Glen's budget rebuild

[79coyotefrg]

gotta love those 1ton MCs
wish i could feel how they work compared to the stock ones

i had a v6 master  befor this one,  and with it i could slide all 4 tires  on hot  blacktop

[79coyotefrg]

now  anyone that has a heater  or a/c  that doesnt blow very good, THIS IS WHY

[THK Matt]

[79coyotefrg]

thick and crusty


CLEAN   


and in case you never saw a heater core

[79coyotefrg]

and  that took me thru 3  Darvacets     

[CTENG in KS]

That blade stuff is pretty ghetto Glen.

[Duffil]

That blade stuff is pretty ghetto Glen.

If you are dead set on using it, at least heat it and beat it flat, man.

[79coyotefrg]

If you are dead set on using it, at least heat it and beat it flat, man.

i will be  burning it in  its  almost part of the floor now,  you cant see it  but theres a  matching blade on the underside of the floor  and  3  bolts  thru them,  then welded  in  as well,  they aint movin 

              |    |     |
blade   ----------------
floor    ===========
blade  ----------------
              |    |     |
              ^   ^   ^
           bolts

[unclejpl4x4]

ya i got pull my ac stuff out

[79coyotefrg]

goin back in


got the  pillars  welded up,  just need to grind them smooth  fill the small holes  with  JBweld  or bondo  and  grind smooth again,  sand  and primer




and  what are these little  relay thingies for??   they  are  near  the  emergency brake     

[YotaJosh]

and  what are these little  relay thingies for??   they  are  near  the  emergency brake     

Headlight relays? 

Looking good so far. You just might have it ready in time for the Texas Jambo!

[Gittinit]

Headlight relays? 

Looking good so far. You just might have it ready in time for the Texas Jambo!

Flashers mabye? So haow far off is the jambo at Gilmer any how?

[YotaJosh]

Flashers mabye? So haow far off is the jambo at Gilmer any how?

About 2 weeks away (Jan. 18-20).

[4inchToyotas]

so that's what it looks like back there.  I've got to get my heat and defroster working so I can feel a bit safer with winter wheeling. I'm not chancing frostbite or a crash if I don't have to.

Don't suppose you've got an extra dash pad laying around...

[79coyotefrg]

no extra dash pad  but  i have a  extra dash

they might be headlight relays  but  the turn signal flasher  is  on the pass side and its HUGE

[4inchToyotas]

ha..your disassembled dash looks better than mine.



yes that's a hole on top and what you can see around the cig lighter and a/c controls is all that's hanging on.

[79coyotefrg]

ha..your disassembled dash looks better than mine.



yes that's a hole on top and what you can see around the cig lighter and a/c controls is all that's hanging on.

  man thats a big Hole
HEY  talk to YotaJosh he has a  almost perfect faceplate

[4inchToyotas]

I sended heem a Pee em

[79coyotefrg]

I sended heem a Pee em

you made peepee 

[79coyotefrg]

i know they are some sort of  relay  but for what


http://i220.photobucket.com/albums/dd137/79coyotefrg/rebuild%20pics/Glensrebuild07171.jpg

[4inchToyotas]

buzzers?

[79coyotefrg]

buzzers?

  the buzzers are labeled  "buzzer"    turnsig flashers  are also  labeled "turnsignal flasher"

[DTB]

  the buzzers are labeled  "buzzer"    turnsig flashers  are also  labeled "turnsignal flasher"

dang glen, how'd u get so smart? thats pure genius right there

[79coyotefrg]

i know,  man  them toyota engineers  are SMART

[79coyotefrg]

these little guys were  labeled too but  the  writing was too smudged  to read

[kneedownnate]

I'm pretty darn sure they are headlight relays, but I'd hafta get under the dash of one of my trucks to see.

[4inchToyotas]

With the splices I'd have to say headlight relay. I'll look at mine again tonight.

[79coyotefrg]

With the splices I'd have to say headlight relay. I'll look at mine again tonight.

the blue splices  were added  later   i needed a power supply 

[79coyotefrg]

Bigmike   confirmed,  hes  80%  that they are headlight relays 



well i did a few things,  tightened  down the body bolts,  i can  spray paint  the underside,  too much dang trouble to remove the body again



i'm using the 80 model SR5  tilt steering 



JBweld to fill some holes,   

[79coyotefrg]

first thing today was to mount the a/c  unit,  the old gasket was gone  so i had Mom help me  and i rolled a old sock  and  taped it  to the  unit,  i was  worried it wouldnt work but  it did