Author Topic: 94 Toy ext cab build: sold... Utah bound on august 8th (Read 77265 times)

Dingman. · « **Reply #330 on:** Feb 23, 2011, 12:52:14 AM »

http://www.ncttora.com/fsm/

TNRabbit · « **Reply #331 on:** Feb 23, 2011, 03:57:15 AM »

Quote from: twistedtoy92 on Feb 22, 2011, 10:28:53 PM

try adjusting it first.

x2

Replace those crappy phillips head bolts with hex head bolts from your local Ace hardware or equivalent.

QUick & dirty TPS adjustment:
With the screws slightly loose, very gently turn the TPS until your idle DROPS. That's where you tighten it.

If that doesn't work, just buy one from Toyota & save yourself a lot of headaches. TOYOPARTSMAN on Yotatech has GREAT prices (Neunan Toyota Parts); his email is garys@toyotaofnewnan.com. They offer discounts for yotatech members, probably for M/C members as well. Can't hurt to ask.

yota_krawler · « **Reply #332 on:** Feb 27, 2011, 09:57:04 PM »

Got a new grille and headlights off of a 92 4runner. Not sure how I like it. Pics tomorrow

yota_krawler · « **Reply #333 on:** Mar 01, 2011, 02:29:45 PM »

Before
http://m401.photobucket.com/albumview/albums/yotakrawler21/79485b93.jpg.html?pbauth=1_uLEBonVPfaLdh1h3YMYz2XnWexrzi1oK%2FtHdDDzOUrnZ31tK576VMENfElaccYDPltI9D0eOk%2FZD8bfYVhqwxoKagF86BX%2F5fzyV27ogSqKb1j5nASlk52YIU3OClxR3mykOsuQxBDw2CQWFteX6l0SqGoHBrHltpSvMDeoEZIU%3D

After
http://m401.photobucket.com/albumview/albums/yotakrawler21/61d1a1c8.jpg.html?pbauth=1_uLEBonVPfaLdh1h3YMYz2XnWexrzi1oK%2FtHdDDzOUrnZ31tK576VMENfElaccYDPltI9D0eOk%2FZD8bfYVhqwxoKagF86BX%2F5fzyV27ogSqKb1j5nASlk52YIU3OClxR3mykOsuQxBDw2CQWFteX6l0SqGoHBrHltpSvMDeoEZIU%3D

chim · « **Reply #334 on:** Mar 01, 2011, 02:38:54 PM »

Its kinda hard to tell from the small pics.. but I like the "after" pic... looks clean

yota_krawler · « **Reply #335 on:** Mar 01, 2011, 04:46:40 PM »

I will re post when I get home and can use the computer and not my phone lol.

91 ex-cab · « **Reply #336 on:** Mar 01, 2011, 06:09:17 PM »

I have the same grill on my truck, I didn't like it at first but it looks good with my bumper, so it's kinda growing on me.

91 ex-cab · « **Reply #337 on:** Mar 01, 2011, 06:38:10 PM »

Quote from: yota_krawler on Mar 01, 2011, 06:36:04 PM

H

THK Matt · « **Reply #338 on:** Mar 01, 2011, 06:40:51 PM »

Quote from: yota_krawler on Feb 27, 2011, 09:57:04 PM

Got a new grille and headlights off of a 92 4runner. Not sure how I like it. Pics tomorrow

Looks much better bro. do the headlight buckets and everything snap/bolt/screw into place?

yota_krawler · « **Reply #339 on:** Mar 01, 2011, 06:41:58 PM »

The stupid key board on my iPhone kept goin away and I hit post lmao

Anyway, the grille i just put on is off of a 92 4runner. It has bigger head lights instead of the 5x7 sealed head lights. Pickups didnt come with that only 4runners.

yota_krawler · « **Reply #340 on:** Mar 01, 2011, 06:46:42 PM »

Quote from: THK on Mar 01, 2011, 06:40:51 PM

Looks much better bro. do the headlight buckets and everything snap/bolt/screw into place?

No, I had to drill holes for the head light brackets and use bolts with nuts. But other than that it went right in. Ho, remember that 3rd gen extra cab on the 85 extra cab frame with the 4runner head light and grille swap? That's where I got it from, and I had to do something cause I put a 3rd gen grille on my 85...

