Colorado For Sale, Want to buy, want to trade thread

[scheefdog]

I'm looking for an open 8" 3rd with 4.30 gears in good condition (or an elocker 3rd with 4.30). Located in Gunnison.

Edit: Found one.

[wakkjobb]

I found a pair of ProComp springs from my pile, unsure of the lift and they need bushings... $60/pair or offer?

[4x4yota]

any body got a carb for an 81 22R

[wakkjobb]

I do I do!!! It needs the HAC or just block off the vac ports; whatever floats your boat. Say... $20? It came from my 84's 22R so it was running when the engine died a horrible noisy death.


still have my sliders too...

[4x4yota]

I do I do!!! It needs the HAC or just block off the vac ports; whatever floats your boat. Say... $20? It came from my 84's 22R so it was running when the engine died a horrible noisy death.


still have my sliders too...

Ill take it not sure what the HAC is but Im sure I can rob it off my old carb, I just want a choke/complete carb before winter mines to jerry rigged... and I still want the sliders... but no job and starting school are killing me Im going to try and come up that way again soon

[wakkjobb]

HAC: High Altitude Compensation valve

From what I remember, it ties into the vac advance on the distro and advances/retards timing in relation to elevation. I had to pick through a buncha Yotas at the yard before I found one... go figure. The 18-series are way different from the 20/22 series for future reference.


HAC vac diagram (ignore red circle)
http://board.marlincrawler.com/index.php?action=dlattach;topic=78060.0;attach=128962;image

3 lines go to the carb and 1 goes to distro; that bottom one I didn't have... or the pregnant octopus of vac lines which usually lives by the battery.

>>Dan

[Zs Confederate Toy]

My buddy is getting a 81 pickup. Its got a 20r in it. Anyone interested in the engine? $200 OBO Does smoke but runs. Hes up in Thornton

[4x4yota]

Toyota 8" E-locker with brand new 4.88s and solid pinion spacer differential is taken apart and in the process of being gear but I ran out of funds. Need new pinion bearings carrier bearings still look good anf then just need assembled. asking $500

Also have an IFS rear housing to go with it already cut to fit with longer studs and all will include for extra $50

(WILL NOT SEPERATE)

located in southern CO south of pueblo...
Willing to meet/deliever if gas is paid and half in advance

[Zs Confederate Toy]

Damn I wish I had the money. Lookin for a elocker for the truck

[Quick Draw]

WTB:  Window regulator for a '79-'83 pickup with vent windows.  Let me know what you have!  I would go to a junkyard, but don't really have the time right now.

EDIT:  Found one!

[4x4yota]

WTB:  Window regulator for a '79-'83 pickup with vent windows.  Let me know what you have!  I would go to a junkyard, but don't really have the time right now.

Pass or Driver

[Quick Draw]

Driver.

[4x4yota]

damn I have a Pass

[Zs Confederate Toy]

My buddy might have one off of his 81 parts truck. I will let you know as soon as I know

[scheefdog]

Does anyone have a 80-83 front driveshaft that is in good condition they would get rid of?  

Edit: Found one. Thanks 4x4yota.

[wakkjobb]

I'll have to check to bolt pattern, but I have a stock front shaft sitting in my pile-o-parts; where are you?

>>Dan

edit: I see you are in Gunny; want to ship or take a daytrip to Co Springs?

[4x4yota]

I have a stock front drive shaft off my 81

[scheefdog]

Yes, I am located in Gunny (it was snowing here today!) and would rather just pay shipping if that works for you and can do paypal. I have the stock T-tase, so I'm looking for the rectangular driveshaft pattern(I think it was the same for 79-83).

[Zs Confederate Toy]

I got an auto tranny and chain driven t case out of an 88 4Runner. Auto hasnt got reverse. I dont even know what to ask or if anyone wants it. But its here

[scheefdog]

I have the complete rear axle off my 79 up for grabs, 4.37 3rd still installed and I have a matching 4.37 third out of the front to go with. Also have a complete stock steering setup with manual box and stock front leaf springs. Make an offer.

[COToy91]

Located in Castle Rock, CO

Speakers were $66 a piece new w/out the enclosures

Looking to get $100 for the package- feel free to make offers



$110 shipped or local pickup

[GJToyotabug]

Looking to trade my rear axle for ifs front. Rear axle is set up with 4.56 gears supra lsd spring under or over. Rear axle has seen over 100mph in the desert very stout! Im looking for a 4.56 ifs front diff to trade for. Pm me what you have.

[4x4yota]

anybody have there old 8" V6 4.10 ring and pinion? or even a 8" 4.10 V6 3rd

[Volcom]

anybody have there old 8" V6 4.10 ring and pinion? or even a 8" 4.10 V6 3rd

I've got a set of used 4cyl 4.10's that were pulled when I went to 5.29's.

[Zs Confederate Toy]

Complete 81 rear axle askin $250 OBO. I need to start savin up for the runner. Im up in Bailey

[4x4yota]

I've got a set of used 4cyl 4.10's that were pulled when I went to 5.29's.

Im looking for V6 gears to redo my e-locker

[Volcom]

Im looking for V6 gears to redo my e-locker

Re-read your post and yes, I can't read

Sorry about that.

[4x4yota]

no problem... lol I have those moments too...

[wakkjobb]

Hey Mike:

http://www.colorado4x4.org/vbb/showthread.php?t=189443

$30 for 4.10s shipped... get on it! 

[4x4yota]

Hey Mike:

http://www.colorado4x4.org/vbb/showthread.php?t=189443

$30 for 4.10s shipped... get on it! 

are you a member there? can you get his contact info for me please