Author Topic: 94 Toy ext cab build: sold... Utah bound on august 8th (Read 77251 times)

89sastoyo · « **Reply #240 on:** May 03, 2010, 09:44:20 PM »

haha beer is always a good trade for something, but cash and beer is the best.

yota_krawler · « **Reply #241 on:** May 05, 2010, 11:16:34 PM »

i did a little work today, extended my ford shock tower, got my front bushings in, took my drive line off so i can make a square one, tightened all my shackle bolts and put nylocks on them all, did break line mounts, cut my ubolts down, got everything ready for front bump stops, and thats about it.

rear axle will be done this weekend, i started working again $I\'m Down$ lol It was nice to have a few weeks off but now its back to having no time for it..... more updates this weekend

ToYocRawleR · « **Reply #242 on:** May 06, 2010, 10:18:29 PM »

Hey cody when you get your sheeit done hit me up and we'll break that biatch in on a snow run!!

yota_krawler · « **Reply #243 on:** May 07, 2010, 09:03:55 PM »

workin on it tomorrow, i will update at the end of the day. I might be able to get it done!!!! for sure on sunday

86bobbedtoy · « **Reply #244 on:** May 07, 2010, 09:16:11 PM »

im down to go wheelin

yota_krawler · « **Reply #245 on:** May 10, 2010, 08:38:18 PM »

well didnt get it done, but all i have to burn the perches on, gear oil, blead the breaks and make a drive line. so maybe next weekend sunday the 23nd....

86bobbedtoy · « **Reply #246 on:** May 10, 2010, 08:44:39 PM »

im planin on rollin up to wheel sunday!

yota_krawler · « **Reply #247 on:** May 11, 2010, 03:41:51 PM »

so i got fired today. so now the truck is even lower on the list. probably wont wheel till summer and i find another job.

I am a certed welder so hopfully i can find something.

P-DiseToy24 · « **Reply #248 on:** May 11, 2010, 04:22:06 PM »

Move somewhere else......

Anywhere else and you'll have a job real fast.... Paradise isnt much for work especially welding.... you could be a minister a storage unit worker or work in a old folks home...hahahaha

But really man thats no good did they give you a reason?

yota_krawler · « **Reply #249 on:** May 11, 2010, 04:50:03 PM »

ya but it was a bull

reason. I needed out anyway. Im thinkin of oil rig work....

yota_krawler · « **Reply #250 on:** May 11, 2010, 04:50:39 PM »

and that is very true

pumkin toy · « **Reply #251 on:** May 11, 2010, 08:56:40 PM »

go be a pipe welder for an oil rig. My cousin works at a refinery in ND, he said they are hiring welders starting at 32/hr right now. I really need to get a cert for pipe welding

Travis H · « **Reply #252 on:** May 11, 2010, 09:31:40 PM »

Thats one helluva bummer. i saw your forsale thread and i was like WTF. hope you find work soon.

yota_krawler · « **Reply #253 on:** May 12, 2010, 02:38:14 PM »

Quote from: pumkin toy on May 11, 2010, 08:56:40 PM

go be a pipe welder for an oil rig. My cousin works at a refinery in ND, he said they are hiring welders starting at 32/hr right now. I really need to get a cert for pipe welding

i am certed in mig pipe 6g, sick pipe 6g, fluxcore 1" with backing bar, and tig fusion 5g

yota_krawler · « **Reply #254 on:** May 12, 2010, 02:39:05 PM »

Quote from: Honkey on May 11, 2010, 09:31:40 PM

Thats one helluva bummer. i saw your forsale thread and i was like WTF. hope you find work soon.

its just a feeler thread, i am tryin really hard to keep it but if it comes down to it then i will have to sell.

minicrawlin · « **Reply #255 on:** May 12, 2010, 03:06:10 PM »

ya man try hard to keep it if you can! always a wicked bummer to see. GL on the job search man!

yota_krawler · « **Reply #256 on:** May 12, 2010, 03:08:50 PM »

thanks, ya it sucks cause i just have a few loose ends to tie up and its done. i have been building it for a year now. I do not want to get rid of it.... thats for damn sure

minicrawlin · « **Reply #257 on:** May 12, 2010, 03:12:06 PM »

ya i've been there! you'll loose your ass and have to start over, always sucks!! Something will come up man,

usually works out for the best!

GONZO97 · « **Reply #258 on:** May 12, 2010, 03:39:09 PM »

sorry to hear about the job good luck man hope you dont have to sell her....

Quote from: minicrawlin on May 12, 2010, 03:12:06 PM

usually works out for the best!

X2

yota_krawler · « **Reply #259 on:** May 12, 2010, 04:07:15 PM »

it already has.... well is in the works atleast

Dingman. · « **Reply #260 on:** May 16, 2010, 11:54:54 AM »

Fawker is WIDE...
Better get some flaps ASAP!!!!!!!!!!!!!!!!!

Travis H · « **Reply #261 on:** May 16, 2010, 11:58:40 AM »

sweet, how does she drive? have you taken if wheelin yet?

Dingman. · « **Reply #262 on:** May 16, 2010, 12:57:45 PM »

^ of course we did you not notice the broken hub?

It is stable, i drove it around, rides pretty darn good.

IT IS WIDE THOUGH..I think it is going to be a problem driving on the road unfortunately
Definitly going to need some mud flaps, and maybe some fender flares.

Maybe he could get some flares and some strong magnets and have removable flares, idk

THK Matt · « **Reply #263 on:** May 16, 2010, 01:23:40 PM »

Quote from: Dingman. on May 16, 2010, 11:54:54 AM

Fawker is WIDE...
Better get some flaps ASAP!!!!!!!!!!!!!!!!!

SWISS MAN! fkn sick!

bigarms23 · « **Reply #264 on:** May 16, 2010, 01:35:38 PM »

run flaps and a 1/2inch flare you should be ok to run on the street

86bobbedtoy · « **Reply #265 on:** May 16, 2010, 04:33:20 PM »

GLAD TO SEE IT ROLLIN!

dk98 · « **Reply #266 on:** May 16, 2010, 06:29:56 PM »

nice to see it on the road

ToYocRawleR · « **Reply #267 on:** May 16, 2010, 10:32:13 PM »

Naaaaa Good deal!!

yota_krawler · « **Reply #268 on:** May 17, 2010, 01:54:00 PM »

started workin on the E-fan. I have to get some connectors i ran out. I there is a lot on the motor that needs attention. but i am super stoked to have it home.

Heath you need to come to my house and help me locate all the vaccum lines.

What is the timing supposed to be at? we have it at 10* but not sure its right.

P-DiseToy24 · « **Reply #269 on:** May 18, 2010, 01:08:45 PM »

flopp YA way to go man looks tight im gunna have to check it out when I come up in a couple weeks...... actually lets plan a trip to the woods... memorial day

I'll show you crawlers how to baja wheel hahah

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

Related Topics