Author Topic: Re: Rotten Lime, The verdict is failure. (Read 91536 times)

Shamb · « **Reply #240 on:** Jul 16, 2011, 04:53:17 PM »

looks like it's just clamped into place, he could drop the down a bit further. 2 1/2 - 3" judging by the pic's

Dingman. · « **Reply #241 on:** Jul 16, 2011, 04:56:20 PM »

But then the logo is going to be covered... lol jk

Yea i didnt notice he could move it down as much. And im not familiar with how much taller that motor is than a 22re. I just know my 3.4 is alot taller than my old 3.0 and i had to alter the hood for it to close.

zippo · « **Reply #242 on:** Jul 16, 2011, 05:05:22 PM »

Quote from: Dingman. on Jul 16, 2011, 04:51:04 PM

Thats sick!

Not gonna cause any clearance problems when you close the hood is it? I just know the 3.4 swap is really tight, but not really familiar with your swap.

Any higher and it might. Depending what the hose shop says, I am going to try and lower it down a little. I also mounted the 3rz as low as possible with the 6" lift try and give a lower COG.

Shamb · « **Reply #243 on:** Jul 16, 2011, 05:32:03 PM »

I'm actually wondering if your headers gonna get beat up... that is super tight in there.

zippo · « **Reply #244 on:** Jul 16, 2011, 08:03:14 PM »

Quote from: Shamb on Jul 16, 2011, 05:32:03 PM

I'm actually wondering if your headers gonna get beat up... that is super tight in there.

Yeah, only time will tell. But i had no other option. Well other then a stock header and what fun is that!

zippo · « **Reply #245 on:** Jul 18, 2011, 08:32:46 PM »

I ran out of parts and got bored. Flex test. 24" Not to bad for new leafs...

zippo · « **Reply #246 on:** Jul 27, 2011, 11:55:56 AM »

Finally got my header back. Its all shinny and pretty. Bolted up and looked awesome! With some final touches on the housing I have a good 1/4" clearance.

My cats enjoyed the item as well.

zippo · « **Reply #247 on:** Aug 10, 2011, 10:56:46 PM »

PARTS!!

*** YELLER *** · « **Reply #248 on:** Aug 10, 2011, 10:59:23 PM »

looks good

zippo · « **Reply #249 on:** Aug 13, 2011, 11:00:22 PM »

I got the exhaust all welded up and running. It has a nice low rumble. All SS.

http://www.youtube.com/watch?v=SjSigqYNB90

zippo · « **Reply #250 on:** Sep 02, 2011, 04:46:43 PM »

***sigh*** I've been pulling my hair out trying to find a clean 84 - 88 Ext Cab. All I need is the body and interior. All I find is hacked on junk.

HELP...

TacoRunner · « **Reply #251 on:** Sep 02, 2011, 10:35:55 PM »

Hey Zip I just noticed that the bolts holding your ebrake rotor are on backwards. Was this on purpose?

Sorry about the interior and body stuff. Its really getting harder to find good stuff as these things get older.

zippo · « **Reply #252 on:** Sep 06, 2011, 03:49:11 PM »

Come buy it.

http://board.marlincrawler.com/index.php?topic=84303.0

91 ex-cab · « **Reply #253 on:** Sep 06, 2011, 04:23:24 PM »

Sorry to hear man. You worked your

off on every little detail, would of been sweet to see this thing get wheeled $Beer Chug\'n$

zippo · « **Reply #254 on:** Sep 06, 2011, 04:25:06 PM »

I know, It sucks. But its just to much with move cross country, money etc, something has to give and its this. I will be back. No worries.

91 ex-cab · « **Reply #255 on:** Sep 06, 2011, 04:30:23 PM »

Ya life happens. Hopefully 4wu link kits for the next go round?

zippo · « **Reply #256 on:** Sep 06, 2011, 04:31:38 PM »

You know it sitting on a 1st gen.

91 ex-cab · « **Reply #257 on:** Sep 06, 2011, 04:49:54 PM »

crawlin yoda · « **Reply #258 on:** Sep 07, 2011, 10:03:50 AM »

damn iv been reading the posts and gettin pretty stocked about it seenin it done then come to find out its not gonna get finished its like a good book with a bad ending sorry bout ur build it was gonna be sweet

zippo · « **Reply #259 on:** Sep 10, 2011, 01:30:34 PM »

WOW!, Its all sold and gone. Or atleast spoken for. I never thought it would all sell this quick!

pumkin toy · « **Reply #260 on:** Sep 10, 2011, 10:06:47 PM »

thats good you might have it all sold as one package, it would be a long process trying to sell every one of those parts seperately!

zippo · « **Reply #261 on:** Sep 13, 2011, 06:26:51 PM »

So this is what I found for my new project. 2011 Toyota Tacoma Off-Road. 3" Lift goes on Thursday, along with some 33" BFG Km2's

4LoRunner · « **Reply #262 on:** Sep 13, 2011, 07:18:20 PM »

Very clean! How much did u pick this up for? The 3" with 33" KM2s are gonna look clean! Keep us posted!

zippo · « **Reply #263 on:** Sep 13, 2011, 07:22:53 PM »

Its NEW! I picked it up with 125 miles on it.

4LoRunner · « **Reply #264 on:** Sep 13, 2011, 07:52:55 PM »

must of been all test drives haha, hows it feel to be the first owner?

zippo · « **Reply #265 on:** Sep 13, 2011, 08:44:08 PM »

Weird its my first new vehicle. I trying to figure out what all i want todo to it. I'm not sure but i think my wife would kill me if i SAS'ed at this point.

Dingman. · « **Reply #266 on:** Sep 13, 2011, 09:00:51 PM »

Doooo itttt. Lol

Zs Confederate Toy · « **Reply #267 on:** Sep 13, 2011, 09:14:10 PM »

That would be sick if you SAS'd it!!!

91 ex-cab · « **Reply #268 on:** Sep 13, 2011, 10:36:42 PM »

Do it! Here's some motivation,

4LoRunner · « **Reply #269 on:** Sep 14, 2011, 07:09:22 PM »

that is one sexy taco. dope bumpers!

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

zippo [OP]

Related Topics