THK Matt · « **Reply #341 on:** Mar 01, 2011, 11:23:10 PM »

Quote from: yota_krawler on Mar 01, 2011, 06:46:42 PM

No, I had to drill holes for the head light brackets and use bolts with nuts. But other than that it went right in. Ho, remember that 3rd gen extra cab on the 85 extra cab frame with the 4runner head light and grille swap? That's where I got it from, and I had to do something cause I put a 3rd gen grille on my 85...

from that truck or the idea from that lol
I think my 4runner would look much nicer with that swap. a 96-01 swap would be even nicer! i wonder if its possible?

yota_krawler · « **Reply #342 on:** Mar 02, 2011, 09:05:05 AM »

I got the idea from that truck, I was for sale on here for awhile i think in Idaho, it was black. Anyway I like the look, it's growin on my. When I get a front bumper on there it will look good.

I'm not sure about 3rd gen swap. I almost did 1st gen taco, but I think i like this better.

91 ex-cab · « **Reply #343 on:** Mar 02, 2011, 09:16:09 AM »

It would be pretty cool to swap a full front clip off a first gen taco. I might have to give that a try if I can find the parts

THK Matt · « **Reply #344 on:** Mar 02, 2011, 10:49:53 AM »

Quote from: yota_krawler on Mar 02, 2011, 09:05:05 AM

I got the idea from that truck, I was for sale on here for awhile i think in Idaho, it was black. Anyway I like the look, it's growin on my. When I get a front bumper on there it will look good.

I'm not sure about 3rd gen swap. I almost did 1st gen taco, but I think i like this better.

It was in Southern Idaho, I had a loan approved on it and had the loan to give the guy... made arrangements to get it and as i was leaving he told me he sold it already.

94 excab on am 85 reg cab with 85 axles f/r, 94 4runner clip, subaru hood scoop, 2rz, dbl bob, etc.

but yeah looks good Cody.

and a 2st gen taco should line up... may not bolt up directly. but the body lines should. been a while since i measured them out

yota_krawler · « **Reply #345 on:** Mar 02, 2011, 10:56:23 AM »

Yep, that one! I liked that truck a lot! I don't know about second gen taco but first gen taco looks quite a bit like the 3rd gen Pickup

bigarms23 · « **Reply #346 on:** Mar 02, 2011, 11:54:53 AM »

looks better with the 4runner grille and headlights

THK Matt · « **Reply #347 on:** Mar 02, 2011, 07:05:02 PM »

Oops I meant 1st Gen! lol yeah that was a nice looking truck.

86bobbedtoy · « **Reply #348 on:** Mar 02, 2011, 08:54:39 PM »

sweet, i always liked that swap

kiyul4130 · « **Reply #349 on:** Mar 09, 2011, 01:02:36 PM »

dont you have a new bumper on this? wheres the pictures of it?

yota_krawler · « **Reply #350 on:** Mar 10, 2011, 09:34:07 AM »

Haven't gotten it mounted yet just mocked.

kiyul4130 · « **Reply #351 on:** May 03, 2011, 08:27:31 PM »

whats the deal with the pictures? whats up with your old grill?

Dingman. · « **Reply #352 on:** May 03, 2011, 09:58:57 PM »

We welded.that bumper on last weekend

Dingman. · « **Reply #353 on:** May 03, 2011, 10:02:20 PM »

Here's the only picture I have

yota_krawler · « **Reply #354 on:** May 03, 2011, 10:19:14 PM »

Thanks mike, also have started on rock lights. Small LED pods from walmart. I like em, not overly bright but theyll do the trick. Plus they were in clearance!

I'm thinkin of doing a dove tail... No real reason, but if I do the rear then I should do the front? Idk just a thought kickin around upstairs.

Dingman. · « **Reply #355 on:** May 03, 2011, 10:25:58 PM »

Id get it going first, I dont see the real reason for u to dovetail unless your just wanting to for a project it would just be less bed space for you. My $0.02

Dingman. · « **Reply #356 on:** May 03, 2011, 10:27:54 PM »

Heres a pic of just one of those led lights

yota_krawler · « **Reply #357 on:** May 03, 2011, 10:39:39 PM »

i picked up another set tonight. Last one they had. Im going to put one more set up front and then run one in front of the rear tires.

I got the

for new mud flaps, round instead of square. better fit and cleaner looking. so we need to fab that up and weld it on. I also got material for a new tcase cross member.

yota_krawler · « **Reply #358 on:** May 15, 2011, 11:22:09 AM »

My gears fagged off in the front so I gotta buy new gears for the front anyway.

yota_krawler · « **Reply #359 on:** May 16, 2011, 12:33:31 AM »

Need to go wheelin! It's been to effin long!

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

Related Topics