IFS is gone!! 3.0 Killer on 1 tons

Started by BLACKDOG, April 17, 2006, 08:57:18 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1 2 3 4 5 6 7 8 9 10 ... 16
User actions

BLACKDOG

April 17, 2006, 08:57:18 PM Last Edit: August 06, 2009, 08:40:26 PM by BLACKDOG
First pics of my crawler build, running the MC10 adapter,m gear drive crawl box to chain drive rear case!!

I got to the point of installing the snap ring on the main shaft, but I broke my old pair of snap rings, and broke the new pair I bought :smack:  Gonna get some real heavy duty ones this week :thumbs:


I've been following the marlin online instructions for assembling the crawler, awesoem job guys!! Very easy to do :yupyup:  I can't wait to finish this!!



*EDIT*


Now that I have almost finished moving, it is time to get to the important stuff!!  I have a long list of things I'd like to do to my truck this summer, and decided that I would compile them into one thread  :think: Here is what I want/need to do, and the possible order of events

1. Install duals
2. driveshafts
3. Half doors
4. Rear Bumper
5. Body work/ Paint (.98 walmart paint doesn't hold up well)
6. Rocklights
7. CB
8. If there is time and $$, SA!
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

BLACKDOG

#1
April 17, 2006, 08:58:40 PM
 :biggthumpup:
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

79coyotefrg

#2
April 17, 2006, 09:04:24 PM
:woohoo:   BD  got it goin on :woohoo:


i never got a turtle nob :down:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

*FFC*

#3
April 17, 2006, 09:06:43 PM
:woohoo: Can't wait to see it crawlin :yupyup:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

Rocksurfer

#4
April 17, 2006, 09:14:02 PM
 :bowdown:

                                                                                                                                      :woohoo:  :woohoo:   :woohoo:    :woohoo:     :woohoo:      :woohoo:       :woohoo:        :woohoo:         :woohoo:          :woohoo:          :woohoo:                                                                                                                                                                                                              :woohoo:
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

BLACKDOG

#5
April 17, 2006, 10:14:18 PM
Quote from: 79Coyotefrg on April 17, 2006, 09:04:24 PM
:woohoo:   BD  got it goin on :woohoo:


i never got a turtle nob :down:

:therethere:  sorry glen, you want mine? :hahaha:

Quote from: FordFreakChik on April 17, 2006, 09:06:43 PM
:woohoo: Can't wait to see it crawlin :yupyup:

Me neither!!!  Mabye I won't need that SA after all :dunno:  but I'll put it on there anyway :yupyup:  I'm tired of wearing my tires weaird :screwy:

so, FFC, looks like I'll be ready to push you through the 'con again, :hahaha: this time with my truck!!! :smack:
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

*FFC*

#6
April 17, 2006, 10:17:07 PM
Quote from: BLACKDOG on April 17, 2006, 10:14:18 PM


so, FFC, looks like I'll be ready to push you through the 'con again, :hahaha: this time with my truck!!! :smack:

:slap: Nawww I can make it without any pushin this time :eyebrow:



......hopefully :disturbed:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

synwars

#7
April 18, 2006, 06:38:36 AM
:best: Snap-on worked for me... :popcorn:
"Don't let common sense stop you..."

Build up thread:
http://board.marlincrawler.com/index.php?topic=11425.0

KEEP IT CLEAN PEOPLE!!! :bat:

KDC

#8
April 18, 2006, 03:34:01 PM
Quote from: BLACKDOG on April 17, 2006, 08:57:18 PM
First pics of my crawler build, running the MC10 adapter,m gear drive crawl box to chain drive rear case!!

I got to the point of installing the snap ring on the main shaft, but I broke my old pair of snap rings, and broke the new pair I bought :smack:  Gonna get some real heavy duty ones this week :thumbs:


I've been following the marlin online instructions for assembling the crawler, awesoem job guys!! Very easy to do :yupyup:  I can't wait to finish this!!



