Finally, SAS'ed the Migo... and she sits.....

Started by *FFC*, January 19, 2006, 02:05:22 PM

0 Members and 1 Guest are viewing this topic.

*FFC*

I realized yesterday that the stock exhaust for the Migo is sitting in the bed of my Ford :woohoo: So now if it doesn't smog then I can slap the stock exhaust back in and it should pass with flying colors :hyper: I was so sure I threw it away :thud: But I found it!!!

No luck yet, with the holidays comin up, I don't know what's gonna happen when.  The break in in the truck totally messed up our trailer usage.  They got the keys to the hitch lockS and we have to drill them off, however we can't do that till we buy new ones cuz we don't want the trailer getting jacked, so we've gotta wait till we buy new hitch locks, and that's another $40 we can't afford :rivers:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

weirdtimes_7

Anything new on the little beast.. any new pics????

military_stang
:respect:

*FFC*

Naw, nothing new lately.  It's been sitting in the garage since the roundup :down: BUT I have a few bucks saved up I'm planning on getting some 5:29's for the axles, smog/register before MCR6.. and maybe even gear the Tcase, but that's after the axles and the smog/reg. 

No new pics either, as I can hardly see it in my garage :rivers:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

iNfErNaL

Quote from: FordFreakChik on April 27, 2007, 11:59:39 AM
Naw, nothing new lately.  It's been sitting in the garage since the roundup :down: BUT I have a few bucks saved up I'm planning on getting some 5:29's for the axles, smog/register before MCR6.. and maybe even gear the Tcase, but that's after the axles and the smog/reg. 

No new pics either, as I can hardly see it in my garage :rivers:
You better get on it,you got a little over 4 months.
WWW.GLOBALOFFROADSUPPLY.COM

Support Your Local Brawlers
www.RockBrawlers.com 

www.offroadtruckshow.com

Cheesemaker

Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

*FFC*

Quote from: Infernal on April 27, 2007, 12:01:30 PM
You better get on it,you got a little over 4 months.

I've been lookin for 5:29 3rds every chance I get :tantrum: I can't find em... :smack:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

unclejpl4x4

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Rocksurfer

The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

Duffil


Cheesemaker

It'll be a mad rush at the last minute, like last year!  You gonna stick with your current wheelie bar, or ya gonna redesign one?  :joke:
Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

*FFC*

Quote from: cheesemaker on April 28, 2007, 01:40:16 AM
It'll be a mad rush at the last minute, like last year!  You gonna stick with your current wheelie bar, or ya gonna redesign one?  :joke:

:rofl: i'm not sure yet.  if I have gears then I won't really need it so :dunno: We'll see.  Gears are my number 1 priority, and I MIGHT need a clutch :crossed:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

rockscrambler

 :flamer: come on girl  :_order: work work work.
we're born,we roll over,we crawl,we walk,we run,we drive,we install cages,we wheel,we crawl,we roll over,the circle of life is complete.!

"we sleep peaceably in our beds because rough men stand ready in the night to bring violence upon those who would do us harm" to you I say thank you
87 Chevy K5 V10 tonka truck,87 Toyota 4runner
83 Jeep CJ8,sold-76 Dodge W200 & 87 Ford broncoII

Blingn


rockscrambler

we're born,we roll over,we crawl,we walk,we run,we drive,we install cages,we wheel,we crawl,we roll over,the circle of life is complete.!

"we sleep peaceably in our beds because rough men stand ready in the night to bring violence upon those who would do us harm" to you I say thank you
87 Chevy K5 V10 tonka truck,87 Toyota 4runner
83 Jeep CJ8,sold-76 Dodge W200 & 87 Ford broncoII

*FFC*

As both of our trucks are on empty, and we're not buying gas today :nope: we'll both be going straight home from work, and I'm setting up camp in teh back yard with the Tcase.. gonna pull'er apart and see what's up :eek:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

Wermz84

I like to Drive!

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Rocksurfer

Quote from: FordFreakChik on May 15, 2007, 08:12:29 AM
As both of our trucks are on empty, and we're not buying gas today :nope: we'll both be going straight home from work, and I'm setting up camp in teh back yard with the Tcase.. gonna pull'er apart and see what's up :eek:

Oh Gawd you doing this too, everyone at my work is doing this. So you hurt the little gas store at the corner but you ain't gonna hurt big oil, and those are the ones that count. The only way to get them to sit up and take notice is to stop driving unnecessarily everyday then they'll realize that they've priced themselves outside the market.  That's what they do boost the price and see where we stop buying and then lower it until we start again and usually we start way before we should. Just think if we put our skinny pedals away for a month and just got to where we needed to be only. No wheelin', biking, quads, boats, etc. etc. Then they'd really drop those prices.
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

blackdiamond

Quote from: Rocksurfer on May 15, 2007, 09:38:39 AM
Oh Gawd you doing this too, everyone at my work is doing this. So you hurt the little gas store at the corner but you ain't gonna hurt big oil, and those are the ones that count. The only way to get them to sit up and take notice is to stop driving unnecessarily everyday then they'll realize that they've priced themselves outside the market.  That's what they do boost the price and see where we stop buying and then lower it until we start again and usually we start way before we should. Just think if we put our skinny pedals away for a month and just got to where we needed to be only. No wheelin', biking, quads, boats, etc. etc. Then they'd really drop those prices.

It's not going to impact the oil companies at all and the only way it might affect the local stores is if they need todays profits to pay a bill today or tomorrow which is very unlikely.  I assume everyone will go back to getting gas at the same places so it makes not difference at all.  As long as everyone is still driving around, the same amount of fuel is consumed.  If everyone parked their auto's for a tank of gas then maybe someone would notice from the lost revenue, but even that wouldn't really matter.
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

*FFC*

:slap: it's a good excuse to stay home and work on my rig :gap: :shhh:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

Duffil


*FFC*

So Matt's researching right now for the overhaul procedure :woohoo: Let's see how well this goes...


any recommendations for an overhaul kit? :disturbed: Or just pull it apart then ask?  ???
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

unclejpl4x4

take it apart then go get some bubbleyum
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

*FFC*

"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

*FFC*

:blah: :blah: I pulled the adapter off the front of the tcase today.  I think I found out why the leak was so bad.  The gasket was saturated and didn't have any effect on the bottom of the tcase.  I pulled the gasket off, cleaned it up real good, put some sealer in, and bolted it back together :crossed: I'll put fluid in it in a bit, but I have to head out of town in 30 mins and I"m off to :bath: Matt's got the pics :disturbed: :snapshot:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

Blingn

Here's workin on the Tcase... didn't get none of it apart :doh:



And the :pokinit: gasket that saturated


MiniSimp

Quote from: BLINGN XJ on May 20, 2007, 10:59:38 PM
Here's workin on the Tcase... didn't get none of it apart :doh:
So you did....what.....clean it?

*FFC*

Quote from: MiniSimp on May 21, 2007, 07:27:48 AM
So you did....what.....clean it?

:shake:

I pulled the front off and found out I *think* the leak was due to a :pokinit: gasket.  So I cleaned the surface and resealed it.  I'll put some fluid in it before I mount it back up and make sure the leakin's stopped.  Not much done to it, and it's a pain to get it on and off the Migo, but it had to be removed in order to pull the adapter off :shake: The bearing seems fine, guess i'll find out when I get some :bling: to get some gear oil :disturbed:
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

Blingn

I cant wait till after moonrocks I want FFC to concentrate on only the amigo for mcr!! NO MORE JEEP DISTRACTIONS, she has got big plans, hope she lets me help her.  :thumbs: