[Project Reeda]yup. engines out

Started by NorCalToy, June 22, 2008, 01:50:16 PM

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 ... 22
User actions

NorCalToy

#240
July 05, 2008, 10:56:00 AM
Quote from: KDXSR5 on July 05, 2008, 10:52:56 AM
Me either, but read the Pirate FAQ sometime and you will learn LOTS of little things that can be very useful. I believe that is where I learened about those doors.
i  remember reading somewhere that they WERE interchangeable. :dunno:



Quote from: ORANGE CRUSH on July 04, 2008, 10:54:22 PM
The doors arent the same length and the top of the doors are angled different
thanks. thats kinda weird.
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

KDXSR5

#241
July 05, 2008, 10:58:38 AM
Quote from: NorCalToy on July 05, 2008, 10:56:00 AM
i  remember reading somewhere that they WERE interchangeable. :dunno:

2nd gen truck/first gen runner are interchangable, 3rd gen truck/2nd gen runner not so much. I don't know about any other gens of runner though. I will probably never own a runner newer than an 89, so I am not too worried about it.

NorCalToy

#242
July 05, 2008, 11:01:26 AM
maybe thats what it was then...that sucks though.
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

THK Matt

#243
July 05, 2008, 12:18:18 PM
Quote from: KDXSR5 on July 05, 2008, 10:58:38 AM
2nd gen truck/first gen runner are interchangable, 3rd gen truck/2nd gen runner not so much. I don't know about any other gens of runner though. I will probably never own a runner newer than an 89, so I am not too worried about it.

ACTUALLY! the passenger door on a 1st gen runner is DIFFERENT then the 2nd gen truck...
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

KDXSR5

#244
July 05, 2008, 12:20:00 PM
only the passenger door? How so?

THK Matt

#245
July 05, 2008, 12:21:17 PM
Quote from: KDXSR5 on July 05, 2008, 12:20:00 PM
only the passenger door? How so?

the 4runner has TWO door handles on the inside. one for the front passenger... and one for the back passengers.
i cant remember if the driver is the same.
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

KDXSR5

#246
July 05, 2008, 12:30:13 PM
hmm... I have never seen the 4runner door before, but it will still swap onto a truck just fine, unlike 2nd gen runners and 3rd gen trucks.

THK Matt

#247
July 05, 2008, 12:31:32 PM
more then likely
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

NorCalToy

#248
July 05, 2008, 12:33:41 PM
ill go measure the doors alter to find the difference.
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

ontherocks

#249
July 05, 2008, 03:02:08 PM
damn bro, that sux super balls. been there. i say kinda fix it, sas it, and dd/ wheel the :pokinit: outa it! no limits!
4.7 t-case, welded rear, 33s, sr5 buckits, sas sooner than later. http://board.marlincrawler.com/index.php?topic=74399.0

KDXSR5

#250
July 05, 2008, 03:05:10 PM
cut the top off!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

NorCalToy

#251
July 05, 2008, 03:36:18 PM
Quote from: KDXSR5 on July 05, 2008, 03:05:10 PM
cut the top off!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
parents wont let me :down:


"it wont be water proof in the winter"

Quote from: ontherocks on July 05, 2008, 03:02:08 PM
damn bro, that sux super balls. been there. i say kinda fix it, sas it, and dd/ wheel the :pokinit: outa it! no limits!
im gonna try...
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

46&2

#252
July 05, 2008, 04:15:24 PM
Quote from: NorCalToy on July 05, 2008, 03:36:18 PM

"it wont be water proof in the winter"

Anything can be made to be water proof. Theres a kid at my college who rolled a 2nd gen 4runner and turned it into a convertable. It looks pretty sweet.
85 4Runner Build  /  Cool Foreign Toyotas  /  Toyota: We Want Diesel FB Page    Rockcrawlintoy – i guess moms will put the pups up on the beach when they go fisting

NorCalToy

#253
July 05, 2008, 04:20:40 PM
Quote from: fortysixandtwo on July 05, 2008, 04:15:24 PM
Anything can be made to be water proof. Theres a kid at my college who rolled a 2nd gen 4runner and turned it into a convertable. It looks pretty sweet.
:worthless: thats what im tellin her...
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

46&2

#254
July 05, 2008, 05:12:27 PM
Quote from: NorCalToy on July 05, 2008, 04:20:40 PM
:worthless: thats what im tellin her...