Whoa!  Is that MC-10 a prototype?  That's gonna be sweet!
:thumbs:

BLACKDOG

#9
April 18, 2006, 03:58:14 PM
Quote from: KDC on April 18, 2006, 03:34:01 PM
Whoa!  Is that MC-10 a prototype?  That's gonna be sweet!
:thumbs:

:yupyup:  I can't wait to get it in!!! I'm actually working on it as we speak :thumbs:
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

BLACKDOG

#10
April 18, 2006, 04:18:32 PM
New pics!!! :drool:
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

BLACKDOG

#11
April 18, 2006, 04:24:17 PM
I've got the reduction box and the adapter ready to be bolted together (I think) but I'm not sure what the two things in picture6 are?  Can anyone help me out?  Please?  I'd like to get these together tonight :crossed: 


Also, anyone whose put these together, does it look like I'm missing anything?  I don't think so, I've followed the dirctions from the marlincrawler.com site very closely, so I'm not too worried, but a double check never hurts :thumbs:
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

MiniSimp

#12
April 18, 2006, 04:27:11 PM
Sweet!

BigMike

#13
April 18, 2006, 04:38:35 PM
Nice!! Now you REALLY don't have an excuse to not bring your truck to the ROUND UP :tease:
Check out our new Rock Crawling Videos!
2016 56-speed 580:1 Tacoma Rock Crawler   
1981 36-speed 511:1 3RZ-FE Rock Crawler
1987 6-speed Supercharged 4A-GZE MR2		Instagram: @SlowestTacoma
Things are only impossible until they are not.
"The worst of both worlds, the best of neither." -abnormaltoy
"An informed question. But difficult to answer. I am what you see." -Nanaki

BLACKDOG

#14
April 18, 2006, 04:43:23 PM
Quote from: BigMike on April 18, 2006, 04:38:35 PM
Nice!! Now you REALLY don't have an excuse to not bring your truck to the ROUND UP :tease:
yu huh :yupyup:


:psss: I still have a 3.0  :smack:  that was the reason last year :headshake:
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

79coyotefrg

#15
April 18, 2006, 07:38:49 PM
looks like the taller one is the tcase to tranny coupler,  aint sure about the other but looks like a seal adapter  probably for the geardrive case to chaindrive case :dunno:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

BLACKDOG

#16
April 18, 2006, 07:47:05 PM
Ok, i think you're probably right on the first one, but not so sure on the second one.  THere really isn't a good place for it to go (these things kinda just fall together it seems like)  but mabye it'll become clear when I pull the t-case outta the truck :dunno:

Thanks Glen :thumbs:  :beerchug:

Quote from: BLACKDOG on April 18, 2006, 04:24:17 PM
I've got the reduction box and the adapter ready to be bolted together (I think) but I'm not sure what the two things in picture6 are?  Can anyone help me out?  Please?  I'd like to get these together tonight :crossed: 


Also, anyone whose put these together, does it look like I'm missing anything?  I don't think so, I've followed the dirctions from the marlincrawler.com site very closely, so I'm not too worried, but a double check never hurts :thumbs:
ANyone else?
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

Rocksurfer

#17
April 18, 2006, 08:28:23 PM
I am soooooooo jealous!!!
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

kneedownnate

#18
April 18, 2006, 10:31:10 PM
You lucky bastid!  I'm glad you're finally getting some goodies fo yo ride :yesnod:
RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!

synwars

#19
April 18, 2006, 10:32:12 PM
Quote from: BLACKDOG on April 18, 2006, 07:47:05 PM
ANyone else?

The black double lipped seal looks like a tranny output seal. :dunno: That's about all I got...

:therethere:

I am confident that once you have the t-case out you will be able to put all the pieces of the puzzle together correctly. :thumbs:
"Don't let common sense stop you..."

Build up thread:
http://board.marlincrawler.com/index.php?topic=11425.0

KEEP IT CLEAN PEOPLE!!! :bat:

Brandon

#20
April 20, 2006, 05:41:03 PM Last Edit: April 20, 2006, 05:46:10 PM by Brandon
those aren't snap rings ;)

they are lock rings, you need lock ring pliers..

(the red handle dudes)




looks nice! Let me know if ya need a hand or need to borrow anything!
Brandon Miller
RCRC, Sacramento, CA
www.RiverCityRockCrawlers.com

johnnygalt

#21
April 20, 2006, 08:53:29 PM
BD,

Looks like Scott made 2, b/c I have the same chain drive adaptor in my garage  :greengrin:  I haven't installed mine yet, I need to get my SAS done first.  Marlin sent me the same two couplers as well.  Wish I could be of some help...but I'll be following your thread!!!

BLACKDOG

#22
April 20, 2006, 09:06:28 PM Last Edit: April 21, 2006, 02:14:54 PM by BLACKDOG
Quote from: Brandon on April 20, 2006, 05:41:03 PM
those aren't snap rings ;)

they are lock rings, you need lock ring pliers..

