Colorado For Sale, Want to buy, want to trade thread

[foxtrot89]

dibs on the drive shaft. any problems with it? balanced?

[rockymtn89]

I assume you're talkin' to me...

The driveshaft came off of my stock '89 4Runner after doing the suspension, etc. It is balanced, has no rock rash, and is in great condition. No vibes before I took it off, so I'm guessing no vibes after!

[wakkjobb]

5xLT245/75R16 old school MTRs

sold

>>Dan

[COToy91]

tread depth on them?

[wakkjobb]

Plenty, ha ha. 

There's about 9 to 11/32nds on all 5; they come with 19/32nds new IIRC. They are the heavier 10-ply tires if I didn't mention that earlier.

>>Dan

[wakkjobb]

sold

[rockymtn89]

Brand new 58" Marlin sliders, legs, and gusset kit, unwelded and ready to paint/install. $125 OBO. I can arrange shipping but would prefer pick-up/delivery. I go to Denver and the Western Slope frequently. Thanks!

[Volcom]

Anybody have a decent 22RE or 3VZ V-6 radiator for sale?  Mine is on it's way out and was leaking a ton on the last run out to Penrose.

[boggerunner]

im looking for a 4.88 3rd 4 cyl or v6, stock or with a spool or welded, no elockers/arb's

[theslayer85]

I am looking for cross over steering set up.  I have an ifs steering box but i will need the mounts.  anyone got a set up laying around.  I have lots of stuff I can trade too.  A new set up is just a little spendy so I thought I would check here. 

[theslayer85]

im looking for a 4.88 3rd 4 cyl or v6, stock or with a spool or welded, no elockers/arb's

I know a guy who has a set up with 4.88 it is for an ifs truck, apparently the front third member is different in an ifs truck than in a solid axle, or i would have already got them from him.  If you are interested, and he still has them, I can his info and get them swapped so you can work out a deal. 

[boggerunner]

nope, dont need ifs junk, just 4 cyl 8" 3rd or v6 stuff

[wakkjobb]

Yes you do; it's worth some for scrap... 

>>Dan

[wakkjobb]

bumper sold

>>Dan

[wakkjobb]

bumper sold
>>Dan

[Weekendwheeler83]

Looking for a stock 22r carb linkage in good shape. I need the part that mounts to the intake not the carb, with the half circle and the s shaped link. I need one that the bushings are still in good shape as mine are completely gone and is causing some binding with my linkage. Some person took all the carbs and linkages out of all the local junk yards

[wakkjobb]

I have one from a 79 20R, looks just like the one on my 84.

>>Dan

[cbr929]

i might have what your looking for.

Looking for a stock 22r carb linkage in good shape. I need the part that mounts to the intake not the carb, with the half circle and the s shaped link. I need one that the bushings are still in good shape as mine are completely gone and is causing some binding with my linkage. Some person took all the carbs and linkages out of all the local junk yards

[Weekendwheeler83]

Sweet cbr! Where abouts are you located and how much you want? Maybe i can trade something or just give you cash, ive got an LCE stock asin carb to k&n round air cleaner adaptor and filter setup laying around that i dont need, only has a few hundred miles on it. Does the linkage have the bushings in it still? Mine are gone and it lets the linkage flex and bind.

[cbr929]

do you know if one out of an 84 will work?

[GJToyotabug]

WANTED:
I'm looking for a R series 4cyl trans and t case. i would like them to be stock good condition but up for and offers.

[Quick Draw]

WANTED:

Looking for an alternator for a 3.4L.

[COToy91]

I have a 3.4L alternator from a 1997 if you are interested

[Quick Draw]

Damn it.  Haha just bought a new one today.  Wish I saw this before hand.

[COToy91]

Damn it.  Haha just bought a new one today.  Wish I saw this before hand.

Eh now you have a brand new one

[wakkjobb]

Front CV shaft from my 84, also rear shaft, two solid axle spindles, IFS calipers w/ decent pads, passenger side knuckle, open carrier w/spiders (no gears) and whatever else I can find collecting dust. Prices are OBO, installation available.
We finance E-1 and up!

Wait... no we don't.

$60 CV shaft
$40 rear shaft
$20 each spindles
$40 pass-side knuckle
$40 each IFS capliers
$10 carrier (again, no gears)

In Colorado Springs, shop is in Black Forest for installs... heated shop!
>>Dan
(7I9) 2O1 97I3 call/text/carrier pigeon

[4x4yota]

I got some parts to clear out
make offer

weber 32/26 (w/adapter plate for 20/22R)
81 front axle minus steering/3rd
misc leaf springs
unicover topper (short bed)
birfields (5 total)

[4x4yota]

anyone got some tan bucket seats in good shape im in colorado springs

I have some tan/brown bucket seats out of an 86 no rips/tears just a lil dirty from sitting

[GJ Yoder]

Got 84 P-up, looking for
Grill
Marker lights
Front Fenders
Fuel injection harness, un cut
Dash pad (tan?)

E-mail at [email protected]

[4x4yota]

Got 84 P-up, looking for
Grill
Marker lights
Front Fenders
Fuel injection harness, un cut
Dash pad (tan?)

E-mail at [email protected]

I got a grill off my old 84 in good condition
also have tail lights (DR/PA)
door glass (non vented)
rear cab slidding window
and 4runner rear lift glass (84-88)