Author Topic: Colorado For Sale, Want to buy, want to trade thread (Read 82973 times)

854RUN · « **Reply #30 on:** Feb 10, 2010, 08:07:23 AM »

i have a g58 (tranny+ t case) 100.00
4 15x9 beadlocks 32 bolt 250.00
stock rear 3rd with 4:30 gears and 4:30 gears for the front 200.00 for both
rear d-shaft from my old runner set up for dual cases (30% stronger tube that stock and not even a scratch on it) 150.00
front square d-shaft (set up for duals) 60.00
newer 22re rad... 25.00

dezrik · « **Reply #31 on:** Feb 10, 2010, 08:29:16 AM »

854Run, location?

854RUN · « **Reply #32 on:** Feb 10, 2010, 08:59:52 AM »

my bad in Castle Rock

Volcom · « **Reply #33 on:** Feb 10, 2010, 10:08:35 AM »

Quote from: 854RUN on Feb 10, 2010, 08:07:23 AM

4 15x9 beadlocks 32 bolt 250.00

What backspacing do they have? Any pics?

854RUN · « **Reply #34 on:** Feb 10, 2010, 10:51:16 AM »

here one pic: http://board.marlincrawler.com/index.php?action=dlattach;topic=54940.0;attach=107251;image
they are from ballistic fab

they are 3.5 or 3.75 bs (i will check that tonight)

COToy91 · « **Reply #35 on:** Feb 10, 2010, 10:57:41 AM »

Quote from: 854RUN on Feb 10, 2010, 10:51:16 AM

here one pic: http://board.marlincrawler.com/index.php?action=dlattach;topic=54940.0;attach=107251;image
they are from ballistic fab

they are 3.5 or 3.75 bs (i will check that tonight)

I relally wanted these for xmas, but couldnt swing it with the parents. Maybe when i get my tax return

854RUN · « **Reply #36 on:** Feb 10, 2010, 11:04:59 AM »

parents what do they know

lol

I also have 4 fj 17" wheels 4" bs 400.00

COToy91 · « **Reply #37 on:** Feb 10, 2010, 11:07:45 AM »

Quote from: 854RUN on Feb 10, 2010, 11:04:59 AM

parents what do they know lol

I also have 4 fj 17" wheels 4" bs 400.00

Better yet maybe i can convince the girlfriend lol. I am in the middle of a 3.4 swap anyways... I have not touched my truck in a while, only one seat in, no seat belts, and my new tcase mount, bump stops, and budbuilt xmember are just sitting lol

Volcom · « **Reply #38 on:** Feb 10, 2010, 12:21:36 PM »

Quote from: 854RUN on Feb 10, 2010, 10:51:16 AM

here one pic: http://board.marlincrawler.com/index.php?action=dlattach;topic=54940.0;attach=107251;image
they are from ballistic fab

they are 3.5 or 3.75 bs (i will check that tonight)

Thanks, I'm looking for something will alittle less BS (aka wider). Thanks for the info though!

dezrik · « **Reply #39 on:** Feb 10, 2010, 12:47:14 PM »

I may be interested in the beadlocks, Ill have to check the bs I have on the wheels Ive got on the yoter, If they work im interested.

VOLCOM You don't want to go any wider

Trying to self destruct ur yoter axles lol.

Volcom · « **Reply #40 on:** Feb 10, 2010, 02:21:49 PM »

Quote from: dezrik on Feb 10, 2010, 12:47:14 PM

VOLCOM You don't want to go any wider Trying to self destruct ur yoter axles lol.

Wider means not as tippy on the big rocks

Right now, I'm on 15x10's with 2.5" of backspacing & 1.5" spacers in the front. About as wide as you can make a stock solid axle! I have hit rocks with my front brake rotors, hahahahaha!

