Author Topic: Colorado For Sale, Want to buy, want to trade thread (Read 83013 times)

Russell_G · « **Reply #300 on:** Jun 10, 2012, 11:56:12 PM »

Elocker rear axle drum to drum.

Elocker, new motor last winter. 2 uses. TG spring perchs and shock tabs set up for stock locations. could all be cut off and moved. Shaved drain plug, half pipe cap on the diff. 5.29 yokon gears solid spacer. Diff and diff bearings have about 12k wheel bearings done last summer...Maybe 4k on em. Low range switch. Comes with a spare shafts and drum i had for a trail spare.

800obo
720-548-0082

REG535 · « **Reply #301 on:** Jun 11, 2012, 09:42:47 AM »

I have a 22re adjustable timing gear (pics are on the thread), I also have a mirror not sure which year from lowrange maybe 88?, and also have a york compressor off a 84 4runner, with all the bolts and bracket, just no hoses

If I can trade some of these items for some winged doors (85), blue interior (85), some blue seats (85), a hood for the 85, or good cond bed)

Zs Confederate Toy · « **Reply #302 on:** Jun 18, 2012, 01:10:16 PM »

I have a set of 4 tri spoke 16" rims with 265 75 rugged terrains. A little tread left. Askin $150 obo
http://denver.craigslist.org/pts/3073401110.html

OldGold3VZE · « **Reply #303 on:** Jun 18, 2012, 04:47:14 PM »

Tube work available in Loveland. Bumpers, sliders, tire carriers, whatever you need. If you have a shop and a welder, but no bender I'd be happy to bend the parts and send you on your way with them. PM for a phone number, and check my daily driver build thread for examples. -Eric.

OldGold3VZE · « **Reply #304 on:** Jun 25, 2012, 06:55:50 PM »

Just pulled this off the 4Runner. Still usable winch bumper with headlight protection and LED turn signal mounts. Marlin Board price $125. Weld on, and you will need to cut your grill to use a winch.

http://fortcollins.craigslist.org/pts/3101358534.html

Also, have a very rare 1st gen "Rear Seat Delete". This is a hinged platform that replaces the rear seats a 1st gen 4Runner, giving you more of an enclosed cargo truck. Plus, you can store stuff under it. $100, firm on that, oh, and it's black and in pretty good shape.

Zs Confederate Toy · « **Reply #305 on:** Jun 30, 2012, 12:28:02 PM »

91 IFS rear axle. Everything MINUS the third. $100 obo. Possible trade for 35 12.50 15 spare

cbr929 · « **Reply #306 on:** Jul 21, 2012, 09:07:26 AM »

I have a head with valve cover I need to get out of my garage. Also have a steering column and some other interior parts such as a blue complete dash.

Let me know if you can use any of them or what you might need and I can let you know if I have it.

boggerunner · « **Reply #307 on:** Jul 24, 2012, 03:47:23 PM »

Quote from: colorado 4runner on Jul 24, 2012, 10:01:47 AM

I am switching my automatic over to a manual. So I'm looking to buy a complete W-56 manual trans w/ dual case, or just the case. If you have anything I can use please pm me. I have cash! I'm located in Colorado Springs Co. but am willing to travel a little to get the stuff I need. Thanks Chris

got a r151/duals with a front range crossmember with skid plate for $1000

colorado 4runner · « **Reply #308 on:** Jul 24, 2012, 08:11:44 PM »

Quote from: boggerunner on Jul 24, 2012, 03:47:23 PM

got a r151/duals with a front range crossmember with skid plate for $1000

PM Sent

wakkjobb · « **Reply #309 on:** Aug 02, 2012, 06:26:16 PM »

Crap is now scrap... $I\'m Down$

Zs Confederate Toy · « **Reply #310 on:** Aug 05, 2012, 10:03:52 PM »

4.38 third $150 obo

COToy91 · « **Reply #311 on:** Sep 02, 2012, 08:21:33 PM »

$150- Castle Rock/ Denver- PM with offers

$125 a piece or $200 for the pair- Castle Rock/ Denver area

Collapsed Extended
Front- ~26 1/2" ~31"
Rear- ~44" ~47"

wakkjobb · « **Reply #312 on:** Oct 16, 2012, 06:56:01 PM »

All gone.

theslayer85 · « **Reply #313 on:** Oct 18, 2012, 03:42:11 PM »

Quote from: wakkjobb on Oct 16, 2012, 06:56:01 PM

Still have my 4Runner carcass here; if anyone wants ANYTHING let me know... I'm making plans to haul it off within the next week or so. Little parts, body parts, fuel tank (dented), anything. I'd rather stuff get used than thrown out.

Free for all, have at it.

How is the body? I am interested in a straight fairly rust free 4runner tub to swap onto a runner that was rolled. oh and what year?

wakkjobb · « **Reply #314 on:** Oct 18, 2012, 08:15:40 PM »

I think you texted today; it's rusted to crap... good for 40s and all that stuff.