(the red handle dudes)

looks nice! Let me know if ya need a hand or need to borrow anything!
Brandon, no, I broke them on the mainshaft, going into the adapter :yupyup:  there is a legitamate snap ring on that side.  However, I did use my snap ring pliers on the lockrings as well :thumbs: took a little finessing, but it worked.  Thanks for the offer, so far its going well, but when I get it done, Ill have to bring it by to show ya :yupyup:

Quote from: johnnygalt on April 20, 2006, 08:53:29 PM
BD,

Looks like Scott made 2, b/c I have the same chain drive adaptor in my garage  :greengrin:  I haven't installed mine yet, I need to get my SAS done first.  Marlin sent me the same two couplers as well.  Wish I could be of some help...but I'll be following your thread!!!

I was wondering who got the other set :yupyup:  I do indeed have #2  :thumbs:  I don't think that is quite right though, #2 being in before #1?? :headscratch: 

I'm going to do my SA later this summer, using a square d-shaft so I don't have to rebuild it later :crossed:
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

Brandon

#23
April 20, 2006, 10:15:49 PM
The pic really wasn't of anything but the tool - I don't recall ANY snap rings in the case?

Anyway, can't wait to see it done!
Brandon Miller
RCRC, Sacramento, CA
www.RiverCityRockCrawlers.com

johnnygalt

#24
April 20, 2006, 10:22:36 PM
funny, sounds like our order of mods is just reversed  :gap:  I'm running a high pinion, so not sure if I'll need to run a CV shaft, but I want the ability to drive at 50mph in 4wd so no square tube shaft...

synwars

#25
April 21, 2006, 06:16:14 AM Last Edit: April 21, 2006, 06:20:37 AM by synwars
Quote from: Brandon on April 20, 2006, 10:15:49 PM
The pic really wasn't of anything but the tool - I don't recall ANY snap rings in the case?

I think he is refering to a snap ring like the one pictured below on the main shaft. It's a hefty little guy. Two sets of hands are nice to have when installing, but it can be done with one.

Yes? No?
"Don't let common sense stop you..."

Build up thread:
http://board.marlincrawler.com/index.php?topic=11425.0

KEEP IT CLEAN PEOPLE!!! :bat:

BLACKDOG

#26
April 21, 2006, 02:14:19 PM
Quote from: synwars on April 21, 2006, 06:16:14 AM
I think he is refering to a snap ring like the one pictured below on the main shaft. It's a hefty little guy. Two sets of hands are nice to have when installing, but it can be done with one.

Yes? No?
yes, that little b*std is the one :yupyup:

I bought some lisle heavy duty snap ring pliers, those strecthed that snap ring far enough that I could slide it on by myself :thumbs:  its nice having good tools for the job

Quote from: Brandon on April 20, 2006, 10:15:49 PM
The pic really wasn't of anything but the tool - I don't recall ANY snap rings in the case?

Anyway, can't wait to see it done!

Yeah, that was my bad, I'll fix it :smack:  I was thinkin those were uploaded from your comp, so they wouldn't show up on the quote, didn't think that they may have been linked from rcrc4x4

:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

synwars

#27
April 21, 2006, 03:18:05 PM
Quote from: BLACKDOG on April 21, 2006, 02:14:19 PM
yes, that little b*std is the one :yupyup:

I bought some lisle heavy duty snap ring pliers, those strecthed that snap ring far enough that I could slide it on by myself :thumbs:  its nice having good tools for the job

Good to hear, keep it up!!!
"Don't let common sense stop you..."

Build up thread:
http://board.marlincrawler.com/index.php?topic=11425.0

KEEP IT CLEAN PEOPLE!!! :bat:

johnnygalt

#28
May 10, 2006, 02:18:26 PM
Bump.  Any update?

BLACKDOG

#29
May 15, 2006, 08:23:08 PM Last Edit: May 15, 2006, 08:44:49 PM by BLACKDOG
Quote from: johnnygalt on May 10, 2006, 02:18:26 PM
Bump.  Any update?

Not really, I've got the crawler completely together, just need the time to drop it in, pickup my front driveshaft from yotee, and order my rear.  I'm probably gonna start memorial day weekend, after I'm done moving
:hyper: I can't wait!!!

Here's some pics, My puppy max decided he was gonna help
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent
Print
Go Up Pages1 2 3 4 5 6 7 8 9 10 ... 16
User actions