The Mossy Runner build

Started by Mossyrocks, July 02, 2008, 05:34:50 PM

0 Members and 1 Guest are viewing this topic.

TIMS89CRAWLER

Quote from: Mossyrocks on October 06, 2008, 03:42:21 PM
Well this happened last time and it was the o-rings.  So Ill be yanking it out to fix...  Unless its the copper line.
ya I would put my money on the o-rings.... I was gonna go arb's but I have seen too many people have issues like this with them I think I will go e-lockers when I get rich although im sure they have their issues as well....
Having a 12 second Honda is just like coming out of the closet; You're going to surprise a bunch of people, but in the end you're still gay.

www.choptechfab.com
www.myspace.com/choptechfab

1989 x-cab truck, 96 2rz swap, MC07-R10 duals w/flat belly, doved front, bobbed bed, all pro 5" springs F&R, lincoln locked F&R, 38.5" sx's and still at it!
CHECK THE BUILD
http://board.marlincrawler.com/index.php?topic=39494.0

Mossyrocks

Quote from: 88_Pathy on October 06, 2008, 05:22:30 PM
Only 3.5in round, what kind of space are you workin with?

Bout 3.75"...  haha

Mossyrocks

Well the main part is done... sorta.  Now I gotta figure out the upper tubing and what the hell to do for the damn radiator.







slorunner85

Quote from: Mossyrocks on October 05, 2008, 09:49:56 PM
-5 at the moment.  Drove it last night at -4
i hope that dash does not mean negative caster???  you need positive caster
this build is out of control!!!!!!
exceptional fab work great job
'85 4ruggy linked ft and rr
42"iroks
pro rock 60 arb
14bolt spooled
5.13
marlins dual ultimate

Mossyrocks

Quote from: slorunner85 on October 08, 2008, 12:56:01 AM
i hope that dash does not mean negative caster???  you need positive caster
this build is out of control!!!!!!
exceptional fab work great job



Its at positive...  I need to quit drinking while I work...  haha

Thanks alot man.

4inchToyotas

Quote from: Mossyrocks on October 08, 2008, 01:41:22 AM


Its at positive...  I need to quit drinking while I work...  haha

Thanks alot man.

hmmm about that...might not be as good if you weren't drinkin
2006 Tundra DC 4x4 - DD/Tow (if I can ever find a place to store a trailer)
1983 Hilux - 20/22r Weber 32/36 carb, 4" ProComp suspension, 5.29's Lockrite Front, Spool rear, 34x10.50x15 LTBs

Mossyrocks









you can sorta see the radiator skid in the last pic.


Volcom

84 4Runner
Swapped EFI and a rebuilt 22RE
Marlin Dual Ultimate crawler
Marlin high steer
TG springs
5.29's, Aussie locked front and rear
39.5" Iroks on 15x10 2.5" backspaced wheels
109" wheelbase
Addicted Off Road 8 point cage
Addicted Off Road front bumper

Addicted Off Road

Colorado Marlin members, check out the Colorado section!!!

Yota87Truck

front end looks hella tight with the new bumper.  I like the look you got, its sweet

TIMS89CRAWLER

 :biggthumpup:that bumper is beautiful my friend.... superior fab skills
Having a 12 second Honda is just like coming out of the closet; You're going to surprise a bunch of people, but in the end you're still gay.

www.choptechfab.com
www.myspace.com/choptechfab

1989 x-cab truck, 96 2rz swap, MC07-R10 duals w/flat belly, doved front, bobbed bed, all pro 5" springs F&R, lincoln locked F&R, 38.5" sx's and still at it!
CHECK THE BUILD
http://board.marlincrawler.com/index.php?topic=39494.0

porkchop

85 TRUCK AUSSIE IN FRONT LINCON AROUND BACK MARLIN 4" SPRINGS UP FRONT WITH 63 CHEVYS ON BACK. REBUILT 22R WITH CRAWL CAM AND FEW OTHER THINGS NOTHING HUGE JUST WAITING TO GET PROPANE ON IT. RUNNIN 35'S M/T WITH MY LONGFIELDS 30 SPLINE SUPER AXLES. 4.7's IN T-CASE AND ON THE WAY WITH DUAL CASES. FULL HYDRO WITH TG ROCK ASSULT PUMP AND 2 X 6 AG RAM

pumkin toy

this is deffinately one of the most badass 4runners i have ever seen!!   you have great fab skills! everything looks amazing!
97 4runner Limited
4runner Build Thread http://board.marlincrawler.com/index.php?topic=54076.1410#lastPost