66cobra · « **Reply #41 on:** Feb 10, 2010, 05:31:19 PM »

did anyone buy that w56

wakkjobb · « **Reply #42 on:** Feb 11, 2010, 10:22:16 AM »

Axle done been parted n sold

>>Dan

Volcom · « **Reply #43 on:** Feb 11, 2010, 11:49:02 AM »

Quote from: 66cobra on Feb 10, 2010, 05:31:19 PM

did anyone buy that w56

I told ToxicToy that I'd hold it until the end of March. I'd really like to get rid of it. It's in the way in my garage. Are you interested if he backs out?

66cobra · « **Reply #44 on:** Feb 11, 2010, 03:55:04 PM »

no, i have one that is in my way too but didn't want to list it here if you still have it

Volcom · « **Reply #45 on:** Feb 11, 2010, 08:04:14 PM »

Quote from: 66cobra on Feb 11, 2010, 03:55:04 PM

no, i have one that is in my way too but didn't want to list it here if you still have it

I don't mind, post it up!

dezrik · « **Reply #46 on:** Feb 11, 2010, 08:30:31 PM »

4.37 diff, 130k miles on it

$100 + Shipping if your not local.

dezrik · « **Reply #47 on:** Feb 13, 2010, 06:17:12 PM »

Looking for a MC07 R10 or regular one, Any brand if its not a rotated one

66cobra · « **Reply #48 on:** Feb 14, 2010, 07:40:37 AM »

w56 unknown condition told that it was operable. i ran the tcase off of the combo and it is good.50$ i'm in the loveland area

wakkjobb · « **Reply #49 on:** Feb 14, 2010, 04:51:10 PM »

4.88 locked third

sold 3-5-10

>>Dan

COToy91 · « **Reply #50 on:** Feb 14, 2010, 07:37:26 PM »

what locker

wakkjobb · « **Reply #51 on:** Feb 14, 2010, 08:35:57 PM »

I don't know; some say Detroit and others say Auburn and another said limited slip. There aren't any markings...

boggerunner · « **Reply #52 on:** Feb 14, 2010, 09:15:47 PM »

it doesnt look like my supra limited slip, 4 cyl or v6 3rd?

wakkjobb · « **Reply #53 on:** Feb 19, 2010, 04:39:09 PM »

V6, may have a buyer for it... I hope.

wakkjobb · « **Reply #54 on:** Feb 19, 2010, 04:43:24 PM »

Aluminum Husky bed box; 60" wide 20" tall 22" deep (IIRC). Shiny diamond plate, oooh-aaah...
$250/offer in Colorado Springs or partial trade for top-shift case or W56 trans (or whatever goes behind a 3RZ).

>>Dan
(719)201 9713

horshu · « **Reply #55 on:** Feb 20, 2010, 02:45:13 PM »

i have an 89 runner 22re runs good 4x4 5spd AC PS new front body parts salvaged title. Scary! Runs and drive fine. I am moving to VA and don't want to move it. Would like to trade for yz 250 or similar but no smaller. Or cash, $1500 OBO. anyone? 720 301-4840 Dave- in Coal Creek Canyon/ Golden 80403

horshu · « **Reply #56 on:** Feb 20, 2010, 02:48:28 PM »

I can't get the pic up for some reason. Call me and i can maybe send it via e-mail or maybe you could guide my ignorant *** through the process. If no answer call 303 642-7108. I have a family so no calling late please. Before 8PM only. Thanks.

wakkjobb · « **Reply #57 on:** Feb 20, 2010, 08:27:31 PM »

IFS steering box, was welded to frame (not my fault). Unknown year, no pitman arm, no leaks. Worked fine, I'm going to hydro. $40 plus shipping from 80908.

>>Dan

cbr929 · « **Reply #58 on:** Feb 22, 2010, 07:03:26 PM »

i got a e-locker in the housing. i also have a set of birfields with inners. just make me a reasonable offer!!

Jakesteads · « **Reply #59 on:** Feb 22, 2010, 07:07:45 PM »

Volcom [OP]

Volcom [OP]

Volcom [OP]

Volcom [OP]

Volcom [OP]

Related Topics