the wookie mobile build-up

Started by baldwookie, October 11, 2007, 12:42:34 AM

0 Members and 5 Guests are viewing this topic.

Print
Go Down Pages 1 2 3 4 5 6 7 8 9 10
User actions

79coyotefrg

#60
February 02, 2009, 06:54:27 AM
:bolt:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

baldwookie

#61
February 08, 2009, 11:07:29 AM
well hell,  was pulling motor doing some cleaning up an found this

goes across the top of  the frame an wraps down a little,  i do plan on installin ap/ or marlin lift kit with new shock hoops.

think this is repairable or waste of time? time for a new frame?
1980 lwb sr5  stock

unclejpl4x4

#62
February 08, 2009, 11:11:15 AM
:shudder:


O man and i thot i had frame problems.  I would clean it up really really good inspect the whole area   take the grinder 2 the crack just a little don't go all the way threw  and weld it :flamer:
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

#63
February 14, 2009, 06:55:10 PM
wookie, you got a welder there or a place to plug mine in :dunno:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#64
February 14, 2009, 06:57:07 PM
we can plate the entire front frame,  are you gonna run histeer??

you dont have too just asking,  if i had it to do again i'd run a drop drag link and rock on
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

baldwookie

#65
February 14, 2009, 07:11:28 PM
nah no welder....normal wall outlets.. not sure if theres any thing bigger wired.... ill check      i want too, run hysteer,  just funds never come together for me.. i always blow it on something else...as soon as ui kicks in im gonna budget  for mc or ap kit so i can lift an hysteer at the same time... be down the road a little bit,  unless i win the lottery or inherit some money
1980 lwb sr5  stock

KYOTA

#66
February 14, 2009, 07:20:20 PM
do like joe said clean it up, V the crack out a little weld it up, grind it flat then fish plate both sides of the frame. when you weld the crack, weld past the end of the crack by a half inch or so on either end, this will help contain the crack from taking off again  :twocents:

79coyotefrg

#67
March 18, 2009, 06:43:09 PM
i looked it over a week or so ago, looked like  it got stuffed with a too long  shock, :yikes:

gotta get his motor in and get it down here so i can weld it up,  unless you dad knows someone up there :dunno:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

baldwookie

#68
March 18, 2009, 07:53:56 PM
oh yeah,  im sure i can get it welded up here... got any pics of motor???      :) i want to  :driving:
1980 lwb sr5  stock

79coyotefrg

#69
March 18, 2009, 08:22:03 PM
no, but i'll try and get some tomorrow
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

baldwookie

#70
March 18, 2009, 08:32:12 PM
cool thnx bro :)    hey know of anyone who sells drop draglnk?  i need to do some comparing
1980 lwb sr5  stock

79coyotefrg

#71
March 19, 2009, 07:01:37 PM
Quote from: baldwookie on March 18, 2009, 08:32:12 PM
cool thnx bro :)    hey know of anyone who sells drop draglnk?  i need to do some comparing
send domino a pm, he had one on his truck, he's got histeer now
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

baldwookie

#72
March 19, 2009, 07:14:28 PM
yeah saw that he had that for sale..ill look into it
1980 lwb sr5  stock

V-Man

#73
March 19, 2009, 07:28:44 PM
Quote from: baldwookie on March 19, 2009, 07:14:28 PM
yeah saw that he had that for sale..ill look into it



He needs a head gasket too... :yupyup:

79coyotefrg

#74
March 19, 2009, 09:12:24 PM
Quote from: V-Man on March 19, 2009, 07:28:44 PM

He needs a head gasket too... :yupyup:
and the hell of it Mike,  you got his hg and he got your oil pan gasket :haha:

:headscratch:  i need to write this all down :willynilly:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

unclejpl4x4

#75
March 20, 2009, 04:33:04 AM
:rofl: this is comical     


So is it fixed yet :boobs:
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

baldwookie

#76
March 20, 2009, 07:46:03 AM
NO  :eek:  :slap:
1980 lwb sr5  stock

ninja turtle

#77
March 20, 2009, 08:15:31 AM
getting your shipping quote today.  :thumbs:

baldwookie

#78
March 20, 2009, 08:34:40 AM
cool thnx sean..... its coming together YAY!!!!
1980 lwb sr5  stock

V-Man

#79
March 20, 2009, 09:04:08 AM
Quote from: 79coyotefrg on March 19, 2009, 09:12:24 PM
and the hell of it Mike,  you got his hg and he got your oil pan gasket :haha:

:headscratch:  i need to write this all down :willynilly:


     :eek: Oil pan gasket....I though he had stole my whole spare motor... :snare:   :yupyup:

baldwookie

#80
March 20, 2009, 09:33:26 AM
:nana:    :bolt!:
1980 lwb sr5  stock

domino

#81
March 24, 2009, 01:16:38 PM
Still need a drop drag link?  I've still got Josh's old one for sale...

YotaJosh

#82
March 25, 2009, 08:41:11 AM
Quote from: domino on March 24, 2009, 01:16:38 PM
Still need a drop drag link?  I've still got Josh's old one for sale...

And I bought it from Glen.  :laugh:
'79 Short Bed Pickup 4x4
'04 4Runner V8 Sport 4x2

baldwookie

#83
March 25, 2009, 09:29:41 AM
might.... id like to go hysteer but need roughly a 4" lift to run.. but the mc an ap kits are just too expensive for me.....   im leaning toward ome lift again... try to get better highwey ride.... i still gotta get the truck running first... too much time on my hands daydreaming
1980 lwb sr5  stock

Jordan7118

#84
March 25, 2009, 04:09:10 PM
Quote from: baldwookie on March 25, 2009, 09:29:41 AM
might.... id like to go hysteer but need roughly a 4" lift to run.. but the mc an ap kits are just too expensive for me.....   im leaning toward ome lift again... try to get better highwey ride.... i still gotta get the truck running first... too much time on my hands daydreaming

I suggest RUFs - rears up front. If you're unsure of all that's involved, search over on pirate. They have a great wealth of info on the RUF setups.

79coyotefrg

#85
March 25, 2009, 05:56:26 PM
no need to search PBB   i got it all up here   
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Jordan7118

#86
March 25, 2009, 08:58:21 PM
Quote from: 79coyotefrg on March 25, 2009, 05:56:26 PM
no need to search PBB   i got it all up here  

That is the funniest little guy ever!!! I wish that was standard on this forum's selection.

Thanks, Glen, for a little chuckle!!!

79coyotefrg

#87
March 26, 2009, 10:50:59 AM
thats how i feel sometimes like a little bit of the old brain oozed out :ack:

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

ninja turtle

#89
March 27, 2009, 07:40:04 AM
shipping your header out today. should be there april 3-4.
Print
Go Up Pages 1 2 3 4 5 6 7 8 9 10
User actions