IFS is gone!! 3.0 Killer on 1 tons

Started by BLACKDOG, April 17, 2006, 08:57:18 PM

0 Members and 9 Guests are viewing this topic.

Print
Go Down Pages 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
User actions

fordh8r

#270
February 18, 2009, 08:57:30 PM Last Edit: February 18, 2009, 09:09:19 PM by fordh8r
So...what did these axles come from? 10B from a chevy...........D60 from...ford?  :headscratch:

cdgvw1

#271
February 23, 2009, 08:03:44 PM
Quote from: fordh8r on February 18, 2009, 08:57:30 PM
So...what did these axles come from? 10B from a chevy...........D60 from...ford?  :headscratch:

Yup, the 60 is out of an 81 Ford.

fordh8r

#272
February 23, 2009, 10:14:33 PM
Quote from: cdgvw1 on February 23, 2009, 08:03:44 PM
Yup, the 60 is out of an 81 Ford.
Oh, cool! So same bolt pattern then.  :thumbs:

THK Matt

#273
February 23, 2009, 10:19:40 PM
Where's the update!
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

BLACKDOG

#274
February 23, 2009, 11:00:50 PM
Quote from: cdgvw1 on February 23, 2009, 08:03:44 PM
Yup, the 60 is out of an 81 Ford.

Chris! Nice to see you on here! :gap:

No update right now, I got 2 new sets of jackstands, and started pulling the 10bolt apart.  Didn't get too far, Been working on yota stuff too much, left all the tools I need to work on this stuff at my folks house :down:  Haven't needed them for the past 2 years, but I guess now I do :gap:
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

fordh8r

#275
February 23, 2009, 11:40:54 PM
Quote from: BLACKDOG on February 23, 2009, 11:00:50 PM
No update right now, I got 2 new sets of jackstands, and started pulling the 10bolt apart.  Didn't get too far, Been working on yota stuff too much, left all the tools I need to work on this stuff at my folks house :down:  Haven't needed them for the past 2 years, but I guess now I do :gap:

You only have 6 more months to work on it till MCR.  :whip:  :yupyup: :biggthumpup:

What an excuse to make good use of those tools again, too.  :gap:

THK Matt

#276
February 23, 2009, 11:43:26 PM
man I want to make MCR
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

fordh8r

#277
February 23, 2009, 11:45:40 PM
Quote from: ThatHOKid on February 23, 2009, 11:43:26 PM
man I want to make MCR
:beerchug: Six more months.........  :thumbs:

BLACKDOG

#278
February 23, 2009, 11:51:05 PM
Quote from: fordh8r on February 23, 2009, 11:40:54 PM
You only have 6 more months to work on it till MCR.  :whip:  :yupyup: :biggthumpup:

What an excuse to make good use of those tools again, too.  :gap:

I'll be there :gap:  I'm hoping to have it done by june :yesnod: 

Need to do my taxes, and see what kind of return I get.  A good amount of that is going into the truck :yesnod: 
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

fordh8r

#279
February 23, 2009, 11:54:26 PM
Quote from: BLACKDOG on February 23, 2009, 11:51:05 PM
I'll be there :gap:  I'm hoping to have it done by june :yesnod: 
Sweet!  :bowdown:

Quote from: BLACKDOG on February 23, 2009, 11:51:05 PM
Need to do my taxes, and see what kind of return I get...........  A good amount of that is going into the truck :yesnod: 
:crossed: :twocents:........  :thumbs: :yupyup: :beerchug:

THK Matt

#280
February 23, 2009, 11:55:48 PM
Quote from: fordh8r on February 23, 2009, 11:45:40 PM
:beerchug: Six more months.........  :thumbs:

don't give me a heart attack man lol.
ill be lucky to have a rig by then, at this rate :rofl:

I need to source a 79-85 front axle though as well.
I have a few at my junk yard I can get a hold of I'm sure and service it and get it ready to hang under a rig I end up with :D

Quote from: BLACKDOG on February 23, 2009, 11:51:05 PM
I'll be there :gap:  I'm hoping to have it done by june :yesnod: 

Need to do my taxes, and see what kind of return I get.  A good amount of that is going into the truck :yesnod: 

Ohhhhh  :beerchug: Can't wait to see this thing on some full widths.
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

79coyotefrg

#281
February 24, 2009, 09:26:57 AM Last Edit: February 24, 2009, 09:33:43 AM by 79coyotefrg
Quote from: ThatHOKid on February 23, 2009, 11:55:48 PM
don't give me a heart attack man lol.
ill be lucky to have a rig by then, at this rate :rofl:

I need to source a 79-85 front axle though as well.
I have a few at my junk yard I can get a hold of I'm sure and service it and get it ready to hang under a rig I end up with :D


:slap: so you need to do alot less :blah:  and alot more and
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

BLACKDOG

#282
March 05, 2009, 12:29:40 PM
Got a little bit done:

Got the front end on jackstands for ease of working on it.


