Author Topic: Project BoostedRunner, SOLD (Read 532702 times)

pumkin toy · « **Reply #1050 on:** Mar 21, 2010, 09:34:46 AM »

Quote from: NITE KRAWLERS on Mar 20, 2010, 09:05:10 PM

Sick gas tank bob man, ha ha! Bob n it all!!!Nice photo opps to brah!

yeah brah! bobbin tanks is where its at

WELCOME TO PAGE 36!!

THK Matt · « **Reply #1051 on:** Mar 21, 2010, 11:32:07 AM »

any 90+ V6 truck/4runner will have the dual diaphram booster and shud have the 1" bored MC.

NITE KRAWLERS · « **Reply #1052 on:** Mar 21, 2010, 08:33:27 PM »

Quote from: pumkin toy on Mar 21, 2010, 09:34:46 AM

yeah brah! bobbin tanks is where its at

WELCOME TO PAGE 36!!

Holy wacked BRAH!!!

pumkin toy · « **Reply #1053 on:** Mar 21, 2010, 09:09:09 PM »

ha ha! the smilies are so much fun sometimes!

NITE KRAWLERS · « **Reply #1054 on:** Mar 22, 2010, 05:37:18 PM »

I hear ya dude, some of them are so happy and jump n around and just stoked to be on the forum. those sons a!!!

Tacopride · « **Reply #1055 on:** Mar 22, 2010, 07:57:39 PM »

Quote from: 86toyota on Mar 20, 2010, 10:11:40 PM

x2 night and day difference with the t100 BB mod! love it

Quote from: pumkin toy on Mar 20, 2010, 07:33:52 PM

thanks dude! I did not use the MC from it. I used a 1" bore MC from marlin. idk for sure if the T-100 mc will work or not. As far as the booster goes, it was a direct fit, no mods needed. And yes it was a night and day difference. I would highly recommend puting one on, you will love it

Thanks for the replies guys. I was wondering if any one would know if I could use the MC from that booster? Thanks

Jud · « **Reply #1056 on:** Mar 22, 2010, 09:38:44 PM »

That front xmember looks sik. Your doing a super nice job on this thing. Props man!

pumkin toy · « **Reply #1057 on:** Mar 23, 2010, 04:50:25 PM »

Quote from: Tacopride on Mar 22, 2010, 07:57:39 PM

Thanks for the replies guys. I was wondering if any one would know if I could use the MC from that booster? Thanks

I would imagine you could probly use the booster too. I'm sure the fittings are the same size

Quote from: Jud on Mar 22, 2010, 09:38:44 PM

That front xmember looks sik. Your doing a super nice job on this thing. Props man!

thanks bro!

NITE KRAWLERS · « **Reply #1058 on:** Mar 23, 2010, 10:25:53 PM »

Ya gona have the tranny tunnel built before i get back dude??

pumkin toy · « **Reply #1059 on:** Mar 24, 2010, 05:13:34 PM »

Quote from: NITE KRAWLERS on Mar 23, 2010, 10:25:53 PM

Ya gona have the tranny tunnel built before i get back dude??

ha ha I would like to! thats my plan for this weekend

Jakesteads · « **Reply #1060 on:** Mar 24, 2010, 05:32:41 PM »

TAKE LOTS OF PICS IM COUNTING ON U

pumkin toy · « **Reply #1061 on:** Mar 24, 2010, 06:48:03 PM »

Quote from: Jakesteads on Mar 24, 2010, 05:32:41 PM

TAKE LOTS OF PICS IM COUNTING ON U

ha ha I will bro!

pumkin toy · « **Reply #1062 on:** Mar 28, 2010, 10:06:56 AM »

worked on the new tranny/t-case tunnel yesterday. its pretty much done, I just need to make another piece of sheetmetal that will screw on top and hold the boots in place. I cut the sheetmetal with a large enough hole to give me easy access to the shift covers when i need to remove them. The top cover plate that I am going to make will screw onto that peice and cover up the access hole area. First I needed to re-brace the main supportive crossmember on the body that the seatbelts and seats bolt to. So i peeled back the top layer of sheetmetal and welded in a piece of 1/4"x2" up and over the driveline to the other side to strengthen everything up. Then I hammered the top layer of sheetmetal back down and welded it to the plate. Then I cut out a peice of sheetmetal to cover the driveline area. I spot welded it to the brace first, then hammered it down into place and welded it to the existing floor. For the main tunnel I used 1/4" solid rod to frame out where I wanted the sheetmetal to fit. Then I cut one sheet to cover it all. I tacked it to the 1/4" rod all the way around and worked it down to the rest of the body and welded it up. I ended up putting about a one inch weld every inch and a half all the way around the tunnel. Then I sealed up the rest of it with some 3M seamsealer I got from the body shop. It turned out pretty good, not real pretty, but its functional and it will be covered with carpet anyways!