Started my own fab business recently check out the website  www.c4fabrication.com

also follow C4Fab on facebook for regular updates on projects. http://www.facebook.com/pages/C4-Fabrication/454285357953823

THK Matt

You, 4RnrRick, and WillyMammoth should open up a Shop :gap:
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

crawlerdan

Quote from: that HO kid on October 09, 2008, 09:30:30 PM
You, 4RnrRick, and WillyMammoth should open up a Shop :gap:
the bastardized rig that would result from the three of them building together surely would turn our sport on its side.......and then climb everest in 2wd

THK Matt

Quote from: crawlerdan on October 10, 2008, 06:46:14 AM
the bastardized rig that would result from the three of them building together surely would turn our sport on its side.......and then climb everest in 2wd

:rofl: This is something Discovery Channel should Sponsor.
"The Greatest Build-up Build-Off"
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

46&2

85 4Runner Build  /  Cool Foreign Toyotas  /  Toyota: We Want Diesel FB Page    Rockcrawlintoy – i guess moms will put the pups up on the beach when they go fisting

porkchop

Quote from: that HO kid on October 10, 2008, 08:37:09 AM
:rofl: This is something Discovery Channel should Sponsor.
"The Greatest Build-up Build-Off"
it would be better than a lot of that stupid stuff on channel
85 TRUCK AUSSIE IN FRONT LINCON AROUND BACK MARLIN 4" SPRINGS UP FRONT WITH 63 CHEVYS ON BACK. REBUILT 22R WITH CRAWL CAM AND FEW OTHER THINGS NOTHING HUGE JUST WAITING TO GET PROPANE ON IT. RUNNIN 35'S M/T WITH MY LONGFIELDS 30 SPLINE SUPER AXLES. 4.7's IN T-CASE AND ON THE WAY WITH DUAL CASES. FULL HYDRO WITH TG ROCK ASSULT PUMP AND 2 X 6 AG RAM

THK Matt

I KNOW WOULDNT IT?! OCC is cool to watch and so is Overhaulin on TLC... bout the only "build" type shows on regular TV
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13


THK Matt

:gap: can i test drive that for you and let you know how it works.


i want that white Taco
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

CrawlerBrennan

wow man you do the best work iv ever seen whats your day job your truck is excellent
Lets go camping

TIMS89CRAWLER

that bumper came out super sick bro
Having a 12 second Honda is just like coming out of the closet; You're going to surprise a bunch of people, but in the end you're still gay.

www.choptechfab.com
www.myspace.com/choptechfab

1989 x-cab truck, 96 2rz swap, MC07-R10 duals w/flat belly, doved front, bobbed bed, all pro 5" springs F&R, lincoln locked F&R, 38.5" sx's and still at it!
CHECK THE BUILD
http://board.marlincrawler.com/index.php?topic=39494.0

Mossyrocks

thanks everybody.

I just recently started doing this full time...  The 4runner has taken up all my time lately though, broke now though so I gotta get some bumpers built. haha

I.D.G.A.F

If you keep kicking out work/bumpers like that you be like Fab Four in a year or two!

porkchop

put me on the list for a bumper
85 TRUCK AUSSIE IN FRONT LINCON AROUND BACK MARLIN 4" SPRINGS UP FRONT WITH 63 CHEVYS ON BACK. REBUILT 22R WITH CRAWL CAM AND FEW OTHER THINGS NOTHING HUGE JUST WAITING TO GET PROPANE ON IT. RUNNIN 35'S M/T WITH MY LONGFIELDS 30 SPLINE SUPER AXLES. 4.7's IN T-CASE AND ON THE WAY WITH DUAL CASES. FULL HYDRO WITH TG ROCK ASSULT PUMP AND 2 X 6 AG RAM

CrawlerBrennan

so you have a page with the bumpers you make on it or do you do all custom work I'm looking for something other than my Smitty built 
Lets go camping

unclejpl4x4

I :love: the shock towers threw the hood  i had 2 take a double look.  I don't think i have ever seen that before.
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Mossyrocks

#268
Shakedown run at my house... went well









oops...  haha









edit by BigMike: No flip off pictures allowed. Thank you

pumkin toy

lookin damn good bro!!   i love your truck!    so who did all the body work when you cut up the back end?  it really looks like the truck is supposed to be built like that.
97 4runner Limited
4runner Build Thread http://board.marlincrawler.com/index.php?topic=54076.1410#lastPost

Started my own fab business recently check out the website  www.c4fabrication.com

also follow C4Fab on facebook for regular updates on projects. http://www.facebook.com/pages/C4-Fabrication/454285357953823