And, no more back legs :gap:





:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

BLACKDOG

#283
March 08, 2009, 07:04:11 PM
So I'm looking at some gear ratio options.  Its looking to me like the 10 bolt gear ratios available only go up to 5.13 


I had 5.29s in my yota stuff, I guess stepping down a little doesn't hurt, but I was hoping to run 5.38s.  I'm honestly not finding a whole lot in terms of information on the 10 bolt.  I know its out there, just haven't found it yet.  Am I correct in 5.13 being the lowest ratio?    I plan on running 36-38" tires for the time being.
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

IronClad

#284
March 08, 2009, 07:20:07 PM
5:56 is the lowest 10bolt ratio  you should be able to get 5.38's  let me see what i can find   i run 5.13's with 4dees and its not to bad


here ya go 

http://www.ringpinion.com/ProductDetails.aspx?ProdID=1643
Annihilation  Fabrication
Do you need a Hammer?
My build thingy... http://board.marlincrawler.com/index.php?topic=39885.0
（╯°□°）╯︵ ┻━┻
Word hard, Keep your head in the game and if anyone gets in your way tell them you don't give a damn !

bigarms23

#285
March 08, 2009, 10:14:46 PM
reno driveline and gear offers a 538s for the 10bolt i almost went with those
88 4runner 2016 5.3 auto atlas 2 on tons and tons of fun

BLACKDOG

#286
March 09, 2009, 08:13:30 PM
Quote from: bigarms23 on March 08, 2009, 10:14:46 PM
reno driveline and gear offers a 538s for the 10bolt i almost went with those

:thumbs: cool.  I might have to check them out.



Quote from: IronClad on March 08, 2009, 07:20:07 PM
5:56 is the lowest 10bolt ratio  you should be able to get 5.38's  let me see what i can find   i run 5.13's with 4dees and its not to bad


here ya go 

http://www.ringpinion.com/ProductDetails.aspx?ProdID=1643
Thanks Ironclad!
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

BLACKDOG

#287
March 09, 2009, 08:22:41 PM
Got some work done on my front axle today.

View from my workspace :gap:


Pulled the cover, let the gear oil drain out.  Let the work begin!


Pass. side hub





Question:

What is that thing inside?  It appears to be some sort of nut, but I can't tell?  Need a special tool to remove?  I got the nut that looks like a gear off this side, got it to spin of with a screw driver.  Drivers side, not so lucky.  I'm guessing there's a special socket for that piece as well?



I'm guessing once I get that off, I can pull the rotor of the spindle? 

Ball joints were not working with me today




Pass. side done






When you don't have the right tool for the job, make do:


Both ball joints on the drivers side decided to cause problems




scuffed up the ears on this side a bit  :_oops:



Gears are out:


Dont think the carrier is supposed to look like that


pinion




still gotta pull this out of the ear.


:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

KYOTA

#288
March 09, 2009, 08:24:59 PM
  full widths buddy!  I'm expeting see you at the roundup this year  :beerchug: you hear from rich lately?

BLACKDOG

#289
March 09, 2009, 08:27:28 PM
Quote from: KYOTA on March 09, 2009, 08:24:59 PM
 full widths buddy!  I'm expeting see you at the roundup this year  :beerchug: you hear from rich lately?

:gap: I'll be there! 

Yeah, I talk to him about once a week.  He's keeping busy.  Working at the community college down there, and doing his drill weekends every month.  He's looking for LEO jobs, I keep telling him to move his happy :moon: up here.
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

Duffil

#290
March 09, 2009, 08:33:54 PM
lookin for something like this?

BLACKDOG

#291
March 09, 2009, 09:02:47 PM
Quote from: Duffil on March 09, 2009, 08:33:54 PM
lookin for something like this?



I'm thinking probably so :gap: 
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

cdgvw1

#292
March 09, 2009, 11:25:14 PM
I can ups mine to ya if you want..  or use a pair of needle nose pliers..    :hammerhead:

Chris :biggthumpup:

IronClad

#293
March 09, 2009, 11:29:28 PM
btw that ring inside the hub is basicly the same idea as the tin piece in a toyota  wheelhub  it has a small pin on it and it just slides off the spindle with some needle nose pliers might have to work at it a bit
Annihilation  Fabrication
Do you need a Hammer?
My build thingy... http://board.marlincrawler.com/index.php?topic=39885.0
（╯°□°）╯︵ ┻━┻
Word hard, Keep your head in the game and if anyone gets in your way tell them you don't give a damn !

BLACKDOG

#294
March 10, 2009, 09:21:36 AM
gotcha.  I only messed with it for a few minutes, trying to pry it out with a screw driver.  I'll pull it out tommorow.
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

BLACKDOG

#295
March 11, 2009, 02:01:11 PM
Started to pull the 60 apart.  Got stuck, don't have the right tools, but I got the gears out!





gotta get a socket for this nut


anyone know if these are studs or bolts through here?  either way, they're just spinning in the housing.  won't come out.  I broke the bolts or the studs loose, whatever they are, instead of the nut :smack:



axles out


:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

*FFC*

#296
March 11, 2009, 02:30:14 PM
Quote from: Duffil on March 09, 2009, 08:33:54 PM
lookin for something like this?



I have one :slap: Totally forgot you'd need it lol.  Hey, it might even be in the Migo. Look real good in my tool bag/box whatever's in there - I don't even remember what my tools are in.  :doh: :thud:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

BLACKDOG

#297
March 11, 2009, 02:33:57 PM
Quote from: *FFC* on March 11, 2009, 02:30:14 PM
I have one :slap: Totally forgot you'd need it lol.  Hey, it might even be in the Migo. Look real good in my tool bag/box whatever's in there - I don't even remember what my tools are in.  :doh: :thud:
Saweet!  I'll check.  Thank you!
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

*FFC*

#298
March 11, 2009, 02:34:45 PM
Quote from: BLACKDOG on March 11, 2009, 02:33:57 PM
Saweet!  I'll check.  Thank you!

Fo Sho - I'll check at home too just in case I :hammerhead: have it in my toolbox.
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

BLACKDOG

#299
March 12, 2009, 11:34:44 AM
Quote from: *FFC* on March 11, 2009, 02:34:45 PM
Fo Sho - I'll check at home too just in case I :hammerhead: have it in my toolbox.

:thumbs: cool, thanks.  I may just go buy one, to have one myself.
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent
Print
Go Up Pages 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
User actions