Glen's budget rebuild

Started by 79coyotefrg, September 26, 2004, 05:30:02 PM

0 Members and 21 Guests are viewing this topic.

skipnrocks

Quote from: 79coyotefrg on November 24, 2007, 02:57:01 PM
i was gonna do some more  welding but it was 39*  and :rain:


:down:

Wuss.  LOL thats why im not out workin on my stuff today, 30 and snowin here.
Life is too short!!!   Do something with it!!!

WILLYNILLY
http://board.marlincrawler.com/index.php?topic=23944.new#new

79coyotefrg

:haha:  well i have a roof  and 3 walls  but  my back hurt  so i used that as a excuse :disturbed:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

red

lucky's. at least this time i have a garage with a heater behind me and a pair of halogen lights. last january it was snowing, single digits, and i was having to replace the distributor on my 81 gmc pickup :shiver: can you say cold?
read and comment :whip:

USAF EOD tech

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

red

so what are your next mods to your rig glen?
read and comment :whip:

USAF EOD tech

skipnrocks

Quote from: 79coyotefrg on November 24, 2007, 03:58:57 PM
:haha:  well i have a roof  and 3 walls  but  my back hurt  so i used that as a excuse :disturbed:

You should have used the wife wont let me one....  LOL
Life is too short!!!   Do something with it!!!

WILLYNILLY
http://board.marlincrawler.com/index.php?topic=23944.new#new

79coyotefrg

Quote from: red on November 24, 2007, 04:35:21 PM
so what are your next mods to your rig glen?
im gonna  make  some serious  beef  to my hangers,  get the rear axle from the blue truck moved over  to this frame,  then  when its  mobile  move  to workin on the cab cuttin
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

Quote from: skipnrocks on November 24, 2007, 04:54:00 PM
You should have used the wife wont let me one....  LOL
but i aint gotta wifey :dunno:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

skipnrocks

Quote from: 79coyotefrg on November 24, 2007, 05:16:32 PM
but i aint gotta wifey :dunno:

Fine then use that excuse not to use my excuse... :slap:
Life is too short!!!   Do something with it!!!

WILLYNILLY
http://board.marlincrawler.com/index.php?topic=23944.new#new

79coyotefrg

well a picture is worth a  BUNCH  of words



AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

DanS

Glen, just keep posting pics and I'll figure the words out for myself  :yesnod:
DanS
Wow, been looking at my 4Runner rust away too long, need some inspiration and here I will find it...!

85 Toyota 4Runner, solid axle, 22Re, original paint and graphics and not a straight panel to be found!

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way


Gittinit

Hug your kids, pray for a soldier, and don't sweat the small stuff.

my favorite places:
http://www.flatnasty.net/
http://www.orvpark.com/

– fortysixandtwo – sorry, i prefer marlin because aside from gittinit, no one is a know it all a hole

lilbuddy

Quote from: 79coyotefrg on November 26, 2007, 03:37:24 PM
well a picture is worth a  BUNCH  of words


Haha our trucks look similar

RIP Kyota.... you are the man

GET IT!!!

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

DTB

RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

79coyotefrg

i removed the gas tank today,  man :yikes:   had i not had Gittinit's extra heavy duty sliders  i would be dead,   i'll get the bed off  and get pics  but  the sliders  are the only thing that kept that part of the frame from  folding up  and rupturing the gas tank
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

skipnrocks

Mabye you should line the twins up and use them as an obstical course...
Life is too short!!!   Do something with it!!!

WILLYNILLY
http://board.marlincrawler.com/index.php?topic=23944.new#new

DanS

Wow, been looking at my 4Runner rust away too long, need some inspiration and here I will find it...!

85 Toyota 4Runner, solid axle, 22Re, original paint and graphics and not a straight panel to be found!

79coyotefrg

Quote from: skipnrocks on November 26, 2007, 04:40:39 PM
Mabye you should line the twins up and use them as an obstical course...
:nonono:   im gonna use  the bed  and  the roof  of the cab
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Rocksurfer

Maybe you could cut them both down the middle weld the good sides back together and oh nevermind........
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

Duffil

what springs are under the :moon: of your wreck?

topar


79coyotefrg

Quote from: Duffil on November 26, 2007, 06:53:19 PM
what springs are under the :moon: of your wreck?
those are the ones i made from toy/chevy/ford leaves
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

THK Matt

is that your progress pics? :disturbed:
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Jordan7118

I'm not sure if it was ever mentioned, but since Glen is adamant about building up a first gen, I'm all about building a bobbed longbed. You get the bed length of a shortbed, less overhang, and a longer wheelbase.  :beerchug: Woo hoo for that one!

79coyotefrg

Quote from: Jordan7118 on November 27, 2007, 08:59:09 AM
I'm not sure if it was ever mentioned, but since Glen is adamant about building up a first gen, I'm all about building a bobbed longbed. You get the bed length of a shortbed, less overhang, and a longer wheelbase.  :beerchug: Woo hoo for that one!
wanna buy a  good  long bed    frame and bed :dunno:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

THK Matt

2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13