Author Topic: 94 Toy ext cab build: sold... Utah bound on august 8th (Read 77278 times)

Doof · « **Reply #90 on:** Feb 14, 2010, 09:34:17 PM »

Quote from: yota_krawler on Feb 14, 2010, 08:57:45 PM

smooth it out
ya i can anytime just let me know

bondo that pregnant dog and call it good... for sure ill hit you up later this week

yota_krawler · « **Reply #91 on:** Feb 14, 2010, 09:53:46 PM »

cool

they only had 2 cans of paint at ace so i gotta get more. i dont know how many it will take i used the 2 cans and got the hood and fenders. They are thin tho.

Doof · « **Reply #92 on:** Feb 14, 2010, 09:56:54 PM »

for a reference it took me about four and a half cans to get two good coats

yota_krawler · « **Reply #93 on:** Feb 14, 2010, 10:23:41 PM »

you went flat right?

Travis H · « **Reply #94 on:** Feb 14, 2010, 10:28:04 PM »

it took me almost 6 cans to do mine with krylon.

yota_krawler · « **Reply #95 on:** Feb 14, 2010, 10:34:10 PM »

i was gonna buy 6 more, dont really want to do spray paint but whatever.

yota_krawler · « **Reply #96 on:** Feb 21, 2010, 01:18:01 AM »

update...

I moved my truck to my uncles house, i got a garage full of tools, welder, tubing bender etc now. He is building a cj5, only thing stock is the tub. Its pretty cool for a jeep. Alot of blood sweat and tears in it. anyway. He is in the garage and I am under the car port!!!!

I tore down the front axle today and got the new ball joints in. I will finish putting it all back together today. cement is sooooo nice lol. So i should be cruzin now. I will keep it updated. It also gives me motivation cause he is letting it sit there as a favor. So i dont want to take to long.

yota_krawler · « **Reply #97 on:** Feb 21, 2010, 05:04:31 PM »

no i am focusing on the front end. The rear isnt bad i just need to do it. but thats last on my mind right now.

yota_krawler · « **Reply #98 on:** Feb 27, 2010, 05:44:51 PM »

I got my head back today, along with a new water pump, head gasket, blah blah blah. took the front springs off to re pack them. Need to fix my shackle hangers in the front. I knocked one off center and welded it. umm still dont have my front axle back yet but thats cool. its commin together. I have a minor delema with my high steer i have to figure out.

Doof · « **Reply #99 on:** Feb 27, 2010, 06:48:23 PM »

whats wrong with it

yota_krawler · « **Reply #100 on:** Feb 27, 2010, 08:31:27 PM »

it was over heated BAD! valves were burnt, cam was locked up and it was warped. but its all rebuilt and decked with bigger valves. Putney did it.

86bobbedtoy · « **Reply #101 on:** Feb 27, 2010, 09:17:41 PM »

I think he ment the hysteer

yota_krawler · « **Reply #102 on:** Feb 27, 2010, 11:18:20 PM »

oh, the rod ends are bad, and there is a long rod end the the hight steer connects to that i cant figure out what it is. its hard to explain i will post a pic and see if you guys can help me figure it out.

Doof · « **Reply #103 on:** Mar 03, 2010, 08:02:40 AM »

i was talking about the motor...

putney, why does that name sound familiar?

yota_krawler · « **Reply #104 on:** Mar 03, 2010, 10:14:53 AM »

he builds yota motors in chico.

AJ check it out

http://www.putneyscustommachine.com/Home%20-%20Putney%27s%20Custom%20Automotive%20Machine.html

P-DiseToy24 · « **Reply #105 on:** Mar 03, 2010, 01:16:51 PM »

Badass motors in chico

yota_krawler · « **Reply #106 on:** Mar 07, 2010, 12:22:17 AM »

got the head on and fucked around on it today. Not much but still worked. I kinda hit a snag so i quit for the day and had to go to work.

What should i set the valves at? any input?

86bobbedtoy · « **Reply #107 on:** Mar 07, 2010, 12:45:25 AM »

8 and 12 i think, its been years, so double check

lunasicc · « **Reply #108 on:** Mar 07, 2010, 12:45:36 AM »

this is dope!

yota_krawler · « **Reply #109 on:** Mar 07, 2010, 12:49:49 AM »

Quote from: 86bobbedtoy on Mar 07, 2010, 12:45:25 AM

8 and 12 i think, its been years, so double check

thats what i set it at but mike thought he read something about 11 and 7

yota_krawler · « **Reply #110 on:** Mar 07, 2010, 12:50:18 AM »

Quote from: lunasicc on Mar 07, 2010, 12:45:36 AM

this is dope!

thanks, its commin along. I cant wait to get it on the rocks

THK Matt · « **Reply #111 on:** Mar 07, 2010, 01:55:12 AM »

Quote from: yota_krawler on Mar 07, 2010, 12:49:49 AM

thats what i set it at but mike thought he read something about 11 and 7

thats what Marlin likes to run... a tad tight.

Doof · « **Reply #112 on:** Mar 07, 2010, 02:19:59 PM »

thk your still here?

damn you suck...

yota_krawler · « **Reply #113 on:** Mar 07, 2010, 05:03:54 PM »

lol

got mostly moved in to our new place. so i didnt work on the truck toady but i need to swing by putneys shop so i can get my old timing chain cover. i need my bolts back for the water pump and get my oil pump back lol. The i think i will be ready to fully reassemble my motor. I got a locker for my dana44 the other day so my gears will be set up soon. Then i can finish putting that back together.

THK Matt · « **Reply #114 on:** Mar 08, 2010, 01:42:55 AM »

Quote from: Doof on Mar 07, 2010, 02:19:59 PM

thk your still here?

damn you suck...

thats nice.

Dingman. · « **Reply #115 on:** Mar 08, 2010, 08:20:01 AM »

Quote from: THK90 on Mar 07, 2010, 01:55:12 AM

thats what Marlin likes to run... a tad tight.

Thanks, i didn't know if it was stated, or if it was just his preference, but i swore i read that somewhere

THK Matt · « **Reply #116 on:** Mar 08, 2010, 12:10:54 PM »

Quote from: Dingman. on Mar 08, 2010, 08:20:01 AM

Thanks, i didn't know if it was stated, or if it was just his preference, but i swore i read that somewhere

It was in the 3RZ database weirdly i think... idk he did post it (Marlin) at one time.

86bobbedtoy · « **Reply #117 on:** Mar 13, 2010, 10:55:35 PM »

hay anything new?
man u need to bust it out so we all can ge wheelin

yota_krawler · « **Reply #118 on:** Mar 20, 2010, 05:59:17 PM »

motor is almost ready to fire! hope it runs good. Havent got the axle back tho, soon. Tonight i am ordering some

so hopefully i can get this pig up and drivin!

P-DiseToy24 · « **Reply #119 on:** Mar 20, 2010, 08:45:55 PM »

good to see your still goin on

its been a little while...

Whats the order for?

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

yota_krawler [OP]

Related Topics