Im not taking any classes during the summer, once I start going again this fall if I see it I will take a picture
85 4Runner Build  /  Cool Foreign Toyotas  /  Toyota: We Want Diesel FB Page    Rockcrawlintoy – i guess moms will put the pups up on the beach when they go fisting

79coyotefrg

#255
July 05, 2008, 06:35:55 PM
Quote from: NorCalToy on July 02, 2008, 09:29:57 PM
well the hard work is kinda wasted. ill have pics in a bit.
:headshake:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

THK Matt

#256
July 06, 2008, 12:45:52 PM
Quote from: fortysixandtwo on July 05, 2008, 05:12:27 PM
Im not taking any classes during the summer, once I start going again this fall if I see it I will take a picture

Im counting on them!
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

NorCalToy

#257
July 06, 2008, 12:59:36 PM
Quote from: that TATER kid on July 06, 2008, 12:45:52 PM
Im counting on them!
SHUT UP NEWB! :slap:


but i wanna see em please.
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

THK Matt

#258
July 06, 2008, 01:04:47 PM
Quote from: NorCalToy on July 06, 2008, 12:59:36 PM
SHUT UP NEWB! :slap:


but i wanna see em please.

OH swallow a golf ball. haha
NEWB? oh be quiet turd.
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

46&2

#259
July 06, 2008, 01:29:41 PM
Quote from: that TATER kid on July 06, 2008, 12:45:52 PM
Im counting on them!

When I see it I will get some, just for a mental treat, imagine cutting the top off from behind the rear doors back then replacing it with a canvas top that comes down to the tailgate at about a 45* angle
85 4Runner Build  /  Cool Foreign Toyotas  /  Toyota: We Want Diesel FB Page    Rockcrawlintoy – i guess moms will put the pups up on the beach when they go fisting

toyotanner

#261
July 06, 2008, 02:36:58 PM
hammer and high lift to get a new windshield in that runner and drive the crap out of it :twocents:

NorCalToy

#262
July 06, 2008, 02:46:14 PM
Quote from: toyotanner on July 06, 2008, 02:36:58 PM
hammer and high lift to get a new windshield in that runner and drive the crap out of it :twocents:
gotta get some kinda of windsheild in it then yea, i think thats pretty much what ill do...
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

toyotanner

#263
July 06, 2008, 02:58:04 PM
call the people that come to your house and install the windshield... when they show up just tell them to show you where to hit to make it fit.

NorCalToy

#264
July 07, 2008, 11:11:01 AM
well today im gonna go and see if i can pound the damage out of the drivers fender. ive seen worse get hammered out cleanly so well see how it igoes :dunno:

ill have some pics of it later probably.
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

46&2

#265
July 07, 2008, 11:57:31 AM Last Edit: July 07, 2008, 12:32:49 PM by fortysixandtwo
Here are some inspirational pictures

Fordyce, rolled on its lid, about an hour of trail fixin, and back to wheeling. He has a windshield back in and as far as I know he has fixed his door frame and gotten new doors too. If he can do it on the trail (this was his second time fixing the cab on the trail) you can do it!!










85 4Runner Build  /  Cool Foreign Toyotas  /  Toyota: We Want Diesel FB Page    Rockcrawlintoy – i guess moms will put the pups up on the beach when they go fisting

NorCalToy

#266
July 07, 2008, 11:59:10 AM
i think it came out pretty good, not much i can do about the smaller dents, but they dont matter much anyways.

pics make it kinda hard to see :dunno:

but BEFORE:


and AFTER:


ok and also the second pic makes it look worse, :dunno: i have since hammered some more and sanded out and im getting ready to paint it up again.
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

NorCalToy

#267
July 07, 2008, 12:00:13 PM
he got the cab prettty damn straight after that flop... :yikes:
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

46&2

#268
July 07, 2008, 12:01:16 PM
Quote from: NorCalToy on July 07, 2008, 12:00:13 PM
he got the cab prettty damn straight after that flop... :yikes:

Haha yeah and he did that drunk with nothing but a high lift, a hammer, and a chisel. He has done it a few times though so he has some experience now :gap:


That fender looks pretty good
85 4Runner Build  /  Cool Foreign Toyotas  /  Toyota: We Want Diesel FB Page    Rockcrawlintoy – i guess moms will put the pups up on the beach when they go fisting

DTB

#269
July 07, 2008, 12:02:43 PM
Damn, I need to hurry up and get my exo finished!  :shudder:
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco
Print
Go Up Pages 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 ... 22
User actions