pumkin toy · « **Reply #1063 on:** Mar 28, 2010, 10:09:00 AM »

pumkin toy · « **Reply #1064 on:** Mar 28, 2010, 10:09:54 AM »

sealed up yo

TheCookieMonster · « **Reply #1065 on:** Mar 28, 2010, 10:13:58 AM »

that came out pretty good. $Beer Chug\'n$

pumkin toy · « **Reply #1066 on:** Mar 28, 2010, 12:07:04 PM »

thanks dude! I will post some more pics when i get the cover plate and boots done

89sastoyo · « **Reply #1067 on:** Mar 28, 2010, 06:31:07 PM »

you should build me one. I have done mine twice and didnt like either of them lol sheet metal is to meticulous for me..

THK Matt · « **Reply #1068 on:** Mar 28, 2010, 06:39:55 PM »

Lookin good K-Leb!

pumkin toy · « **Reply #1069 on:** Mar 28, 2010, 07:03:57 PM »

Quote from: 89sastoyo on Mar 28, 2010, 06:31:07 PM

you should build me one. I have done mine twice and didnt like either of them lol sheet metal is to meticulous for me..

ha ha, probly not man, I hate doing sheetmetal!

Quote from: THK90 on Mar 28, 2010, 06:39:55 PM

Lookin good K-Leb!

they call me C-murder

89sastoyo · « **Reply #1070 on:** Mar 28, 2010, 07:30:50 PM »

for sure yeah sheet metal blows. Im curious to see what you do on the top I was going to build mine similiar but I am most deffinetly stealing the idea of the thicker stuff by the u joint.

pumkin toy · « **Reply #1071 on:** Mar 28, 2010, 08:25:22 PM »

Quote from: 89sastoyo on Mar 28, 2010, 07:30:50 PM

for sure yeah sheet metal blows. Im curious to see what you do on the top I was going to build mine similiar but I am most deffinetly stealing the idea of the thicker stuff by the u joint.

Well for the top I'm planning on cutting out a cover plate that will cover the access hole for the shifters. This plate wil have holes cut in it that are just large enough to use the shifters full range of motion without hitting it. That top plate will also have the rubber shift boots attached to it. I am just going to use self tapping screws to hold the top cover plate on, so if I ever need to pull my shifters and their top plates out, I can just un screw the top plate and I will have plenty of room to get at everything. Yeah I would deffinately reccomend puting in the 1/4" plate up over the driveline. For me it will serve two purposes- if the driveline fails at high rpm's, the thicker material will keep it from ripping through the floor- and it also adds the necessary strength to the main brace that the seatbelts and seats bolt to.

NITE KRAWLERS · « **Reply #1072 on:** Mar 29, 2010, 07:01:09 PM »

Looks sick dude! I'll be over in a bit wit the stick's yo!!!

pumkin toy · « **Reply #1073 on:** Mar 31, 2010, 06:42:41 PM »

did some more work on the tranny tunnel monday. I got the top cover plate cut out at work. I stuck some 1/2" weather strip onto the back of it and screwed it down. Then I screwed down my rubber boots and modified the plastic piece that holds the leather shift boots. I had to weld a couple tabs onto the cover plate so I could attach the plastic section to it. Turned out pretty good! I still want to get my rear heater re-installed and functional, but it is not on the top of my priorities list. I am hoping to get my new rear fenders done this weekend. Here are some pics

pumkin toy · « **Reply #1074 on:** Mar 31, 2010, 06:44:06 PM »

with the leather boots, I want to get new leather boots made, and I also need to get one made for the second case shifter

THK Matt · « **Reply #1075 on:** Mar 31, 2010, 07:12:03 PM »

Oh thats DOPE bro

pumkin toy · « **Reply #1076 on:** Mar 31, 2010, 07:15:57 PM »

thanks dude! should look pretty good when i get all the carpet and interior put back in

95SAS · « **Reply #1077 on:** Mar 31, 2010, 09:01:28 PM »

holy crap you bobbed it!!!!!

SICK! tranny tunnels nice too.

pumkin toy · « **Reply #1078 on:** Mar 31, 2010, 09:38:23 PM »

Quote from: 95SAS on Mar 31, 2010, 09:01:28 PM

holy crap you bobbed it!!!!!

SICK! tranny tunnels nice too.

ha ha! did the bob a while ago. thanks dude!

bigarms23 · « **Reply #1079 on:** Mar 31, 2010, 10:32:27 PM »

the tranny tunnel turned out great

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

pumkin toy [OP]

Related Topics