>>Dan

PhantomD aka Zach · « **Reply #315 on:** Oct 26, 2012, 05:31:17 PM »

U-joints, and ball centering kit (for the .513 ball) $60

this is more then $80 in parts (ASKING $60!)

Here is what I have
Precision/Moog Ball Centering Kit (w/ seal!) for a .513 ball stud (retails $34)
TWO Precision/Moog U-Joints for the Double Cardan shaft (retails $19ea)
ONE Precision/Moog U-Joint for differential side (these are the most common toyota truck joints) (Retails $14)

If you need to re-build a double cardan shaft, these are the parts you need.

854RUN · « **Reply #316 on:** Nov 06, 2012, 03:58:37 PM »

Hey all i am selling my T100. i will be putting it up on C/L this weekend but thought i would let yall know first.
http://board.marlincrawler.com/index.php?topic=35174.0
Year:1997
Make:Toyota
Model:T100 x-cab sr5, 4x4,
Engine: TRD Supercharger, JBL headers, 5vze V6
Transmission: R151 5spd
Transfercase: dual 23splin cases, twin stick shifter on full case
Front axle: Chevy Dana 44 with 4.88 gears, hydro assist, 1ton steering links.
Rear axle: Toyota 8.4", lockright locker, 4.88 gears, chevy disc brakes.
Shocks: Bilstiens 14" dual front, 14" single rear.
Springs: Alcan 3" lift front, Alcan 5" lift rear.
Tires: Two sets of 37’s
Front drive shaft: 12" travel CV.
Rear drive shaft: stock with lowered center section.
Also comes with custom front bumper and 9000lb winch and topper
$5000
i will be listing it for 6k on C/L
SOLD

Quick Draw · « **Reply #317 on:** Nov 06, 2012, 05:57:20 PM »

Zs Confederate Toy · « **Reply #318 on:** Jun 25, 2013, 09:36:09 AM »

Got some 3rd Gen 4Runner doors for passenger side. Perfect for a set of trail doors. No interior panels. $50 each
Also have a transfer case from the same runner. Fits R150. Had 190k miles. $100
3.4 v6 cluster 190k miles. $100
Can text or call me at 303 396 8 five 53

scheefdog · « **Reply #319 on:** Sep 14, 2013, 08:12:58 AM »

Sad to sell, but I have other priorities right now and don't like to see this truck just sitting around. Curious to hear what you guys think I should ask for a selling price. Will post up on craigslist soon.

1979 Toyota Pickup

Was completely stock when I bought it a couple year ago and had a blown motor. Here is all the major work I have done and I'm probably forgetting some stuff:

Rebuilt 20/22r hybrid motor with 2,500k miles. All receipts from replacement parts. Runs really strong.
Weber carburetor currently installed - have a freshly re-built factory Aisin carb with adapter plates from LCE also. TG header.

Old man emu leaf springs all around, new bushings, and 5” shackles. U-bolt flip kits.

Trail gear high-steer with IFS steering box and frame plating.

Fully rebuilt front axle with new birfields. 4.30 differential out of newer Toyota. IFS vented rotor upgrade with new calipers.

IFS rear axle with 4.30 TRD electric elocker (needs to be wired up).

285/65R16 BFG All-Terrains in good shape on 02 Tacoma wheels (5 matching wheels and tires). 1.5” spacers in the front to match IFS width.

Brake master cylinder from newer Toyota with new braided brake lines.

Newer style alternator from 22RE with integrated regulator. New battery when engine was re-built.

Custom bumpers front and rear. Front has space for winch to mount as well as a receiver. Rear has a receiver mount.

Inside of cab has bedliner on the floor (cut-out rust and welded in new sheet metal in floor boards). Bucket seats out of late 90s Toyota.

Truck body has rust and dent spots, but is in good shape considering the age. Would look sharp with a little body work and new paint. The bed is in decent shape and not rusted thru like most.

Still has the original 4 speed transmission which is solid, but the linkage needs to be worked on because it likes to pop out of reverse under full load. Clutch and flywheel is in good shape. The driveshaft joints need to be rebuilt with new u-joints. d

Hoping to sell to someone who wants to keep restoring the truck to near original conditional and have a very capable trail rig, not someone who wants to chop it up.

Truck is currently located in Gunnison in a garage, I'm living in Golden so I will only meet someone if they are really serious. I can email pictures of all work I have done.

How much do you think it is worth?

yotapainter · « **Reply #320 on:** Jun 15, 2014, 11:42:02 AM »

hey guys got a inclinometer out of a 1st gen looking for 100 bucks if you can come pic it up, its in great shape with only a small crack in the cover plastic on the top

colorado 4runner · « **Reply #321 on:** Jun 19, 2014, 08:16:56 PM »

1985 Toyota 4runner:
Marlin crawler dual transfer with toyota r151
Winch xrc8
33' inch tires (5) good tread one brand new
Locked detroit front and spool rear
Rock sliders
MC rear bumper
Addicted front bumper
High lift jack
Does have some rock damage but runs and drives
$5500 obo

Related Topics