven the truck, it all works fine no noises/shakes/vibes etc.

>>Dan

[wakkjobb]

And I am looking for an L52 trans (w or w/o case) for another friend; his is garbage and slips outta neutral it's so worn out.  Lemme know; he'd like to get it sorted out before winter starts next month.

>>Dan

[theslayer85]

FREE

Located in broomfield

hood off 88 4-runner SR5


1st gen 4-runner grill


front bumper 94 Toyota p-up SR5 (I think I have the parking lights too)

I will take the 2 gen bumper.  Mine is all bent up. 

[superyoat]

hey guys I'm looking for a set stock rear toyota springs. could use a couple sets too if you got em'.

[boggerunner]

hey guys I'm looking for a set stock rear toyota springs. could use a couple sets too if you got em'.

location?

[Beast2588]

finally ready to get rid of the 22RE its for sale! 14,000 miles. when built I put a new forged crankshaft new pistons new valves, valve spring, new cam head and block were milled to 11:1 compression shorty header EGR block off. engine was always well taken care of, but run hard. the reason I've decided to retire it because it recently blew a head gasket.

Selling with 91 engine harness, ECU, full exhaust, Zoom kevlar clutch, and intake with K&N open filter.

Asking $250 OBO
Located in Grand Junction

Is this 22re still up for grabs

[superyoat]

location?

Gypsum, 81637

[GJToyotabug]

Is this 22re still up for grabs

Yes minus complete intake, $200 for the engine header exhaust Zoom clutch and engine harness and ECU. Also has Taylor 8.8 wires E3 plugs and MSD Coil.

[superyoat]

Gypsum, 81637

I'm in denver about every other weekend. and don't mind driving to pick some up if anybody has some springs

[REG535]

22re Adjustable Cam Gear from C&G Machine in Colorado Springs = $80.00 (Not used)

Trail Gear Knuckle Gussets = $20 (Not used)

Located in Cortez, CO

[wakkjobb]

parting out my 84; I'm keeping the axles/suspension/other bits but most all else is for sale; make offers. I just want it gone so I can start building something else.

craigslist ad:  http://cosprings.craigslist.org/pts/2496698177.html

Help me fund a 4Runner project!  
>>Dan

Edit: G52 is sold

flat bed hood grille/markers and pass. fender are sold

8/7: took pics of lots of stuff; come n get it!
http://s61.photobucket.com/albums/h57/trialsindan/for%20sale/

[wakkjobb]

also have a set of 15x8 steelies, D-hole design, gloss black, 3" BS asking $140/offer.

Edit: done been sold

[boggerunner]

stock set of 79-85 birfs and inner shafts $50
stock used 86-95 ifs cv shaft $20
stock ifs front drive shaft $30
forward shift t-case  $60
ifs rear axle shafts $20 each
3.0 ecu auto or 5 spd $10 each
all parts in grand junction
can bring with to the co yota jambo in 8 days

[toytank]

josh you have that motor still if so ill take it

[4x4yota]

decided to possibly sell my trekker top off my pick up and go a different route...
its in good shape and has the rear hatch but the plexi glass window is cracked in the lower right corner
asking $100 or trade for a bed tool box, rear bumper, or other posible items let me know

[toytank]

do you have pics of the topper and does it fit first gen long
bed

[4x4yota]

it fits my short bed perfect so Im going to say no it will not fit a longbed measures 60x74 (made for 1st gen short bed/trekker)